Form 10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

(Mark One)

  þ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2012

OR

 

  ¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                      to

Commission File Number 1-12981

 

 

AMETEK, Inc.

(Exact name of registrant as specified in its charter)

 

Delaware

 

14-1682544

(State or other jurisdiction of incorporation or organization)   (I.R.S. Employer Identification No.)

1100 Cassatt Road

P.O. Box 1764

Berwyn, Pennsylvania

 

19312-1177

(Address of principal executive offices)

  (Zip Code)

Registrant’s telephone number, including area code: (610) 647-2121

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

 

Name of each exchange on which registered

Common Stock, $0.01 Par Value (voting)

  New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of Class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  þ        No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes  ¨        No  þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ        No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  þ        No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer  þ   

Accelerated filer  ¨

   Non-accelerated filer  ¨   

Smaller reporting company  ¨

      (Do not check if asmaller reporting company)   

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨        No  þ

The aggregate market value of the voting stock held by non-affiliates of the registrant was approximately $8.1 billion as of June 29, 2012, the last business day of the registrant’s most recently completed second fiscal quarter.

The number of shares of the registrant’s Common Stock outstanding as of January 31, 2013 was 243,281,716.

Documents Incorporated by Reference

Part III incorporates information by reference from the Proxy Statement for the Annual Meeting of Stockholders on May 8, 2013.

 

 

 


Table of Contents

AMETEK, Inc.

2012 Form 10-K Annual Report

Table of Contents

 

          Page  
PART I   

Item 1.

   Business      2   

Item 1A.

   Risk Factors      11   

Item 1B.

   Unresolved Staff Comments      15   

Item 2.

   Properties      16   

Item 3.

   Legal Proceedings      16   
PART II   

Item 5.

   Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities      17   

Item 6.

   Selected Financial Data      20   

Item 7.

   Management’s Discussion and Analysis of Financial Condition and Results of Operations      22   

Item 7A.

   Quantitative and Qualitative Disclosures About Market Risk      36   

Item 8.

   Financial Statements and Supplementary Data      37   

Item 9.

   Changes in and Disagreements With Accountants on Accounting and Financial Disclosure      82   

Item 9A.

   Controls and Procedures      82   

Item 9B.

   Other Information      82   
PART III   

Item 10.

   Directors, Executive Officers and Corporate Governance      82   

Item 11.

   Executive Compensation      83   

Item 12.

   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters      83   

Item 13.

   Certain Relationships and Related Transactions, and Director Independence      83   

Item 14.

   Principal Accounting Fees and Services      83   
PART IV   

Item 15.

   Exhibits and Financial Statement Schedules      84   

SIGNATURES

     85   

Index to Exhibits

     86   

 

1


Table of Contents

PART I

 

Item 1. Business

General Development of Business

AMETEK, Inc. (“AMETEK” or the “Company”) is incorporated in Delaware. Its predecessor was originally incorporated in Delaware in 1930 under the name American Machine and Metals, Inc. The Company maintains its principal executive offices in suburban Philadelphia at 1100 Cassatt Road, Berwyn, Pennsylvania, 19312. AMETEK is a leading global manufacturer of electronic instruments and electromechanical devices with operations in North America, Europe, Asia and South America. The Company is listed on the New York Stock Exchange (symbol: AME). The common stock of AMETEK is a component of the S&P MidCap 400 and the Russell 1000 Indices.

Website Access to Information

The Company’s annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to those reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934 are made available free of charge on the Company’s website at www.ametek.com (in the “Investors – Financial News and Information” section), as soon as reasonably practicable after such material is electronically filed with, or furnished to, the Securities and Exchange Commission. The Company has posted, free of charge, on the investor information portion of its website, its corporate governance guidelines, Board committee charters and codes of ethics. Those documents also are available in published form, free of charge, to any stockholder who requests them by writing to the Investor Relations Department at AMETEK, Inc., 1100 Cassatt Road, Berwyn, Pennsylvania, 19312.

Products and Services

The Company markets its products worldwide through two operating groups, the Electronic Instruments Group (“EIG”) and the Electromechanical Group (“EMG”). EIG provides monitoring, testing, calibration and display devices for the process, aerospace, power and industrial markets. EMG produces highly engineered electrical connectors for electronic applications, precision motion control solutions, specialty metals and alloys and electric motors, blowers and heat exchangers. End markets include aerospace and defense, medical devices, office equipment, factory automation, mass transit and other industrial markets. The Company continues to grow through strategic acquisitions focused on differentiated niche markets in instrumentation and electromechanical devices.

Competitive Strengths

Management believes that the Company has several significant competitive advantages that assist it in sustaining and enhancing its market positions. Its principal strengths include:

Significant Market Share.    AMETEK maintains a significant share in many of its targeted niche markets because of its ability to produce and deliver high-quality products at competitive prices. In EIG, the Company maintains significant market positions in many niche segments within the process, aerospace, power and industrial instrumentation markets. In EMG, the Company maintains significant market positions in many niche segments including aerospace and defense, precision motion control, factory automation and robotics, medical devices, mass transit and office equipment products.

Technological and Development Capabilities.    AMETEK believes it has certain technological advantages over its competitors that allow it to develop innovative products and maintain leading market positions. Historically, the Company has grown by extending its technical expertise into the manufacture of customized products for its customers, as well as through strategic acquisitions. EIG competes primarily on

 

2


Table of Contents

the basis of product innovation in several highly specialized instrumentation markets, including process measurement, aerospace, power generation and distribution, heavy-vehicle dashboard and medical instrumentation. EMG’s differentiated businesses focus on developing customized products for specialized applications in aerospace and defense, medical, business machines and other industrial applications.

Efficient and Low-Cost Manufacturing Operations.    EMG has manufacturing plants in Brazil, China, the Czech Republic, Malaysia, Mexico and Serbia to lower its costs and achieve strategic proximity to its customers, providing the opportunity to increase international sales and market share. Certain of the Company’s electronic instrument businesses have relocated manufacturing operations to low-cost locales. Furthermore, strategic acquisitions and joint ventures in Europe, North America and Asia have resulted in additional cost savings and synergies through the consolidation of operations, supply chain, product lines and distribution channels, which benefits both operating groups.

Experienced Management Team.    Another key component of AMETEK’s success is the strength of its management team and its commitment to the performance of the Company. AMETEK’s senior management has extensive experience, averaging approximately 25 years with the Company, and is financially committed to the Company’s success through Company-established stock ownership guidelines and equity incentive programs.

Business Strategy

AMETEK’s objectives are to increase the Company’s earnings and financial returns through a combination of operational and financial strategies. Those operational strategies include Operational Excellence, New Product Development, Global and Market Expansion, and Strategic Acquisitions and Alliances designed to achieve double-digit annual percentage growth in earnings per share over the business cycle and a superior return on total capital. To support those operational objectives, financial initiatives have been, or may be, undertaken, including public and private debt or equity issuance, bank debt refinancing, local financing in certain foreign countries and share repurchases. AMETEK’s commitment to earnings growth is reflected in its continued implementation of cost-reduction programs designed to achieve the Company’s long-term, best-cost objectives.

AMETEK’s Corporate Growth Plan consists of four key strategies:

Operational Excellence.    Operational Excellence is AMETEK’s cornerstone strategy for improving profit margins and strengthening the Company’s competitive position across its businesses. Through its Operational Excellence strategy, the Company seeks to reduce production costs and improve its market positions. The strategy has played a key role in achieving synergies from newly acquired companies. AMETEK believes that Operational Excellence, which focuses on Six Sigma process improvements, global sourcing and lean manufacturing and emphasizes team building and a participative management culture, has enabled the Company to improve operating efficiencies and product quality, increase customer satisfaction and yield higher cash flow from operations, while lowering operating and administrative costs and shortening manufacturing cycle times.

New Product Development.    New products are essential to AMETEK’s long-term growth. As a result, AMETEK has consistently increased its investment in new product development, and, in 2012, added to its highly differentiated product portfolio with a range of new products across each of its businesses. Its most recent product introductions include:

 

   

MINISCAN IRXpert, the first completely portable multi-fuel analyzer for gasoline, diesel and biodiesel fuels that incorporates infrared technology to achieve unmatched accuracy of fuel properties;

 

   

EDAX® TEAM™ Pegasus, which combines two leading materials characterization technologies into a single integrated microanalysis system for scanning electron microscopes;

 

3


Table of Contents
   

Land Instruments Critical Vessel Monitoring System, which uses advanced thermal imaging cameras to monitor critical process vessels used in power generation, petrochemical processing, oil and gas refining and combustion processes;

 

   

PITTMAN® 8540 Series DC servo motors, which offer high performance in a small package for such high-tech applications as medical devices, laboratory instruments, data storage and precision automation machinery;

 

   

Haydon Kerk® micro-slide linear actuator that has a resolution of 15 microns / step (0.00006-in /step) and is ideal for such applications as micro-fluidics and optical positioning that require precise motion control in a small package;

 

   

The latest generation of SPECTROTEST mobile metal analyzers that are lighter weight, easier to use and provide up to four times the system throughput than earlier versions;

 

   

Drexelbrook® Universal IV level measurement transmitter, which features stable, repeatable and accurate level measurement and is ideally suited for the most common to the most challenging level measurement applications;

 

   

Lloyd Instruments® LS5 universal materials testing system that incorporates the latest linear guide technology with an advanced software compensation system to ensure the highest level of precision measurement;

 

   

Vision Research Phantom® v642 high-speed camera, which incorporates Academy Award®- and Emmy Award®-winning high-speed, digital photography technology to record and deliver ultra-slow motion images;

 

   

AMETEK® ultra-thin titanium strip in thicknesses as low as 0.004 inches that offers outstanding performance characteristics for pacemakers and neurostimulator enclosures and other medical implants;

 

   

The Detective-200™ advanced radiation detector, which represents a breakthrough in radiation identification technology by offering ultra-sensitivity and ease of use in a compact, portable detection unit;

 

   

CAMECA IMS 7f Secondary Ion Mass Spectrometer, which delivers precise elemental and isotopic analysis for researchers in advanced material research, including leading-edge semiconductor development;

 

   

Elgar Terra SAS™ standalone solar array simulator that allows solar energy system developers to accurately simulate test protocols and real-world solar installation conditions in the laboratory; and

 

   

The Universal Instrument Panel-Message Center, which was added to the Next Generation Instrument (NGI®) family of road-tested heavy vehicle dashboard displays.

Global and Market Expansion.    AMETEK’s largest presence outside the United States is in Europe, where it has operations in the United Kingdom, Germany, Denmark, Italy, the Czech Republic, Serbia, Romania, France, Austria, Switzerland and the Netherlands. These operations provide design, engineering and manufacturing capability, product-line breadth, enhanced European distribution channels and low-cost production. AMETEK has grown sales in Latin America and Asia by building and expanding low-cost electric motor and instrument plants in Reynosa, Mexico, Sao Paulo, Brazil and Shanghai, China. It also continues to achieve geographic and market expansion in Asia through an increased sales and marketing presence in China, India, Japan, Korea, Malaysia, Middle East, Russia, Singapore and Taiwan as well as joint ventures in China, Japan and Taiwan.

 

4


Table of Contents

Strategic Acquisitions and Alliances.    The Company continues to pursue strategic acquisitions, both domestically and internationally, to expand and strengthen its product lines, improve its market share positions and increase earnings through sales growth, and operational efficiencies at the acquired businesses. Since the beginning of 2008, through December 31, 2012, the Company has completed 27 acquisitions with annualized sales totaling approximately $1.2 billion, including seven acquisitions in 2012 (see “Recent Acquisitions”). Through these and prior acquisitions, the Company’s management team has gained considerable experience in successfully acquiring and integrating new businesses. The Company intends to continue to pursue this acquisition strategy.

2012 OVERVIEW

Operating Performance

In 2012, AMETEK achieved sales of $3.3 billion, an increase of 11.5% from 2011 and established records for orders, backlog, net sales, operating income, operating income margins, net income, diluted earnings per share and operating cash flow.

On May 1, 2012, the Company’s Board of Directors declared a three-for-two split of the Company’s common stock. The stock split resulted in the issuance of one additional share for every two shares owned. The stock split was paid on June 29, 2012, to stockholders of record at the close of business on June 15, 2012. Additionally, the Board of Directors approved a 50% increase in the quarterly cash dividend rate on the Company’s common stock to $0.06 per common share from $0.04 per common share on a post-split basis. All share and per share information included in this report reflects the impact of the stock split. See Note 2 to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.

Recent Acquisitions

The Company spent $747.7 million in cash, net of cash acquired, for seven business acquisitions in 2012.

In January 2012, the Company acquired O’Brien Corporation, a leading manufacturer of fluid and gas handling solutions, sample conditioning equipment and process analyzers. O’Brien is part of EIG.

In May 2012, the Company acquired Dunkermotoren GmbH, a leader in advanced motion control solutions for a wide range of industrial automation applications. Dunkermotoren is part of EMG.

In October 2012, the Company acquired Micro-Poise Measurement Systems (“Micro-Poise”), a leading provider of integrated test and measurement solutions for the tire industry. Micro-Poise is part of EIG.

In December 2012, the Company acquired Aero Components International (“ACI”), which expands the Company’s global maintenance, repair and overhaul (“MRO”) capabilities into fuel system repair. ACI is part of EMG.

In December 2012, the Company acquired Avtech Avionics and Instruments (“Avtech”), which broadens the Company’s MRO expertise in next generation avionics. Avtech is part of EMG.

In December 2012, the Company acquired Sunpower, Inc., a leader in the development of Stirling cycle cryocoolers and externally heated Stirling engine technology for medical, scientific, telecommunication and space applications. Sunpower is part of EIG.

In December 2012, the Company acquired Crystal Engineering, a manufacturer of high-end, portable pressure calibrators and digital test gauges for the oil and gas, power generation and other industrial markets. Crystal Engineering is part of EIG.

 

5


Table of Contents

Financial Information About Reportable Segments, Foreign Operations and Export Sales

Information with respect to reportable segments and geographic areas is set forth in Note 16 to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.

The Company’s international sales increased 14% to $1,707.6 million in 2012. The increase in international sales resulted from the acquisitions mentioned above, continued expansion into Asia, and includes the effect of foreign currency translation. The Company experienced increases in export sales of products manufactured in the United States, as well as increased sales from overseas operations. International sales represented 51.2% of consolidated net sales in 2012 compared with 50.2% in 2011.

Description of Business

The products and markets of each reportable segment are described below:

EIG

EIG applies its specialized market focus and technology to the manufacture of instruments used for testing, monitoring, calibration and display by the process, aerospace, power and industrial markets. EIG’s growth is based on the four strategies outlined in AMETEK’s Corporate Growth Plan. EIG designs products that, in many instances, are significantly different from, or technologically better than, competing products. It has reduced costs by implementing operational improvements, achieving acquisition synergies, improving supply chain management practices, moving production to low-cost locales and reducing headcount. EIG is among the leaders in many of the specialized markets it serves, including airframe and aircraft engine sensors; process and analytical instruments; electric power generation, distribution and transmission instruments; and heavy-vehicle instrument panels. It has joint venture operations in China, Japan and Taiwan. 55% of EIG’s 2012 net sales were to customers outside the United States.

At December 31, 2012, EIG employed approximately 6,700 people, of whom approximately 1,100 were covered by collective bargaining agreements. EIG had 60 operating facilities: 40 in the United States, six each in the United Kingdom and Germany, two in France, and one each in Argentina, Austria, Canada, China, Denmark and Switzerland at December 31, 2012. EIG also shares operating facilities with EMG in Brazil, China and Mexico.

Process and Analytical Instrumentation Markets and Products

Process and analytical instrumentation sales represented 68% of EIG’s 2012 net sales. These include: process analyzers; emission monitors; spectrometers, elemental and surface analysis instruments; level, pressure and temperature sensors and transmitters; radiation measurement devices; level measurement devices; precision pumping systems; force-materials and force-testing instruments; and radiation measurement devices. EIG’s focus is on the process industries, including oil, gas and petrochemical refining, power generation, pharmaceutical manufacture, specialty gas production, water and waste treatment, natural gas distribution and semiconductor manufacturing. AMETEK’s analytical instruments also are used for precision measurement in a number of other applications, including radiation detection, trace element and materials analysis, nanotechnology research, ultra precision manufacturing and test and measurement applications.

Crystal Engineering, acquired in December 2012, has high-end pressure measurement technology and manufactures high-end portable digital pressure calibrators and digital test gauges that fit well with AMETEK’s JOFRA® temperature and pressure calibrators. Crystal Engineering strengthens the Company’s technology and product offering in the calibration instruments market.

Sunpower, acquired in December 2012, designs and develops high reliability cryocoolers and externally heated Stirling cycle engines. Sunpower’s cryogenic cooling technology provides a critical enabling technology for use in the Company’s ORTEC Detective® family of portable radiation identifiers.

 

6


Table of Contents

Micro-Poise, acquired in October 2012, has a large installed equipment base at many of the world’s leading tire manufacturers and is the only industry supplier of all key test and measurement techniques with products that offer best-in-class accuracy, repeatability and cycle times. Micro-Poise broadens the Company’s position in the materials test and measurement equipment market and makes AMETEK a leader in this growing industry segment.

O’Brien, acquired in January 2012, has products and solutions which are used in critical applications in process industries worldwide. O’Brien’s product lines are both highly differentiated and highly complementary to AMETEK’s process instruments businesses. Combined with the Company’s analytical instrument solutions, AMETEK now can offer its customers a complete solution for most of their process analysis needs.

Technical Manufacturing Corporation (“TMC”), acquired in December 2011, serves the leading manufacturers of life sciences, photonics and semiconductor equipment with a broad range of custom active piezoelectric vibration cancellation systems, based on their patented active piezo technology. TMC also supplies passive vibration cancellation systems, optical test tables, acoustic isolation hoods and magnetic isolation hoods. TMC is an excellent fit with the Company’s high-end analytical instruments businesses and further broadens AMETEK’s product offerings and expertise in ultra precision manufacturing.

Reichert Technologies, acquired in October 2011, is a leader and innovator in high-technology instruments used by ophthalmologists, optometrists, and opticians for vision correction and the screening and diagnosis of eye diseases such as glaucoma and macular degeneration. Reichert Technologies expands AMETEK’s business in the medical market.

Power and Industrial Instrumentation Markets and Products

Power and industrial instrumentation sales represented 23% of EIG’s 2012 net sales. AMETEK’s power businesses provide analytical instruments, uninterruptible power supply systems and programmable power supplies used in a wide variety of industrial settings. EIG is a leader in the design and manufacture of power measurement and recording instrumentation used by the electric power and manufacturing industries. Those products include power transducers and meters, event and transient recorders, annunciators and alarm monitoring systems used to measure, monitor and record variables in the transmission and distribution of electric power.

EIG designs and manufactures uninterruptible power supply systems for the process and power generation industries. EIG also manufactures sensor systems for land-based gas turbines and for boilers and burners used by the utility, petrochemical, process and marine industries worldwide.

EIG is a leader in programmable AC and DC power sources with growth opportunities in the highly attractive electronic test and measurement equipment market.

EM Test, acquired in October 2011, is a global leader in equipment used to perform electrical immunity and electromagnetic compatibility testing. EM Test manufactures a full line of conducted electromagnetic compatibility test equipment, including electrical fast transient generators, electrostatic discharge simulators, surge generators, waveform simulators and multifunctional generators. Its products are used in test applications by a wide range of industries to ensure that electronic and electrical products are not susceptible to external electromagnetic disturbances and do not generate electromagnetic disturbances that might affect other products or instruments.

Aerospace Instrumentation Markets and Products

Aerospace instrumentation sales represented 9% of EIG’s 2012 net sales. AMETEK’s aerospace products are designed to customer specifications and are manufactured to stringent operational and reliability requirements. Its aerospace business operates in specialized markets, where its products have a technological and/or cost advantage. Acquisitions have complemented and expanded EIG’s core sensor and transducer product line, used in a wide range of aerospace applications.

 

7


Table of Contents

Aerospace products include: airborne data systems; turbine engine temperature measurement products; vibration-monitoring systems; indicators; displays; fuel and fluid measurement products; sensors; switches; cable harnesses; and transducers. EIG serves all segments of commercial aerospace, including helicopters, business jets, commuter aircraft and commercial airliners, as well as the military market.

Among its more significant competitive advantages are EIG’s 50-plus years of experience as an aerospace supplier and its long-standing customer relationships with global commercial aircraft Original Equipment Manufacturers (“OEMs”). Its customers are the leading producers of airframes and jet engines and other aerospace system integrators. It also serves the commercial aerospace aftermarket with spare part sales and repair and overhaul services.

Customers

EIG is not dependent on any single customer such that the loss of that customer would have a material adverse effect on EIG’s operations. Approximately 8% of EIG’s 2012 net sales were made to its five largest customers.

EMG

EMG is among the leaders in many of the specialized markets it serves, including highly engineered electrical connectors and electronics packaging used to protect sensitive electronic devices in aerospace, defense, medical and industrial applications, and advanced technical motor and motion control products used in electronic data storage, medical devices, office and business equipment, factory automation and robotics and other applications. EMG provides high-purity powdered metals, strip and foil, specialty clad metals and metal matrix composites. EMG blowers and heat exchangers provide electronic cooling and environmental control for the aerospace and defense industries. Its motors are widely used in commercial appliances, fitness equipment, food and beverage machines, hydraulic pumps, industrial blowers and vacuum cleaners. It also operates a global network of aviation MRO facilities. EMG designs products that, in many instances, are significantly different from, or technologically better than, competing products. It has reduced costs by implementing operational improvements, achieving acquisition synergies, improving supply chain management, moving production to low-cost locales and reducing headcount. 47% of EMG’s 2012 net sales were to customers outside the United States.

At December 31, 2012, EMG employed approximately 6,800 people, of whom approximately 1,600 were covered by collective bargaining agreements (including some that are covered by local unions). EMG had 65 operating facilities: 37 in the United States, ten in the United Kingdom, three each in China and France, two each in the Czech Republic, Germany, Italy and Mexico and one each in Brazil, Malaysia, Serbia and Taiwan at December 31, 2012.

Differentiated Businesses

Differentiated businesses account for an increasing proportion of EMG’s overall sales base. Differentiated businesses sales represented 85% of EMG’s net sales in 2012 and are comprised of the technical motors and systems sales and the engineered materials, interconnects and packaging sales.

Technical Motors and Systems Markets and Products

Technical motors and systems sales represented 50% of EMG’s 2012 net sales. Technical motors and systems consists of brushless motors, blowers and pumps, heat exchangers, as well as other electromechanical systems. These products are used in aerospace and defense, business machines, computer equipment, mass transit vehicles, medical equipment, power, and industrial applications.

EMG also produces motor-blower systems and heat exchangers used for thermal management and other applications on a wide variety of military and commercial aircraft and military ground vehicles.

 

8


Table of Contents

EMG also serves the commercial and military aerospace third-party MRO market. These services are provided on a global basis with facilities in the United States, Europe and Singapore.

ACI, acquired in December 2012, repairs and overhauls fuel, hydraulic, pneumatic, power generation and heat exchanger components and is one of the few independent aviation repair shops with fuel system repair capabilities. Avtech, acquired in December 2012, is in the repair and maintenance of next generation and legacy avionics and instruments. The acquisitions of ACI and Avtech represent a further expansion of AMETEK’s global aerospace MRO capabilities.

Dunkermotoren, acquired in May 2012, is a global leader in highly engineered advanced motion control solutions for niche applications. Dunkermotoren expands the Company’s leadership position in niche rotary and linear motion applications.

Engineered Materials, Interconnects and Packaging Markets and Products

Engineered materials, interconnects and packaging sales represented 35% of EMG’s 2012 net sales. AMETEK is a leader in highly engineered electrical connectors and electronics packaging used to protect sensitive devices and mission-critical electronics. Its electrical connectors, terminals and headers are specifically designed for harsh environments and highly customized applications. AMETEK also is an innovator and market leader in specialized metal powder, strip, wire and bonded products used in automotive, appliance, medical and surgical, aerospace, telecommunications, marine and general industrial applications.

Coining Holding Company (“Coining”), acquired in May 2011, is a global leader in custom-shaped preforms, microstampings and wire used for joining electronic circuitry, packaging microelectronics and providing thermal protection and electric conductivity for a wide range of electronic devices. Coining’s products are used in highly engineered applications.

Avicenna Technology, Inc. (“Avicenna”), acquired in April 2011, provides the Company with additional expertise in producing fine-featured catheter and other medical components for leads, guide wires and custom medical assemblies. Avicenna complements the Company’s medical device market businesses and is an excellent fit with its Technical Services for Electronics (“TSE”) business. The combination of Avicenna and TSE, acquired in June 2010, positions AMETEK as the only medical interconnects provider with integrated capabilities for the catheter, cardiac and neurostimulation markets.

Floorcare and Specialty Motor Markets and Products

Floorcare and specialty motor sales represented 15% of EMG’s 2012 net sales. Its specialty motors and motor-blowers are used in a wide range of products, such as floorcare products, ranging from hand-held, canister and upright vacuums to central vacuums for residential use; household and personal care appliances; fitness equipment; electric materials handling vehicles; and sewing machines. Additionally, its products are used in outdoor power equipment, such as electric chain saws, leaf blowers, string trimmers and power washers.

Customers

EMG is not dependent on any single customer such that the loss of that customer would have a material adverse effect on EMG’s operations. Approximately 9% of EMG’s 2012 net sales were made to its five largest customers.

Marketing

The Company’s marketing efforts generally are organized and carried out at the division level. EIG makes use of distributors and sales representatives in marketing its products, as well as direct sales in most of its more technically sophisticated products. Within aerospace, its specialized customer base of aircraft and jet engine manufacturers is served primarily by direct sales engineers. Given the technical nature of many of its products, as

 

9


Table of Contents

well as its significant worldwide market share, EMG conducts much of its domestic and international marketing activities through a direct sales force and makes some use of sales representatives and distributors both in the United States and in other countries.

Competition

In general, most of the Company’s markets are highly competitive. The principal elements of competition for the Company’s products are product technology, distribution, quality, service and price.

In the markets served by EIG, the Company believes that it ranks among the leading producers of certain measuring and control instruments. It also is a leader in the U.S. heavy-vehicle instrumentation and power instrument markets and one of the leading instrument and sensor suppliers to the commercial aviation market. Competition remains strong and can intensify for certain EIG products. Both of these businesses have several strong competitors. In the process and analytical instruments market, numerous companies in each specialized market compete on the basis of product quality, performance and innovation. The aerospace and power instrument businesses have a number of diversified competitors, which vary depending on the specific market niche.

EMG’s differentiated businesses have competition from a limited number of companies in each of their markets. Competition is generally based on product innovation, performance and price. There also is competition from alternative materials and processes. In its floorcare and specialty motor businesses, EMG has limited domestic competition in the U.S. while competition is strong from Asian motor manufacturers that serve both the U.S. and the European floorcare and specialty motor markets where AMETEK has a smaller market position. There is potential competition from vertically integrated manufacturers of floorcare products that produce their own motor-blowers. Many of these manufacturers would also be potential EMG customers if they decided to outsource their motor production.

Availability of Raw Materials

The Company’s reportable segments obtain raw materials and supplies from a variety of sources and generally from more than one supplier. However, for EMG, certain items, including various base metals and certain steel components, are available only from a limited number of suppliers. The Company believes its sources and supplies of raw materials are adequate for its needs.

Backlog and Seasonal Variations of Business

The Company’s backlog of unfilled orders by reportable segment was as follows at December 31:

 

     2012      2011      2010  
     (In millions)  

Electronic Instruments

   $ 526.5       $ 437.5       $ 370.2   

Electromechanical

     585.8         473.9         458.6   
  

 

 

    

 

 

    

 

 

 

Total

   $ 1,112.3       $ 911.4       $ 828.8   
  

 

 

    

 

 

    

 

 

 

The higher backlog at December 31, 2012 was due to higher order levels and the acquired backlog of 2012 acquisitions.

Of the total backlog of unfilled orders at December 31, 2012, approximately 87% is expected to be shipped by December 31, 2013. The Company believes that neither its business as a whole, nor either of its reportable segments, is subject to significant seasonal variations, although certain individual operations experience some seasonal variability.

 

10


Table of Contents

Research, Development and Engineering

The Company is committed to research, development and engineering activities that are designed to identify and develop potential new and improved products or enhance existing products. Research, development and engineering costs before customer reimbursement were $154.8 million, $137.6 million and $112.1 million in 2012, 2011 and 2010, respectively. Customer reimbursements in 2012, 2011 and 2010 were $5.0 million, $6.1 million and $6.4 million, respectively. These amounts included net Company-funded research and development expenses of $84.9 million, $78.0 million and $56.8 million in 2012, 2011 and 2010, respectively. All such expenditures were directed toward the development of new products and processes and the improvement of existing products and processes.

Environmental Matters

Information with respect to environmental matters is set forth in the section of Management’s Discussion and Analysis of Financial Condition and Results of Operations entitled “Environmental Matters” and in Note 14 to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.

Patents, Licenses and Trademarks

The Company owns numerous unexpired U.S. patents and foreign patents, including counterparts of its more important U.S. patents, in the major industrial countries of the world. The Company is a licensor or licensee under patent agreements of various types and its products are marketed under various registered and unregistered U.S. and foreign trademarks and trade names. However, the Company does not consider any single patent or trademark, or any group thereof, essential either to its business as a whole or to either of its reportable segments. The annual royalties received or paid under license agreements are not significant to either of its reportable segments or to the Company’s overall operations.

Employees

At December 31, 2012, the Company employed approximately 13,700 people in its EMG, EIG and corporate operations, of whom approximately 2,700 employees were covered by collective bargaining agreements. The Company has two collective bargaining agreements that will expire in 2013, which cover less than 200 employees. The Company expects no material adverse effects from the pending labor contract negotiations.

Working Capital Practices

The Company does not have extraordinary working capital requirements in either of its reportable segments. Customers generally are billed at normal trade terms, which may include extended payment provisions. Inventories are closely controlled and maintained at levels related to production cycles and are responsive to the normal delivery requirements of customers.

 

Item 1A. Risk Factors

You should consider carefully the following risk factors and all other information contained in this Annual Report on Form 10-K and the documents we incorporate by reference in this Annual Report on Form 10-K. Any of the following risks could materially and adversely affect our business, financial condition, results of operations and cash flows.

A prolonged downturn in the aerospace and defense, process instrumentation or power markets could adversely affect our business.

Several of the industries in which we operate are cyclical in nature and therefore are affected by factors beyond our control. A prolonged downturn in the aerospace and defense, process instrumentation or power markets could have an adverse effect on our business, financial condition and results of operations.

 

11


Table of Contents

Our growth strategy includes strategic acquisitions. We may not be able to consummate future acquisitions or successfully integrate recent and future acquisitions.

A portion of our growth has been attributed to acquisitions of strategic businesses. Since the beginning of 2008, through December 31, 2012, we have completed 27 acquisitions. We plan to continue making strategic acquisitions to enhance our global market position and broaden our product offerings. Although we have been successful with our acquisition strategies in the past, our ability to successfully effectuate acquisitions will be dependent upon a number of factors, including:

 

   

Our ability to identify acceptable acquisition candidates;

 

   

The impact of increased competition for acquisitions, which may increase acquisition costs and affect our ability to consummate acquisitions on favorable terms and may result in us assuming a greater portion of the seller’s liabilities;

 

   

Successfully integrating acquired businesses, including integrating the financial, technological and management processes, procedures and controls of the acquired businesses with those of our existing operations;

 

   

Adequate financing for acquisitions being available on terms acceptable to us;

 

   

U.S. and foreign competition laws and regulations affecting our ability to make certain acquisitions;

 

   

Unexpected losses of key employees, customers and suppliers of acquired businesses;

 

   

Mitigating assumed, contingent and unknown liabilities; and

 

   

Challenges in managing the increased scope, geographic diversity and complexity of our operations.

The process of integrating acquired businesses into our existing operations may result in unforeseen operating difficulties and may require additional financial resources and attention from management that would otherwise be available for the ongoing development or expansion of our existing operations. Furthermore, even if successfully integrated, the acquired business may not achieve the results we expected or produce expected benefits in the time frame planned. Failure to continue with our acquisition strategy and the successful integration of acquired businesses could have a material adverse effect on our business, financial condition, results of operations and cash flows.

We may experience unanticipated start-up expenses and production delays in opening new facilities or product line transfers.

Certain of our businesses are relocating or have recently relocated manufacturing operations to low-cost locales. Unanticipated start-up expenses and production delays in opening new facilities or completing product line transfers, as well as possible underutilization of our existing facilities, could result in production inefficiencies, which would adversely affect our business and operations.

Our substantial international sales and operations are subject to customary risks associated with international operations.

International sales for 2012 and 2011 represented 51.2% and 50.2% of our consolidated net sales, respectively. As a result of our growth strategy, we anticipate that the percentage of sales outside the United States will increase in the future. Approximately half of our international sales are of products manufactured outside the United States. We have manufacturing operations in 16 countries outside the United States, with significant operations in China, the Czech Republic and Mexico. A prolonged disruption of our ability to obtain a supply of goods from these countries could have a material adverse effect on our operations. International operations are subject to the customary risks of operating in an international environment, including:

 

12


Table of Contents
   

Potential imposition of trade or foreign exchange restrictions;

 

   

Overlap of different tax structures;

 

   

Unexpected changes in regulatory requirements;

 

   

Changes in tariffs and trade barriers;

 

   

Fluctuations in foreign currency exchange rates, including changes in the relative value of currencies in the countries where we operate, subjecting us to exchange rate exposures;

 

   

Restrictions on currency repatriation;

 

   

General economic conditions;

 

   

Unstable political situations;

 

   

Nationalization of assets; and

 

   

Compliance with a wide variety of international and U.S. laws and regulatory requirements.

Our international sales and operations may be adversely impacted by compliance with export laws.

We are required to comply with various import, export, export control and economic sanctions laws, which may affect our transactions with certain customers, business partners and other persons, including in certain cases dealings with or between our employees and subsidiaries. In certain circumstances, export control and economic sanctions regulations may prohibit the export of certain products, services and technologies and in other circumstances, we may be required to obtain an export license before exporting a controlled item. In addition, failure to comply with any of these regulations could result in civil and criminal, monetary and non-monetary penalties, disruptions to our business, limitations on our ability to import and export products and services and damage to our reputation.

Any inability to hire, train and retain a sufficient number of skilled officers and other employees could impede our ability to compete successfully.

If we cannot hire, train and retain a sufficient number of qualified employees, we may not be able to effectively integrate acquired businesses and realize anticipated results from those businesses, manage our expanding international operations and otherwise profitably grow our business. Even if we do hire and retain a sufficient number of employees, the expense necessary to attract and motivate these officers and employees may adversely affect our results of operations.

If we are unable to develop new products on a timely basis, it could adversely affect our business and prospects.

We believe that our future success depends, in part, on our ability to develop, on a timely basis, technologically advanced products that meet or exceed appropriate industry standards. Although we believe we have certain technological and other advantages over our competitors, maintaining such advantages will require us to continue investing in research and development and sales and marketing. There can be no assurance that we will have sufficient resources to make such investments, that we will be able to make the technological advances necessary to maintain such competitive advantages or that we can recover major research and development expenses. We are not currently aware of any emerging standards or new products which could render our existing products obsolete, although there can be no assurance that this will not occur or that we will be able to develop and successfully market new products.

 

13


Table of Contents

A shortage of, or price increases for, our raw materials could increase our operating costs.

We have multiple sources of supply for our major raw material requirements and we are not dependent on any one supplier; however, certain items, including base metals and certain steel components, are available only from a limited number of suppliers and are subject to commodity market fluctuations. Shortages in raw materials or price increases therefore could affect the prices we charge, our operating costs and our competitive position, which could adversely affect our business, financial condition, results of operations and cash flows.

Certain environmental risks may cause us to be liable for costs associated with hazardous or toxic substance clean-up which may adversely affect our financial condition.

Our businesses, operations and facilities are subject to a number of federal, state, local and foreign environmental and occupational health and safety laws and regulations concerning, among other things, air emissions, discharges to waters and the use, manufacturing, generation, handling, storage, transportation and disposal of hazardous substances and wastes. Environmental risks are inherent in many of our manufacturing operations. Certain laws provide that a current or previous owner or operator of property may be liable for the costs of investigating, removing and remediating hazardous materials at such property, regardless of whether the owner or operator knew of, or was responsible for, the presence of such hazardous materials. In addition, the Comprehensive Environmental Response, Compensation and Liability Act generally imposes joint and several liability for clean-up costs, without regard to fault, on parties contributing hazardous substances to sites designated for clean-up under the Act. We have been named a potentially responsible party at several sites, which are the subject of government-mandated clean-ups. As the result of our ownership and operation of facilities that use, manufacture, store, handle and dispose of various hazardous materials, we may incur substantial costs for investigation, removal, remediation and capital expenditures related to compliance with environmental laws. While it is not possible to precisely quantify the potential financial impact of pending environmental matters, based on our experience to date, we believe that the outcome of these matters is not likely to have a material adverse effect on our financial position or future results of operations. In addition, new laws and regulations, new classification of hazardous materials, stricter enforcement of existing laws and regulations, the discovery of previously unknown contamination or the imposition of new clean-up requirements could require us to incur costs or become the basis for new or increased liabilities that could have a material adverse effect on our business, financial condition and results of operations. There can be no assurance that future environmental liabilities will not occur or that environmental damages due to prior or present practices will not result in future liabilities.

We are subject to numerous governmental regulations, which may be burdensome or lead to significant costs.

Our operations are subject to numerous federal, state, local and foreign governmental laws and regulations. In addition, existing laws and regulations may be revised or reinterpreted and new laws and regulations, including with respect to climate change, may be adopted or become applicable to us or customers for our products. We cannot predict the form any such new laws or regulations will take or the impact any of these laws and regulations will have on our business or operations.

We may be required to defend lawsuits or pay damages in connection with alleged or actual harm caused by our products.

We face an inherent business risk of exposure to product liability claims in the event that the use of our products is alleged to have resulted in harm to others or to property. For example, our operations expose us to potential liabilities for personal injury or death as a result of the failure of, for instance, an aircraft component

that has been designed, manufactured or serviced by us. We may incur a significant liability if product liability lawsuits against us are successful. While we believe our current general liability and product liability insurance is adequate to protect us from future claims, we cannot assure that coverage will be adequate to cover all claims

 

14


Table of Contents

that may arise. Additionally, we may not be able to maintain insurance coverage in the future at an acceptable cost. Any liability not covered by insurance or for which third-party indemnification is not available could have a material adverse effect on our business, financial condition and results of operations.

We operate in highly competitive industries, which may adversely affect our results of operations or ability to expand our business.

Our markets are highly competitive. We compete, domestically and internationally, with individual producers, as well as with vertically integrated manufacturers, some of which have resources greater than we do. The principal elements of competition for our products are product technology, quality, service, distribution and price. EMG’s competition in specialty metal products stems from alternative materials and processes. In the markets served by EIG, although we believe EIG is a market leader, competition is strong and could intensify. In the aerospace and heavy-vehicle markets served by EIG, a limited number of companies compete on the basis of product quality, performance and innovation. Our competitors may develop new or improve existing products that are superior to our products or may adapt more readily to new technologies or changing requirements of our customers. There can be no assurance that our business will not be adversely affected by increased competition in the markets in which it operates or that our products will be able to compete successfully with those of our competitors.

Restrictions contained in our revolving credit facility and other debt agreements may limit our ability to incur additional indebtedness.

Our existing revolving credit facility and other debt agreements contain restrictive covenants, including restrictions on our ability to incur indebtedness. These restrictions could limit our ability to effectuate future acquisitions or restrict our financial flexibility.

We are subject to possible insolvency of financial counterparties.

We engage in numerous financial transactions and contracts including insurance policies, letters of credit, credit facilities, financial derivatives and investment management agreements involving various counterparties. We are subject to the risk that one or more of these counterparties may become insolvent and, therefore, be unable to discharge its obligations under such contracts.

Our goodwill and other intangible assets represent a substantial amount of our total assets and the impairment of such substantial goodwill and intangible assets could have a negative impact on our financial condition and results of operations.

Our total assets include substantial amounts of intangible assets, primarily goodwill. At December 31, 2012, goodwill and other intangible assets, net of accumulated amortization, totaled $3,518.0 million or 68% of our total assets. The goodwill results from our acquisitions, representing the excess of cost over the fair value of the net tangible and other identifiable intangible assets we have acquired. At a minimum, we assess annually whether there has been impairment in the value of our intangible assets. If future operating performance at one or more of our business units were to fall significantly below current levels, we could record, under current applicable accounting rules, a non-cash charge to operating income for goodwill or other intangible asset impairment. Any determination requiring the impairment of a significant portion of goodwill or other intangible assets would negatively affect our financial condition and results of operations.

 

Item 1B. Unresolved Staff Comments

None.

 

15


Table of Contents
Item 2. Properties

At December 31, 2012, the Company had 125 operating facilities in 24 states and 16 foreign countries. Of these facilities, 56 are owned by the Company and 69 are leased. The properties owned by the Company consist of approximately 606 acres, of which approximately 4.6 million square feet are under roof. Under lease is a total of approximately 2.6 million square feet. The leases expire over a range of years from 2012 to 2082, with renewal options for varying terms contained in many of the leases. Production facilities in China, Japan and Taiwan provide the Company with additional production capacity through the Company’s investment in 50% or less owned joint ventures. The Company’s executive offices in Berwyn, Pennsylvania, occupy approximately 43,000 square feet under a lease that expires in September 2023.

The Company’s machinery and equipment, plants and offices are in satisfactory operating condition and are adequate for the uses to which they are put. The operating facilities of the Company by reportable segment were as follows at December 31, 2012:

 

     Number of
Operating
Facilities
     Square Feet Under Roof  
     Owned      Leased      Owned      Leased  

Electronic Instruments

     26         34         1,932,000         1,539,000   

Electromechanical

     30         35         2,645,000         1,035,000   
  

 

 

    

 

 

    

 

 

    

 

 

 

Total

     56         69         4,577,000         2,574,000   
  

 

 

    

 

 

    

 

 

    

 

 

 

 

Item 3. Legal Proceedings

Please refer to “Environmental Matters” in Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note 14 to the Consolidated Financial Statements in this Annual Report on Form 10-K for information regarding certain litigation matters.

In addition to those litigation matters described above, the Company is, from time to time, subject to a variety of litigation and similar proceedings incidental to its business. These lawsuits may involve claims for damages arising out of the use of the Company’s products and services, personal injury, employment matters, tax matters, commercial disputes and intellectual property matters. The Company may also become subject to lawsuits as a result of past or future acquisitions. Based upon the Company’s experience, the Company does not believe that these proceedings and claims will have a material adverse effect on its results of operations, financial position or cash flows.

 

16


Table of Contents

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

The principal market on which the Company’s common stock is traded is the New York Stock Exchange and it is traded under the symbol “AME.” On January 31, 2013, there were approximately 2,200 holders of record of the Company’s common stock.

Market price and dividend information with respect to the Company’s common stock is set forth below. Future dividend payments by the Company will be dependent on future earnings, financial requirements, contractual provisions of debt agreements and other relevant factors.

Under its share repurchase program, the Company repurchased 141,000 shares of common stock for $4.6 million in 2012 and 2.5 million shares of common stock for $59.3 million in 2011 primarily to offset the dilutive effect of shares granted as equity-based compensation.

The high and low sales prices of the Company’s common stock on the New York Stock Exchange composite tape and the quarterly dividends per share paid on the common stock were:

 

     First
Quarter
     Second
Quarter
     Third
Quarter
     Fourth
Quarter
 

2012

                           

Dividends paid per share

   $ 0.04       $ 0.06       $ 0.06       $ 0.06   

Common stock trading range:

           

High

   $ 33.14       $ 35.21       $ 36.56       $ 38.21   

Low

   $ 27.93       $ 31.19       $ 29.86       $ 32.67   

2011

                           

Dividends paid per share

   $ 0.04       $ 0.04       $ 0.04       $ 0.04   

Common stock trading range:

           

High

   $ 29.89       $ 31.33       $ 31.06       $ 29.15   

Low

   $ 25.59       $ 26.92       $ 21.78       $ 20.58   

 

17


Table of Contents

Issuer Purchases of Equity Securities

The following table reflects purchases of AMETEK, Inc. common stock by the Company during the three months ended December 31, 2012:

 

Period

 

Total Number

of Shares

Purchased(1)(2)

     Average Price
Paid per Share
     Total Number of
Shares Purchased as
Part of Publicly
Announced  Plan(2)
     Approximate
Dollar Value of
Shares that
May Yet Be
Purchased  Under
the Plan
 

October 1, 2012 to October 31, 2012

          $               $ 101,627,668   

November 1, 2012 to November 30, 2012

    20,281         36.65         20,281         100,884,369   

December 1, 2012 to December 31, 2012

                            100,884,369   
 

 

 

       

 

 

    

Total

    20,281         36.65         20,281      
 

 

 

    

 

 

    

 

 

    

 

 

(1)

Represents shares surrendered to the Company to satisfy tax withholding obligations in connection with the vesting of restricted stock issued to employees.

(2)

Consists of the number of shares purchased pursuant to the Company’s Board of Directors remaining portion of the $75 million authorization for the repurchase of its common stock announced in January 2010 and $100 million authorization for the repurchase of its common stock announced in November 2011. Such purchases may be affected from time to time in the open market or in private transactions, subject to market conditions and at management’s discretion.

Securities Authorized for Issuance Under Equity Compensation Plan Information

The following table sets forth information as of December 31, 2012 regarding all of the Company’s existing compensation plans pursuant to which equity securities are authorized for issuance to employees and nonemployee directors:

 

Plan category

   Number of securities
to  be issued
upon exercise of
outstanding options,
warrants
and rights
(a)
     Weighted average
exercise  price of
outstanding  options,
warrants
and  rights
(b)
     Number of  securities
remaining available
for future issuance
under equity
compensation plans
(excluding  securities
reflected in column (a))
(c)
 

Equity compensation plans approved by security holders

     6,840,487       $ 22.39         13,240,874   

Equity compensation plans not approved by security holders

     —           —           —     
  

 

 

       

 

 

 

Total

     6,840,487       $ 22.39         13,240,874   
  

 

 

    

 

 

    

 

 

 

 

18


Table of Contents

Stock Performance Graph

The following graph and accompanying table compare the cumulative total stockholder return for AMETEK, Inc. over the last five years ended December 31, 2012 with total returns for the same period for the Dow Jones U.S. Electronic Equipment Index and Russell 1000 Index. The performance graph and table assume a $100 investment made on December 31, 2007 and reinvestment of all dividends. The stock performance shown on the graph below is based on historical data and is not necessarily indicative of future stock price performance.

 

COMPARISON OF FIVE-YEAR CUMULATIVE TOTAL RETURN

 

LOGO

 

     December 31,  
     2007      2008      2009      2010      2011      2012  

AMETEK, Inc.

   $ 100.00       $ 64.87       $ 82.70       $ 128.06       $ 138.17       $ 186.12   

Dow Jones U.S. Electronic Equipment Index*

     100.00         58.71         84.41         113.52         103.43         126.87   

Russell 1000 Index*

     100.00         62.40         80.15         93.05         94.44         109.95   

 

 

*

Includes AMETEK, Inc.

 

19


Table of Contents
Item 6. Selected Financial Data

The following financial information for the five years ended December 31, 2012, has been derived from the Company’s consolidated financial statements. This information should be read in conjunction with Management’s Discussion and Analysis of Financial Condition and Results of Operations and the consolidated financial statements and related notes thereto included elsewhere in this Annual Report on Form 10-K.

 

     2012     2011     2010     2009     2008  
     (In millions, except per share amounts)  

Consolidated Operating Results (Year Ended December 31):

          

Net sales

   $ 3,334.2      $ 2,989.9      $ 2,471.0      $ 2,098.4      $ 2,531.1   

Operating income

   $ 745.9      $ 635.9      $ 482.2      $ 366.1      $ 432.7   

Interest expense

   $ (75.5   $ (69.7   $ (67.5   $ (68.8   $ (63.7

Net income

   $ 459.1      $ 384.5      $ 283.9      $ 205.8      $ 247.0   

Earnings per share:

          

Basic

   $ 1.90      $ 1.60      $ 1.19      $ 0.86      $ 1.03   

Diluted

   $ 1.88      $ 1.58      $ 1.18      $ 0.85      $ 1.02   

Dividends declared and paid per share

   $ 0.22      $ 0.16      $ 0.12      $ 0.11      $ 0.11   

Weighted average common shares outstanding:

          

Basic

     241.5        240.4        238.6        240.3        238.8   

Diluted

     244.0        243.2        241.3        242.7        241.7   

Performance Measures and Other Data:

          

Operating income — Return on net sales

     22.4     21.3     19.5     17.4     17.1

— Return on average total assets

     15.7 %      15.6     13.6     11.6     14.9

Net income — Return on average total capital

     12.6     12.3     10.2     8.2     10.9

— Return on average stockholders’ equity

     20.0 %      20.1     17.0     14.4     19.5

EBITDA(1)

   $ 842.7      $ 712.2      $ 545.9      $ 428.0      $ 489.4   

Ratio of EBITDA to interest expense(1)

     11.2     10.2     8.2     6.3     7.7

Depreciation and amortization

   $ 105.5      $ 86.5      $ 72.9      $ 65.5      $ 63.3   

Capital expenditures

   $ 57.4      $ 50.8      $ 39.2      $ 33.1      $ 44.2   

Cash provided by operating activities

   $ 612.5      $ 508.6      $ 423.0      $ 364.7      $ 247.3   

Free cash flow(2)

   $ 555.1      $ 457.8      $ 383.8      $ 331.6      $ 203.1   

Consolidated Financial Position (At December 31):

          

Current assets

   $ 1,164.7      $ 1,059.1      $ 974.5      $ 969.4      $ 954.6   

Current liabilities

   $ 880.0      $ 628.9      $ 550.9      $ 424.3      $ 447.5   

Property, plant and equipment, net

   $ 383.5      $ 325.3      $ 318.1      $ 310.1      $ 307.9   

Total assets

   $ 5,190.1      $ 4,319.5      $ 3,818.9      $ 3,246.0      $ 3,055.5   

Long-term debt

   $ 1,133.1      $ 1,123.4      $ 1,071.4      $ 955.9      $ 1,093.2   

Total debt

   $ 1,453.8      $ 1,263.9      $ 1,168.5      $ 1,041.7      $ 1,111.7   

Stockholders’ equity

   $ 2,535.2      $ 2,052.8      $ 1,775.2      $ 1,567.0      $ 1,287.8   

Stockholders’ equity per share

   $ 10.42      $ 8.53      $ 7.36      $ 6.46      $ 5.36   

Total debt as a percentage of capitalization

     36.4     38.1     39.7     39.9     46.3

Net debt as a percentage of capitalization(3)

     33.8     34.8     36.2     33.7     44.3

See Notes to Selected Financial Data on the following page.

 

20


Table of Contents

Notes to Selected Financial Data

 

 

(1)

EBITDA represents earnings before interest, income taxes, depreciation and amortization. EBITDA is presented because the Company is aware that it is used by rating agencies, securities analysts, investors and other parties in evaluating the Company. It should not be considered, however, as an alternative to operating income as an indicator of the Company’s operating performance or as an alternative to cash flows as a measure of the Company’s overall liquidity as presented in the Company’s consolidated financial statements. Furthermore, EBITDA measures shown for the Company may not be comparable to similarly titled measures used by other companies. The following table presents the reconciliation of net income reported in accordance with U.S. generally accepted accounting principles (“GAAP”) to EBITDA:

 

     Year Ended December 31,  
     2012     2011     2010     2009     2008  
     (In millions)  

Net income

   $ 459.1      $ 384.5      $ 283.9      $ 205.8      $ 247.0   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Add (deduct):

          

Interest expense

     75.5        69.7        67.5        68.8        63.7   

Interest income

     (0.7     (0.7     (0.7     (1.0     (3.9

Income taxes

     203.3        172.2        122.3        88.9        119.3   

Depreciation

     53.7        48.9        45.4        42.2        45.8   

Amortization

     51.8        37.6        27.5        23.3        17.5   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total adjustments

     383.6        327.7        262.0        222.2        242.4   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

EBITDA

   $ 842.7      $ 712.2      $ 545.9      $ 428.0      $ 489.4   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

(2)

Free cash flow represents cash flow from operating activities less capital expenditures. Free cash flow is presented because the Company is aware that it is used by rating agencies, securities analysts, investors and other parties in evaluating the Company. (Also see note 1 above). The following table presents the reconciliation of cash flow from operating activities reported in accordance with U.S. GAAP to free cash flow:

 

     Year Ended December 31,  
     2012     2011     2010     2009     2008  
     (In millions)  

Cash provided by operating activities

   $ 612.5      $ 508.6      $ 423.0      $ 364.7      $ 247.3   

Deduct: Capital expenditures

     (57.4     (50.8     (39.2     (33.1     (44.2
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Free cash flow

   $ 555.1      $ 457.8      $ 383.8      $ 331.6      $ 203.1   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

(3)

Net debt represents total debt minus cash and cash equivalents. Net debt is presented because the Company is aware that it is used by rating agencies, securities analysts, investors and other parties in evaluating the Company. (Also see note 1 above). The following table presents the reconciliation of total debt reported in accordance with U.S. GAAP to net debt:

 

     December 31,  
     2012     2011     2010     2009     2008  
     (In millions)  

Total debt

   $ 1,453.8      $ 1,263.9      $ 1,168.5      $ 1,041.7      $ 1,111.7   

Less: Cash and cash equivalents

     (158.0     (170.4     (163.2     (246.4     (87.0
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net debt

     1,295.8        1,093.5        1,005.3        795.3        1,024.7   

Stockholders’ equity

     2,535.2        2,052.8        1,775.2        1,567.0        1,287.8   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Capitalization (net debt plus stockholders’ equity)

   $ 3,831.0      $ 3,146.3      $ 2,780.5      $ 2,362.3      $ 2,312.5   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net debt as a percentage of capitalization

     33.8     34.8     36.2     33.7     44.3
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

21


Table of Contents

Item 7.     Management’s Discussion and Analysis of Financial Condition and Results of Operations

This report includes forward-looking statements based on the Company’s current assumptions, expectations and projections about future events. When used in this report, the words “believes,” “anticipates,” “may,” “expect,” “intend,” “estimate,” “project” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain such words. In this report, the Company discloses important factors that could cause actual results to differ materially from management’s expectations. For more information on these and other factors, see “Forward-Looking Information” herein.

The following Management’s Discussion and Analysis of Financial Condition and Results of Operations should be read in conjunction with “Item 1A. Risk Factors,” “Item 6. Selected Financial Data” and the consolidated financial statements and related notes included elsewhere in this Annual Report on Form 10-K.

Business Overview

AMETEK’s operations are affected by global, regional and industry economic factors. However, the Company’s strategic geographic and industry diversification, and its mix of products and services, have helped to limit the potential adverse impact of any unfavorable developments in any one industry or the economy of any single country on its consolidated operating results. In 2012, the Company established records for orders, backlog, sales, operating income, operating income margins, net income, diluted earnings per share and operating cash flow. Contributions from recent acquisitions, combined with successful Operational Excellence initiatives, had a positive impact on 2012 results. The Company also benefited from its strategic initiatives under AMETEK’s four growth strategies: Operational Excellence, New Product Development, Global and Market Expansion, and Strategic Acquisitions and Alliances. Highlights of 2012 were:

 

   

In 2012, net sales were $3.3 billion, an increase of $344.3 million or 11.5% from 2011, on contributions from the 2011 and 2012 acquisitions.

 

   

Net income for 2012 was $459.1 million, an increase of $74.6 million or 19.4%, compared with $384.5 million in 2011.

 

   

During 2012, the Company completed the following acquisitions:

 

   

In January 2012, the Company acquired O’Brien Corporation, a leading manufacturer of fluid and gas handling solutions, sample conditioning equipment and process analyzers.

 

   

In May 2012, the Company acquired Dunkermotoren GmbH, a leader in advanced motion control solutions for a wide range of industrial automation applications.

 

   

In October 2012, the Company acquired Micro-Poise Measurement Systems (“Micro-Poise”), a leading provider of integrated test and measurement solutions for the tire industry.

 

   

In December 2012, the Company acquired Aero Components International (“ACI”), which expands the Company’s global maintenance, repair and overhaul (“MRO”) capabilities into fuel system repair.

 

   

In December 2012, the Company acquired Avtech Avionics and Instruments (“Avtech”), which broadens the Company’s MRO expertise in next generation avionics.

 

   

In December 2012, the Company acquired Sunpower, Inc., a leader in the development of Stirling cycle cryocoolers and externally heated Stirling engine technology for medical, scientific, telecommunication and space applications.

 

   

In December 2012, the Company acquired Crystal Engineering, a manufacturer of high-end, portable pressure calibrators and digital test gauges for the oil and gas, power generation and other industrial markets.

 

22


Table of Contents
   

Higher earnings resulted in record cash flow provided by operating activities that totaled $612.5 million for 2012, a $103.9 million or 20.4% increase from 2011.

 

   

The Company continues to maintain a strong international sales presence. International sales, including U.S. export sales, were $1,707.6 million or 51.2% of net sales in 2012, compared with $1,501.1 million or 50.2% of net sales in 2011.

 

   

New orders for 2012 were a record at $3,535.1 million, an increase of $462.6 million or 15.1%, compared with $3,072.5 million in 2011. As a result, the Company’s backlog of unfilled orders at December 31, 2012 was a record at $1,112.3 million.

 

   

The Company continued its emphasis on investment in research, development and engineering, spending $154.8 million in 2012 before customer reimbursement of $5.0 million. Sales from products introduced in the last three years were $716.2 million or 21.5% of net sales.

 

   

On May 1, 2012, the Company’s Board of Directors declared a three-for-two split of the Company’s common stock. The stock split resulted in the issuance of one additional share for every two shares owned. The stock split was paid on June 29, 2012, to stockholders of record at the close of business on June 15, 2012. Additionally, the Board of Directors approved a 50% increase in the quarterly cash dividend rate on the Company’s common stock to $0.06 per common share from $0.04 per common share on a post-split basis. See Note 2 to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.

Results of Operations

The following table sets forth net sales and income by reportable segment and on a consolidated basis:

 

     Year Ended December 31,  
     2012     2011     2010  
     (In thousands)  

Net sales(1):

      

Electronic Instruments

   $ 1,872,557      $ 1,647,195      $ 1,324,113   

Electromechanical

     1,461,656        1,342,719        1,146,839   
  

 

 

   

 

 

   

 

 

 

Consolidated net sales

   $ 3,334,213      $ 2,989,914      $ 2,470,952   
  

 

 

   

 

 

   

 

 

 

Operating income and income before income taxes:

      

Segment operating income(2):

      

Electronic Instruments

   $ 497,116      $ 420,197      $ 316,184   

Electromechanical

     292,205        262,710        210,397   
  

 

 

   

 

 

   

 

 

 

Total segment operating income

     789,321        682,907        526,581   

Corporate administrative and other expenses

     (43,449     (46,966     (44,423
  

 

 

   

 

 

   

 

 

 

Consolidated operating income

     745,872        635,941        482,158   

Interest and other expenses, net

     (83,397     (79,299     (75,908
  

 

 

   

 

 

   

 

 

 

Consolidated income before income taxes

   $ 662,475      $ 556,642      $ 406,250   
  

 

 

   

 

 

   

 

 

 

 

 

(1)

After elimination of intra- and intersegment sales, which are not significant in amount.

 

(2)

Segment operating income represents net sales less all direct costs and expenses (including certain administrative and other expenses) applicable to each segment, but does not include interest expense.

 

23


Table of Contents

Results of Operations for the year ended December 31, 2012 compared with the year ended December 31, 2011

In 2012, the Company established records for orders, sales, operating income, operating income margins, net income, diluted earnings per share and operating cash flow. The Company achieved these results through contributions from acquisitions completed in 2012 and the acquisitions of Technical Manufacturing Corporation (“TMC”) in December 2011, EM Test (Switzerland) GmbH and Reichert Technologies in October 2011, Coining Holding Company (“Coining”) in May 2011 and Avicenna Technology, Inc. (“Avicenna”) in April 2011, as well as our Operational Excellence initiatives. The full year impact of the 2012 acquisitions and our continued focus on and implementation of Operational Excellence initiatives are expected to have a positive impact on our 2013 results.

Net sales for 2012 were $3,334.2 million, an increase of $344.3 million or 11.5%, compared with net sales of $2,989.9 million in 2011. Net sales for the Electronic Instruments Group (“EIG”) were $1,872.6 million in 2012, an increase of 13.7% from net sales of $1,647.2 million in 2011. Net sales for the Electromechanical Group (“EMG”) were $1,461.7 million in 2012, an increase of 8.9% from net sales of $1,342.7 million in 2011. The increase in net sales was attributable to higher order rates, as well as the impact of the acquisitions mentioned above. The net sales increase for 2012 included internal sales growth of approximately 1%, which excludes a 1% unfavorable effect of foreign currency translation. The acquisitions mentioned above contributed to the net sales increase.

Total international sales for 2012 were $1,707.6 million or 51.2% of net sales, an increase of $206.5 million or 13.8%, compared with international sales of $1,501.1 million or 50.2% of net sales in 2011. The $206.5 million increase in international sales resulted from the acquisitions mentioned above, primarily driven by Dunkermotoren, and includes the effect of foreign currency translation. Both reportable segments of the Company maintain strong international sales presences in Europe and Asia despite weakness in the global economy. Export shipments from the United States, which are included in total international sales, were $862.6 million in 2012, an increase of $87.7 million or 11.3%, compared with $774.9 million in 2011. Export shipments improved due to increased exports from the 2012 and 2011 acquisitions noted above, excluding Dunkermotoren and EM Test.

New orders for 2012 were a record at $3,535.1 million, an increase of $462.6 million or 15.1%, compared with $3,072.5 million in 2011. The increase in orders was primarily attributable to 2012 and 2011 acquisitions, excluding a 1% unfavorable effect of foreign currency translation. As a result, the Company’s backlog of unfilled orders at December 31, 2012 was a record at $1,112.3 million, an increase of $200.9 million or 22.0%, compared with $911.4 million at December 31, 2011.

Segment operating income for 2012 was $789.3 million, an increase of $106.4 million or 15.6%, compared with segment operating income of $682.9 million in 2011. Segment operating income, as a percentage of net sales, increased to 23.7% in 2012, compared with 22.8% in 2011. The increase in segment operating income and segment operating margins resulted primarily from the benefits of the Company’s lower cost structure through Operational Excellence initiatives.

Selling, general and administrative (“SG&A”) expenses for 2012 were $380.5 million, an increase of $31.2 million or 8.9%, compared with $349.3 million in 2011. As a percentage of net sales, SG&A expenses were 11.4% for 2012, compared with 11.7% in 2011. Selling expenses increased $34.7 million or 11.4% for 2012 primarily driven by the increase in net sales noted above. Selling expenses, as a percentage of net sales, were 10.1% for both 2012 and 2011. Base business selling expenses were essentially flat year over year, which was in line with internal sales growth.

Corporate administrative expenses for 2012 were $43.1 million, a decrease of $3.5 million or 7.5%, compared with $46.6 million in 2011. The decrease in corporate administrative expenses was primarily driven by lower consulting and compensation-related expenses. As a percentage of net sales, corporate administrative expenses were 1.3% for 2012, compared with 1.6% in 2011.

 

24


Table of Contents

Consolidated operating income was $745.9 million or 22.4% of net sales for 2012, an increase of $110.0 million or 17.3%, compared with $635.9 million or 21.3% of net sales in 2011.

Interest expense was $75.5 million for 2012, an increase of $5.8 million or 8.3%, compared with $69.7 million in 2011. The increase was due to higher borrowings under revolving credit facilities and higher fees associated with the full year impact of the revolving credit facility signed in September 2011 primarily for the acquisitions previously mentioned, as well as the full year impact of the issuance of a 55 million Swiss franc senior note in the fourth quarter of 2011.

Other expenses, net were $7.9 million for 2012, a decrease of $1.7 million, compared with $9.6 million in 2011. The decrease was primarily driven by higher investment income, a favorable impact from foreign currency in 2012 and the non-recurrence of costs incurred to demolish a vacant facility in 2011.

The effective tax rate for 2012 was 30.7%, compared with 30.9% in 2011. The effective tax rate for 2012 and 2011 includes the impact of international statutory tax rate reductions and the ongoing benefits obtained from international tax planning initiatives. See Note 9 to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K for further details.

Net income for 2012 was $459.1 million, an increase of $74.6 million or 19.4%, compared with $384.5 million in 2011. Diluted earnings per share for 2012 were $1.88, an increase of $0.30 or 19.0%, compared with $1.58 per diluted share in 2011.

Segment Results

EIG’s net sales totaled $1,872.6 million for 2012, an increase of $225.4 million or 13.7%, compared with $1,647.2 million in 2011. The net sales increase was due to internal growth of approximately 3%, excluding an unfavorable 1% effect of foreign currency translation, primarily driven by increases in EIG’s oil and gas, aerospace and power businesses. The acquisitions of Micro-Poise, O’Brien, TMC, EM Test and Reichert Technologies accounted for the remainder of the net sales increase.

EIG’s operating income was $497.1 million for 2012, an increase of $76.9 million or 18.3%, compared with $420.2 million in 2011. EIG’s operating margins were 26.5% of net sales for 2012, compared with 25.5% of net sales in 2011. The increase in segment operating income and operating margins was driven by the leveraged impact of the Group’s increase in internal sales growth noted above, as well as the benefit of the Group’s lower cost structure through Operational Excellence initiatives.

EMG’s net sales totaled $1,461.7 million for 2012, an increase of $119.0 million or 8.9%, compared with $1,342.7 million in 2011. The net sales increase was due to the acquisitions of Dunkermotoren, Coining and Avicenna, partially offset by an internal sales decline of 1% and an unfavorable 1% effect of foreign currency translation.

EMG’s operating income was $292.2 million for 2012, an increase of $29.5 million or 11.2%, compared with $262.7 million in 2011. EMG’s operating margins were 20.0% of net sales for 2012, compared with 19.6% of net sales in 2011. EMG’s increase in operating income and operating margins was primarily due to the benefit of the Group’s lower cost structure through Operational Excellence initiatives.

 

25


Table of Contents

Results of Operations for the year ended December 31, 2011 compared with the year ended December 31, 2010

In 2011, the Company established records for sales, operating income, operating income margins, net income, diluted earnings per share and operating cash flow. The Company achieved these results from strong internal growth in both EIG and EMG, as well as contributions from acquisitions completed in 2011 and the acquisitions of Technical Services for Electronics (“TSE”) in June 2010, Haydon Enterprises in July 2010 and Atlas Material Testing Technology LLC (“Atlas”) in November 2010.

Net sales for 2011 were $2,989.9 million, an increase of $518.9 million or 21.0%, compared with net sales of $2,471.0 million in 2010. Net sales for EIG were $1,647.2 million in 2011, an increase of 24.4% from net sales of $1,324.1 million in 2010. Net sales for EMG were $1,342.7 million in 2011, an increase of 17.1% from net sales of $1,146.8 million in 2010. The increase in net sales was primarily attributable to higher order rates, as well as the impact of the acquisitions mentioned above. The net sales increase for 2011 was driven by strong internal sales growth of approximately 11%, which excludes a 1% favorable effect of foreign currency translation. The acquisitions mentioned above contributed the remainder of the net sales increase.

Total international sales for 2011 were $1,501.1 million or 50.2% of net sales, an increase of $289.8 million or 23.9%, compared with international sales of $1,211.3 million or 49.0% of net sales in 2010. The $289.8 million increase in international sales resulted from higher sales growth noted above, driven by continued strong expansion into Asia, as well as growth in Europe, and includes the effect of foreign currency translation. Both reportable segments of the Company maintain strong international sales presences in Europe and Asia. Export shipments from the United States, which are included in total international sales, were $774.9 million in 2011, an increase of $210.4 million or 37.3%, compared with $564.5 million in 2010. Export shipments improved due to increased exports from both the base businesses and the acquisitions noted above.

New orders for 2011 were $3,072.5 million, an increase of $421.2 million or 15.9%, compared with $2,651.3 million in 2010. For 2011, internal order growth was approximately 8%, excluding a 1% favorable effect of foreign currency translation, driven by the differentiated businesses of both EIG and EMG, with the acquisitions mentioned above accounting for the remainder of the increase. As a result, the Company’s backlog of unfilled orders at December 31, 2011 was a year end record at $911.4 million, an increase of $82.6 million or 10.0%, compared with $828.8 million at December 31, 2010.

Segment operating income for 2011 was $682.9 million, an increase of $156.3 million or 29.7%, compared with segment operating income of $526.6 million in 2010. Segment operating income, as a percentage of net sales, increased to 22.8% in 2011 from 21.3% in 2010. The increase in segment operating income and segment operating margins resulted primarily from the leveraged impact of the Company’s internal sales growth increase noted above, as well as the benefits of the Company’s lower cost structure through Operational Excellence initiatives.

SG&A expenses for 2011 were $349.3 million, an increase of $52.8 million or 17.8%, compared with $296.5 million in 2010. As a percentage of net sales, SG&A expenses were 11.7% for 2011, compared with 12.0% in 2010. A portion of the increase in SG&A expenses was the result of a $2.1 million charge recorded in corporate administrative expenses related to the accelerated vesting of an April 2009 restricted stock grant in the second quarter of 2011. Selling expenses increased $49.4 million or 19.5% for 2011 driven by the increase in net sales noted above. Selling expenses, as a percentage of net sales, decreased to 10.1% for 2011, compared with 10.3% for 2010. Base business selling expenses increased approximately 11.6% for 2011, which was in line with internal sales growth.

Corporate administrative expenses for 2011 were $46.6 million, an increase of $3.5 million or 8.1%, compared with $43.1 million in 2010. As a percentage of net sales, corporate administrative expenses were 1.6% for 2011, compared with 1.7% in 2010. The increase in corporate administrative expenses was primarily the result of equity-based compensation expense associated with the accelerated vesting of restricted stock in the second quarter of 2011, noted above, as well as higher compensation-related expenses.

 

26


Table of Contents

Consolidated operating income was $635.9 million or 21.3% of net sales for 2011, an increase of $153.7 million or 31.9%, compared with $482.2 million or 19.5% of net sales in 2010.

Interest expense was $69.7 million for 2011, an increase of $2.2 million or 3.3%, compared with $67.5 million in 2010. The increase was primarily due to the full year impact of the issuance of an 80 million British pound senior note in the third quarter of 2010, partially offset by the repayment of a 50 million British pound senior note in the third quarter of 2010.

Other expenses, net were $9.6 million for 2011, an increase of $1.2 million, compared with $8.4 million in 2010. The increase was primarily driven by higher acquisition-related expenses and an unfavorable impact from foreign currency.

The effective tax rate for 2011 was 30.9%, compared with 30.1% in 2010. The effective tax rate for 2011 included the impact of the accelerated vesting of non-deductible restricted stock amortization. The effective tax rate for 2011 and 2010 included the impact of international statutory tax rate reductions and benefits obtained from a favorable mix of international taxable earnings. See Note 9 to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K for further details.

Net income for 2011 was $384.5 million, an increase of $100.6 million or 35.4%, compared with $283.9 million in 2010. Diluted earnings per share for 2011 were $1.58, an increase of $0.40 or 33.9%, compared with $1.18 per diluted share in 2010.

Segment Results

EIG’s net sales totaled $1,647.2 million for 2011, an increase of $323.1 million or 24.4%, compared with $1,324.1 million in 2010. The net sales increase was due to internal growth of approximately 16%, excluding a favorable 1% effect of foreign currency translation, primarily driven by increases in EIG’s process, power and industrial businesses. The acquisitions of EM Test, Reichert Technologies and Atlas accounted for the remainder of the net sales increase.

EIG’s operating income was $420.2 million for 2011, an increase of $104.0 million or 32.9%, compared with $316.2 million in 2010. EIG’s operating margins were 25.5% of net sales for 2011, compared with 23.9% of net sales in 2010. The increase in segment operating income and operating margins was driven by the leveraged impact of the Group’s increase in internal sales growth noted above, as well as the benefit of the Group’s lower cost structure through Operational Excellence initiatives.

EMG’s net sales totaled $1,342.7 million for 2011, an increase of $195.9 million or 17.1%, compared with $1,146.8 million in 2010. The net sales increase was due to internal growth of approximately 6%, excluding a favorable 1% effect of foreign currency translation, driven by increases in EMG’s differentiated businesses. The acquisitions of Coining, Avicenna, Haydon Enterprises and TSE accounted for the remainder of the net sales increase.

EMG’s operating income was $262.7 million for 2011, an increase of $52.3 million or 24.9%, compared with $210.4 million in 2010. EMG’s operating margins were 19.6% of net sales for 2011, compared with 18.3% of net sales in 2010. EMG’s increase in operating income and operating margins was primarily due to the leveraged impact of the Group’s increase in internal sales growth noted above, as well as the benefit of the Group’s lower cost structure through Operational Excellence initiatives.

 

27


Table of Contents

Liquidity and Capital Resources

Cash provided by operating activities totaled $612.5 million in 2012, an increase of $103.9 million or 20.4%, compared with $508.6 million in 2011. The increase in cash provided by operating activities was primarily due to the $74.6 million increase in net income. Free cash flow (cash flow provided by operating activities less capital expenditures) was $555.1 million in 2012, compared with $457.8 million in 2011. EBITDA (earnings before interest, income taxes, depreciation and amortization) was $842.7 million in 2012, compared with $712.2 million in 2011. Free cash flow and EBITDA are presented because the Company is aware that they are measures used by third parties in evaluating the Company. (See the “Notes to Selected Financial Data” included in Item 6 in this Annual Report on Form 10-K for a reconciliation of U.S. generally accepted accounting principles (“GAAP”) measures to comparable non-GAAP measures).

Cash used for investing activities totaled $803.7 million in 2012, compared with $526.5 million in 2011. In 2012, the Company paid $747.7 million for seven business acquisitions, net of cash received, compared with $474.9 million paid for five business acquisitions, net of cash received, in 2011. Additions to property, plant and equipment totaled $57.4 million in 2012, compared with $50.8 million in 2011.

Cash provided by financing activities totaled $174.5 million in 2012, compared with $31.9 million in 2011. In 2012, net total borrowings increased by $177.9 million, compared with a net total borrowings increase of $99.1 million in 2011. In 2012, the Company repurchased 141,000 shares of its common stock for $4.6 million, compared with $59.3 million used for repurchases of 2.5 million shares of the Company’s common stock in 2011. At December 31, 2012, $100.9 million was available under the Board authorization for future share repurchases.

In September 2011, AMETEK completed a new five-year revolving credit facility with a total borrowing capacity of $700 million, which excludes an accordion feature that permits the Company to request up to an additional $200 million in revolving credit commitments at any time during the life of the revolving credit agreement under certain conditions. Interest rates on outstanding loans under either the current or replaced revolving credit facility are at the applicable London Interbank Offered Rate plus a negotiated spread, or at the U.S. prime rate. The new revolving credit facility replaced a $450 million total borrowing capacity revolving credit facility, which excluded a $100 million accordion feature, that was due to expire in June 2012. The new revolving credit facility provides the Company with additional financial flexibility to support its growth plans, including its successful acquisition strategy. At December 31, 2012, the Company had available borrowing capacity of $557.6 million under its revolving credit facility, including the $200 million accordion feature.

At December 31, 2012, total debt outstanding was $1,453.8 million, compared with $1,263.9 million at December 31, 2011, with no significant maturities until 2015. The debt-to-capital ratio was 36.4% at December 31, 2012, compared with 38.1% at December 31, 2011. The net debt-to-capital ratio (total debt less cash and cash equivalents divided by the sum of net debt and stockholders’ equity) was 33.8% at December 31, 2012, compared with 34.8% at December 31, 2011. The net debt-to-capital ratio is presented because the Company is aware that this measure is used by third parties in evaluating the Company. (See the “Notes to Selected Financial Data” included in Item 6 in this Annual Report on Form 10-K for a reconciliation of U.S. GAAP measures to comparable non-GAAP measures).

Additional financing activities for 2012 include cash dividends paid of $53.1 million, compared with $38.4 million in 2011. The increase in dividends in 2012 was driven by the 50% increase in the quarterly cash dividend rate on the Company’s common stock to $0.06 per common share from $0.04 per common share on a post-split basis. Proceeds from the exercise of employee stock options were $39.4 million in 2012, compared with $19.6 million in 2011.

As a result of all of the Company’s cash flow activities in 2012, cash and cash equivalents at December 31, 2012 totaled $158.0 million, compared with $170.4 million at December 31, 2011. At December 31, 2012, the

 

28


Table of Contents

Company had $150.6 million in cash outside the United States, compared with $168.2 million at December 31, 2011. The Company utilizes this cash to operate its international operations, as well as acquire international businesses. The Company is in compliance with all covenants, including financial covenants, for all of its debt agreements. The Company believes it has sufficient cash-generating capabilities from domestic and unrestricted foreign sources, available credit facilities and access to long-term capital funds to enable it to meet its operating needs and contractual obligations in the foreseeable future.

The following table summarizes AMETEK’s contractual cash obligations and the effect such obligations are expected to have on the Company’s liquidity and cash flows in future years at December 31, 2012.

 

     Payments Due  

Contractual Obligations(1)

   Total      Less
Than
One Year
     One to
Three
Years
     Four to
Five
Years
     After
Five
Years
 
     (In millions)  

Long-term debt(2)

   $ 1,121.0       $       $ 191.0       $ 335.0       $ 595.0   

Revolving credit loans(3)

     312.9         312.9                           

Capital lease(4)

     10.1         1.0         2.1         2.2         4.8   

Other indebtedness

     9.8         6.8         1.1         1.9           
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total debt

     1,453.8         320.7         194.2         339.1         599.8   

Interest on long-term fixed-rate debt

     355.2         67.0         131.2         106.9         50.1   

Noncancellable operating leases(5)

     165.9         31.4         47.1         29.7         57.7   

Purchase obligations(6)

     325.6         308.6         16.5         0.5           

Employee severance and other

     11.7         10.5         0.6         0.6           
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 2,312.2       $ 738.2       $ 389.6       $ 476.8       $ 707.6   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

 

(1)

The liability for uncertain tax positions was not included in the table of contractual obligations as of December 31, 2012 because the timing of the settlements of these uncertain tax positions cannot be reasonably estimated at this time. See Note 9 to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K for further details.

 

(2)

Includes the $450 million private placement completed in 2007 and the $350 million private placement completed in 2008.

 

(3)

Although not contractually obligated, the Company expects to have the capability to repay the revolving credit loan within one year as permitted in the credit agreement. Accordingly, $312.9 million was classified as short-term debt at December 31, 2012.

 

(4)

Represents a capital lease for a building and land associated with the Cameca SAS acquisition. The lease has a term of 12 years, which began in July 2006, and is payable quarterly.

 

(5)

The leases expire over a range of years from 2013 to 2082 with renewal or purchase options, subject to various terms and conditions, contained in most of the leases.

 

(6)

Purchase obligations primarily consist of contractual commitments to purchase certain inventories at fixed prices.

Other Commitments

The Company has standby letters of credit and surety bonds of $38.1 million related to performance and payment guarantees at December 31, 2012. Based on experience with these arrangements, the Company believes that any obligations that may arise will not be material to its financial position.

 

29


Table of Contents

Critical Accounting Policies

The Company has identified its critical accounting policies as those accounting policies that can have a significant impact on the presentation of the Company’s financial condition and results of operations and that require the use of complex and subjective estimates based upon past experience and management’s judgment. Because of the uncertainty inherent in such estimates, actual results may differ materially from the estimates used. The consolidated financial statements and related notes contain information that is pertinent to the Company’s accounting policies and to Management’s Discussion and Analysis. The information that follows represents additional specific disclosures about the Company’s accounting policies regarding risks, estimates, subjective decisions or assessments whereby materially different financial condition and results of operations could have been reported had different assumptions been used or different conditions existed. Primary disclosure of the Company’s significant accounting policies is in Note 1 to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.

 

   

Revenue Recognition.    The Company recognizes revenue on product sales in the period when the sales process is complete. This generally occurs when products are shipped to the customer in accordance with terms of an agreement of sale, under which title and risk of loss have been transferred, collectability is reasonably assured and pricing is fixed or determinable. For a small percentage of sales where title and risk of loss passes at point of delivery, the Company recognizes revenue upon delivery to the customer, assuming all other criteria for revenue recognition are met. The Company’s policy, with respect to sales returns and allowances generally provides that the customer may not return products or be given allowances, except at the Company’s option. The Company has agreements with distributors that do not provide expanded rights of return for unsold products. The distributor purchases the product from the Company, at which time title and risk of loss transfers to the distributor. The Company does not offer substantial sales incentives and credits to its distributors other than volume discounts. The Company accounts for the sales incentive as a reduction of revenues when the sale is recognized. Accruals for sales returns, other allowances and estimated warranty costs are provided at the time revenue is recognized based upon past experience. At December 31, 2012, 2011 and 2010, the accrual for future warranty obligations was $27.8 million, $22.5 million and $18.3 million, respectively. The Company’s expense for warranty obligations was $10.1 million, $13.2 million and $10.6 million in 2012, 2011 and 2010, respectively. The warranty periods for products sold vary widely among the Company’s operations, but for the most part do not exceed one year. The Company calculates its warranty expense provision based on past warranty experience and adjustments are made periodically to reflect actual warranty expenses. If actual future sales returns and allowances and warranty amounts are higher than past experience, additional accruals may be required.

 

   

Accounts Receivable.    The Company maintains allowances for estimated losses resulting from the inability of specific customers to meet their financial obligations to the Company. A specific reserve for bad debts is recorded against the amount due from these customers. For all other customers, the Company recognizes reserves for bad debts based on the length of time specific receivables are past due based on its historical experience. If the financial condition of the Company’s customers were to deteriorate, resulting in their inability to make payments, additional allowances may be required. The allowance for possible losses on receivables was $10.8 million and $7.8 million at December 31, 2012 and 2011, respectively.

 

   

Inventories.    The Company uses the first-in, first-out (“FIFO”) method of accounting, which approximates current replacement cost, for approximately 79% of its inventories at December 31, 2012. The last-in, first-out (“LIFO”) method of accounting is used to determine cost for the remaining 21% of its inventory at December 31, 2012. For inventories where cost is determined by the LIFO method, the FIFO value would have been $25.4 million and $25.1 million higher than the LIFO value reported in the consolidated balance sheet at December 31, 2012 and 2011, respectively. The Company provides estimated inventory reserves for slow-moving and obsolete inventory based on current assessments about future demand, market conditions, customers who may be experiencing financial difficulties and related

 

30


Table of Contents
 

management initiatives. If these factors are less favorable than those projected by management, additional inventory reserves may be required.

 

   

Goodwill and Other Intangible Assets.    Goodwill and other intangible assets with indefinite lives, primarily trademarks and trade names, are not amortized; rather, they are tested for impairment at least annually. For the purpose of the goodwill impairment test, the Company can elect to perform a qualitative analysis to determine if it is more likely than not that the fair values of its reporting units are less than the respective carrying values of those reporting units. The Company elected to bypass performing the qualitative screen and went directly to performing the first step quantitative analysis of the goodwill impairment test in the current year. The Company may elect to perform the qualitative analysis in future periods. The first step in the quantitative process is to compare the carrying amount of the reporting unit’s net assets to the fair value of the reporting unit. If the fair value exceeds the carrying value, no further evaluation is required and no impairment loss is recognized. If the carrying amount exceeds the fair value, then the second step must be completed, which involves allocating the fair value of the reporting unit to each asset and liability, with the excess being implied goodwill. An impairment loss occurs if the amount of the recorded goodwill exceeds the implied goodwill. The Company would be required to record any such impairment losses.

The Company identifies its reporting units at the component level, which is one level below our operating segments. Generally, goodwill arises from acquisitions of specific operating companies and is assigned to the reporting unit in which a particular operating company resides. Our reporting units are composed of the business units one level below our operating segment at which discrete financial information is prepared and regularly reviewed by segment management.

The Company principally relies on a discounted cash flow analysis to determine the fair value of each reporting unit, which considers forecasted cash flows discounted at an appropriate discount rate. The Company believes that market participants would use a discounted cash flow analysis to determine the fair value of its reporting units in a sale transaction. The annual goodwill impairment test requires the Company to make a number of assumptions and estimates concerning future levels of revenue growth, operating margins, depreciation, amortization and working capital requirements, which are based upon the Company’s long-range plan. The Company’s long-range plan is updated as part of its annual planning process and is reviewed and approved by management. The discount rate is an estimate of the overall after-tax rate of return required by a market participant whose weighted average cost of capital includes both equity and debt, including a risk premium. While the Company uses the best available information to prepare its cash flow and discount rate assumptions, actual future cash flows or market conditions could differ significantly resulting in future impairment charges related to recorded goodwill balances. While there are always changes in assumptions to reflect changing business and market conditions, the Company’s overall methodology and the population of assumptions used have remained unchanged. In order to evaluate the sensitivity of the goodwill impairment test to changes in the fair value calculations, the Company applied a hypothetical 10% decrease in fair values of each reporting unit. The 2012 results (expressed as a percentage of carrying value for the respective reporting unit) showed that, despite the hypothetical 10% decrease in fair value, the fair values of the Company’s reporting units still exceeded their respective carrying values by 53% to 490% for each of the Company’s reporting units.

The impairment test for indefinite-lived intangibles other than goodwill (primarily trademarks and trade names) consists of a comparison of the fair value of the indefinite-lived intangible asset to the carrying value of the asset as of the impairment testing date. The Company estimates the fair value of its indefinite-lived intangibles using the relief from royalty method. The Company believes the relief from royalty method is a widely used valuation technique for such assets. The fair value derived from the relief from royalty method is measured as the discounted cash flow savings realized from owning such trademarks and trade names and not having to pay a royalty for their use.

 

31


Table of Contents

The Company’s acquisitions have generally included a significant goodwill component and the Company expects to continue to make acquisitions. At December 31, 2012, goodwill and other indefinite-lived intangible assets totaled $2,615.3 million or 50.4% of the Company’s total assets. The Company performed its required annual impairment tests in the fourth quarter of 2012 and determined that the Company’s goodwill and indefinite-lived intangibles were not impaired. There can be no assurance that goodwill or indefinite-lived intangibles impairment will not occur in the future.

Other intangible assets with finite lives are evaluated for impairment when events or changes in circumstances indicate the carrying value may not be recoverable. The carrying value of other intangible assets with finite lives is considered impaired when the total projected undiscounted cash flows from those assets are less than the carrying value. In that event, a loss is recognized based on the amount by which the carrying value exceeds the fair market value of those assets. Fair market value is determined primarily using present value techniques based on projected cash flows from the asset group.

 

   

Pensions.    The Company has U.S. and foreign defined benefit and defined contribution pension plans. The most significant elements in determining the Company’s pension income or expense are the assumed pension liability discount rate and the expected return on plan assets. The pension discount rate reflects the current interest rate at which the pension liabilities could be settled at the valuation date. At the end of each year, the Company determines the assumed discount rate to be used to discount plan liabilities. In estimating this rate for 2012, the Company considered rates of return on high-quality, fixed-income investments that have maturities consistent with the anticipated funding requirements of the plan. The discount rate used in determining the 2012 pension cost was 5.0% for U.S. defined benefit pension plans and 5.22% for foreign plans. The discount rate used for determining the funded status of the plans at December 31, 2012 and determining the 2013 defined benefit pension cost was 4.1% for U.S. plans and 4.44% for foreign plans. In estimating the U.S. and foreign discount rates, the Company’s actuaries developed a customized discount rate appropriate to the plans’ projected benefit cash flow based on yields derived from a database of long-term bonds at consistent maturity dates. The Company used an expected long-term rate of return on plan assets for 2012 of 8.0% for U.S. defined benefit pension plans and 6.96% for foreign plans. The Company will use 7.75% for the U.S. plans in 2013 and 6.91% for the foreign plans in 2013. The Company determines the expected long-term rate of return based primarily on its expectation of future returns for the pension plans’ investments. Additionally, the Company considers historical returns on comparable fixed-income and equity investments, and adjusts its estimate as deemed appropriate. The rate of compensation increase used in determining the 2012 pension expense for the U.S. plans was 3.75% and was 2.97% for the foreign plans. The U.S. rate of compensation increase will remain unchanged in 2013. The foreign plans’ rates of compensation increase will decrease slightly to 2.89% in 2013. In 2012, the Company recognized consolidated pre-tax pension expense of $2.3 million from its U.S. and foreign defined benefit pension plans, compared with pre-tax pension income of $7.4 million recognized for these plans in 2011. The Company estimates its 2013 U.S. and foreign defined benefit pension pre-tax expense to be approximately $1.3 million.

All unrecognized prior service costs, remaining transition obligations or assets and actuarial gains and losses have been recognized, net of tax effects, as a charge to accumulated other comprehensive income in stockholders’ equity and will be amortized as a component of net periodic pension cost. The Company uses a December 31 measurement date (the date at which plan assets and benefit obligations are measured) for its U.S. and foreign defined benefit plans.

To fund the plans, the Company made cash contributions to its defined benefit pension plans in 2012, which totaled $4.3 million, compared with $5.4 million in 2011. The Company anticipates making approximately $2 million to $5 million in cash contributions to its defined benefit pension plans in 2013.

 

   

Income Taxes.    The process of providing for income taxes and determining the related balance sheet accounts requires management to assess uncertainties, make judgments regarding outcomes and utilize

 

32


Table of Contents
 

estimates. The Company conducts a broad range of operations around the world and is therefore subject to complex tax regulations in numerous international taxing jurisdictions, resulting at times in tax audits, disputes and potential litigation, the outcome of which is uncertain. Management must make judgments currently about such uncertainties and determine estimates of the Company’s tax assets and liabilities. To the extent the final outcome differs, future adjustments to the Company’s tax assets and liabilities may be necessary.

The Company assesses the realizability of its deferred tax assets, taking into consideration the Company’s forecast of future taxable income, available net operating loss carryforwards and available tax planning strategies that could be implemented to realize the deferred tax assets. Based on this assessment, management must evaluate the need for, and the amount of, valuation allowances against the Company’s deferred tax assets. To the extent facts and circumstances change in the future, adjustments to the valuation allowances may be required.

The Company assesses the uncertainty in its tax positions, by applying a minimum recognition threshold which a tax position is required to meet before a tax benefit is recognized in the financial statements. Once the minimum threshold is met, using a more likely than not standard, a series of probability estimates is made for each item to properly measure and record a tax benefit. The tax benefit recorded is generally equal to the highest probable outcome that is more than 50% likely to be realized after full disclosure and resolution of a tax examination. The underlying probabilities are determined based on the best available objective evidence such as recent tax audit outcomes, published guidance, external expert opinion, or by analogy to the outcome of similar issues in the past. There can be no assurance that these estimates will ultimately be realized given continuous changes in tax policy, legislation and audit practice. The Company recognizes interest and penalties accrued related to uncertain tax positions in income tax expense.

Recent Accounting Pronouncements

In May 2011, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2011-04, Amendments to Achieve Common Fair Value Measurement and Disclosure Requirements in U.S. GAAP and IFRSs (“ASU 2011-04”). ASU 2011-04 amendments result in a consistent definition of fair value and common requirements for measurement of and disclosure about fair value between U.S. GAAP and International Financial Reporting Standards (“IFRSs”). ASU 2011-04 was effective on January 1, 2012 for the Company and the adoption did not have a significant impact on the Company’s consolidated results of operations, financial position or cash flows.

In June 2011, the FASB issued ASU No. 2011-05, Presentation of Comprehensive Income (“ASU 2011-05”). ASU 2011-05 requires that all nonowner changes in stockholders’ equity be presented either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In the two-statement approach, the first statement should present total net income and its components followed consecutively by a second statement that should present total other comprehensive income, the components of other comprehensive income and the total of comprehensive income. For interim periods, issuers are only required to provide a total of comprehensive income. These amendments do not change the items that must be reported in other comprehensive income. The Company adopted ASU 2011-05 effective January 1, 2012. See the Consolidated Statement of Comprehensive Income.

In September 2011, the FASB issued ASU No. 2011-08, Testing Goodwill for Impairment (“ASU 2011-08”). The amendments in ASU 2011-08 permit an entity to first assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount as a basis for determining whether it is necessary to perform the two-step goodwill impairment test described in FASB Accounting Standards Codification Topic 350, Intangibles – Goodwill and Other. ASU 2011-08 was effective on January 1, 2012 for the Company and the adoption did not have a significant impact on the Company’s consolidated results of operations, financial position or cash flows.

 

33


Table of Contents

In July 2012, the FASB issued ASU No. 2012-02, Testing Indefinite-Lived Intangible Assets for Impairment (“ASU 2012-02”). The amendments in ASU 2012-02, similar to the amendments of ASU 2011-08, permit an entity to first assess qualitative factors to determine whether it is more likely than not that the fair value of an indefinite-lived intangible asset is impaired, as a basis for determining whether it is necessary to perform the quantitative impairment test described in FASB Accounting Standards Codification Topic 350, Intangibles – Goodwill and Other. ASU 2012-02 is effective for annual and interim impairment tests performed for fiscal years beginning after September 15, 2012. The Company does not expect the adoption of ASU 2012-02 to have a significant impact on the Company’s consolidated results of operations, financial position or cash flows.

Internal Reinvestment

Capital Expenditures

Capital expenditures were $57.4 million or 1.7% of net sales in 2012, compared with $50.8 million or 1.7% of net sales in 2011. In 2012, 53% of the expenditures were for improvements to existing equipment or additional equipment to increase productivity and expand capacity. The Company’s 2012 capital expenditures increased due to a continuing emphasis on spending to improve productivity and expand manufacturing capabilities. The 2013 capital expenditures are expected to approximate 1.8% of net sales, with a continued emphasis on spending to improve productivity.

Development and Engineering

The Company is committed to research, development and engineering activities that are designed to identify and develop potential new and improved products or enhance existing products. Research, development and engineering costs before customer reimbursement were $154.8 million, $137.6 million and $112.1 million in 2012, 2011 and 2010, respectively. Customer reimbursements in 2012, 2011 and 2010 were $5.0 million, $6.1 million and $6.4 million, respectively. These amounts included net Company-funded research and development expenses of $84.9 million, $78.0 million and $56.8 million in 2012, 2011 and 2010, respectively. All such expenditures were directed toward the development of new products and processes and the improvement of existing products and processes.

Environmental Matters

Certain historic processes in the manufacture of products have resulted in environmentally hazardous waste by-products as defined by federal and state laws and regulations. The Company believes these waste products were handled in compliance with regulations existing at that time. At December 31, 2012, the Company is named a Potentially Responsible Party (“PRP”) at 14 non-AMETEK-owned former waste disposal or treatment sites (the “non-owned” sites). The Company is identified as a “de minimis” party in 13 of these sites based on the low volume of waste attributed to the Company relative to the amounts attributed to other named PRPs. In nine of these sites, the Company has reached a tentative agreement on the cost of the de minimis settlement to satisfy its obligation and is awaiting executed agreements. The tentatively agreed-to settlement amounts are fully reserved. In the other four sites, the Company is continuing to investigate the accuracy of the alleged volume attributed to the Company as estimated by the parties primarily responsible for remedial activity at the sites to establish an appropriate settlement amount. At the remaining site where the Company is a non-de minimis PRP, the Company is participating in the investigation and/or related required remediation as part of a PRP Group and reserves have been established sufficient to satisfy the Company’s expected obligations. The Company historically has resolved these issues within established reserve levels and reasonably expects this result will continue. In addition to these non-owned sites, the Company has an ongoing practice of providing reserves for probable remediation activities at certain of its current or previously owned manufacturing locations (the “owned” sites). For claims and proceedings against the Company with respect to other environmental matters, reserves are established once the Company has determined that a loss is probable and estimable. This estimate is refined as the Company moves through the various stages of investigation, risk assessment, feasibility study and corrective action processes. In

 

34


Table of Contents

certain instances, the Company has developed a range of estimates for such costs and has recorded a liability based on the low end of the range. It is reasonably possible that the actual cost of remediation of the individual sites could vary from the current estimates and the amounts accrued in the consolidated financial statements; however, the amounts of such variances are not expected to result in a material change to the consolidated financial statements. In estimating the Company’s liability for remediation, the Company also considers the likely proportionate share of the anticipated remediation expense and the ability of the other PRPs to fulfill their obligations.

Total environmental reserves at December 31, 2012 and 2011 were $23.6 million and $28.0 million, respectively, for both non-owned and owned sites. In 2012, the Company recorded $0.7 million in reserves. Additionally, the Company spent $5.1 million on environmental matters in 2012. The Company’s reserves for environmental liabilities at December 31, 2012 and 2011 include reserves of $14.7 million and $17.5 million, respectively, for an owned site acquired in connection with the 2005 acquisition of HCC Industries (“HCC”). The Company is the designated performing party for the performance of remedial activities for one of several operating units making up a Superfund site in the San Gabriel Valley of California. The Company has obtained indemnifications and other financial assurances from the former owners of HCC related to the costs of the required remedial activities. At December 31, 2012, the Company had $11.3 million in receivables related to HCC for probable recoveries from third-party escrow funds and other committed third-party funds to support the required remediation. Also, the Company is indemnified by HCC’s former owners for approximately $19.0 million of additional costs.

The Company has agreements with other former owners of certain of its acquired businesses, as well as new owners of previously owned businesses. Under certain of the agreements, the former or new owners retained, or assumed and agreed to indemnify the Company against, certain environmental and other liabilities under certain circumstances. The Company and some of these other parties also carry insurance coverage for some environmental matters. To date, these parties have met their obligations in all material respects.

The Company believes it has established reserves which are sufficient to perform all known responsibilities under existing claims and consent orders. The Company has no reason to believe that other third parties would fail to perform their obligations in the future. In the opinion of management, based upon presently available information and past experience related to such matters, an adequate provision for probable costs has been made and the ultimate cost resulting from these actions is not expected to materially affect the consolidated results of operations, financial position or cash flows of the Company.

Market Risk

The Company’s primary exposures to market risk are fluctuations in interest rates, foreign currency exchange rates and commodity prices, which could impact its financial condition and results of operations. The Company addresses its exposure to these risks through its normal operating and financing activities. The Company’s differentiated and global business activities help to reduce the impact that any particular market risk may have on its operating income as a whole.

The Company’s short-term debt carries variable interest rates and generally its long-term debt carries fixed rates. These financial instruments are more fully described in the Notes to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.

The foreign currencies to which the Company has the most significant exchange rate exposure are the Euro, the British pound, the Japanese Yen, the Chinese renminbi and the Mexican peso. Exposure to foreign currency rate fluctuation is monitored, and when possible, mitigated through the use of local borrowings and occasional derivative financial instruments in the foreign country affected. The effect of translating foreign subsidiaries’ balance sheets into U.S. dollars is included in other comprehensive income within stockholders’ equity. Foreign

 

35


Table of Contents

currency transactions have not had a significant effect on the operating results reported by the Company because revenues and costs associated with the revenues are generally transacted in the same foreign currencies.

The primary commodities to which the Company has market exposure are raw material purchases of nickel, aluminum, copper, steel, titanium and gold. Exposure to price changes in these commodities are generally mitigated through adjustments in selling prices of the ultimate product and purchase order pricing arrangements, although forward contracts are sometimes used to manage some of those exposures.

Based on a hypothetical ten percent adverse movement in interest rates, commodity prices or foreign currency exchange rates, the Company’s best estimate is that the potential losses in future earnings, fair value of risk-sensitive financial instruments and cash flows are not material, although the actual effects may differ materially from the hypothetical analysis.

Forward-Looking Information

Certain matters discussed in this Form 10-K are “forward-looking statements” as defined in the Private Securities Litigation Reform Act of 1995 (“PSLRA”), which involve risk and uncertainties that exist in the Company’s operations and business environment and can be affected by inaccurate assumptions, or by known or unknown risks and uncertainties. Many such factors will be important in determining the Company’s actual future results. The Company wishes to take advantage of the “safe harbor” provisions of the PSLRA by cautioning readers that numerous important factors, in some cases have caused, and in the future could cause, the Company’s actual results to differ materially from those expressed in any forward-looking statements made by, or on behalf of, the Company. Some, but not all, of the factors or uncertainties that could cause actual results to differ from present expectations are set forth above and under Item 1A. Risk Factors. The Company undertakes no obligation to publicly update any forward-looking statements, whether as a result of new information, subsequent events or otherwise, unless required by the securities laws to do so.

 

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Information concerning market risk is set forth under the heading “Market Risk” in Management’s Discussion and Analysis of Financial Condition and Results of Operations herein.

 

36


Table of Contents
Item 8. Financial Statements and Supplementary Data

 

     Page  

Index to Financial Statements (Item 15(a) 1)

  

Reports of Management

     38   

Reports of Independent Registered Public Accounting Firm

     39   

Consolidated Statement of Income for the years ended December 31, 2012, 2011 and 2010

     41   

Consolidated Statement of Comprehensive Income for the years ended December 31, 2012, 2011 and 2010

     42   

Consolidated Balance Sheet at December 31, 2012 and 2011

     43   

Consolidated Statement of Stockholders’ Equity for the years ended December  31, 2012, 2011 and 2010

     44   

Consolidated Statement of Cash Flows for the years ended December 31, 2012, 2011 and 2010

     45   

Notes to Consolidated Financial Statements

     46   

Financial Statement Schedules (Item 15(a) 2)

Financial statement schedules have been omitted because either they are not applicable or the required information is included in the financial statements or the notes thereto.

 

37


Table of Contents

Management’s Responsibility for Financial Statements

Management has prepared and is responsible for the integrity of the consolidated financial statements and related information. The statements are prepared in conformity with U.S. generally accepted accounting principles consistently applied and include certain amounts based on management’s best estimates and judgments. Historical financial information elsewhere in this report is consistent with that in the financial statements.

In meeting its responsibility for the reliability of the financial information, management maintains a system of internal accounting and disclosure controls, including an internal audit program. The system of controls provides for appropriate division of responsibility and the application of written policies and procedures. That system, which undergoes continual reevaluation, is designed to provide reasonable assurance that assets are safeguarded and records are adequate for the preparation of reliable financial data.

Management is responsible for establishing and maintaining adequate internal control over financial reporting. We maintain a system of internal controls that is designed to provide reasonable assurance as to the fair and reliable preparation and presentation of the consolidated financial statements; however, there are inherent limitations in the effectiveness of any system of internal controls.

Management recognizes its responsibility for conducting the Company’s activities according to the highest standards of personal and corporate conduct. That responsibility is characterized and reflected in a code of business conduct for all employees and in a financial code of ethics for the Chief Executive Officer and Senior Financial Officers, as well as in other key policy statements publicized throughout the Company.

The Audit Committee of the Board of Directors, which is composed solely of independent directors who are not employees of the Company, meets with the independent registered public accounting firm, the internal auditors and management to satisfy itself that each is properly discharging its responsibilities. The report of the Audit Committee is included in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders. Both the independent registered public accounting firm and the internal auditors have direct access to the Audit Committee.

The Company’s independent registered public accounting firm, Ernst & Young LLP, is engaged to render an opinion as to whether management’s financial statements present fairly, in all material respects, the Company’s financial position and operating results. This report is included herein.

Management’s Report on Internal Control over Financial Reporting

Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in the Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of the Company’s internal control over financial reporting as of December 31, 2012 based on the framework in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on that evaluation, our management concluded that the Company’s internal control over financial reporting was effective as of December 31, 2012.

The Company’s internal control over financial reporting as of December 31, 2012 has been audited by Ernst & Young LLP, an independent registered public accounting firm, as stated in their report, which is included herein.

AMETEK, Inc.

February 21, 2013

 

38


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

ON INTERNAL CONTROL OVER FINANCIAL REPORTING

To the Board of Directors and Stockholders of AMETEK, Inc.:

We have audited AMETEK, Inc.’s internal control over financial reporting as of December 31, 2012, based on criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). AMETEK, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, AMETEK, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2012, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of AMETEK, Inc. as of December 31, 2012 and 2011, and the related consolidated statements of income, comprehensive income, stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2012, and our report dated February 21, 2013 expressed an unqualified opinion thereon.

/s/ ERNST & YOUNG LLP

Philadelphia, Pennsylvania

February 21, 2013

 

39


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

ON FINANCIAL STATEMENTS

To the Board of Directors and Stockholders of AMETEK, Inc.:

We have audited the accompanying consolidated balance sheets of AMETEK, Inc. as of December 31, 2012 and 2011, and the related consolidated statements of income, comprehensive income, stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2012. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of AMETEK, Inc. at December 31, 2012 and 2011, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2012, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), AMETEK, Inc.’s internal control over financial reporting as of December 31, 2012, based on criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 21, 2013 expressed an unqualified opinion thereon.

/s/ ERNST & YOUNG LLP

Philadelphia, Pennsylvania

February 21, 2013

 

40


Table of Contents

AMETEK, Inc.

Consolidated Statement of Income

(In thousands, except per share amounts)

 

     Year Ended December 31,  
     2012     2011     2010  

Net sales

   $ 3,334,213      $ 2,989,914      $ 2,470,952   
  

 

 

   

 

 

   

 

 

 

Operating expenses:

      

Cost of sales, excluding depreciation

     2,154,132        1,955,779        1,646,892   

Selling, general and administrative

     380,532        349,321        296,482   

Depreciation

     53,677        48,873        45,420   
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     2,588,341        2,353,973        1,988,794   
  

 

 

   

 

 

   

 

 

 

Operating income

     745,872        635,941        482,158   

Other expenses:

      

Interest expense

     (75,472     (69,729     (67,522

Other, net

     (7,925     (9,570     (8,386
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     662,475        556,642        406,250   

Provision for income taxes

     203,343        172,178        122,318   
  

 

 

   

 

 

   

 

 

 

Net income

   $ 459,132      $ 384,464      $ 283,932   
  

 

 

   

 

 

   

 

 

 
      

Basic earnings per share

   $ 1.90      $ 1.60      $ 1.19   
  

 

 

   

 

 

   

 

 

 

Diluted earnings per share

   $ 1.88      $ 1.58      $ 1.18   
  

 

 

   

 

 

   

 

 

 

Weighted average common shares outstanding:

      

Basic shares

     241,512        240,383        238,584   
  

 

 

   

 

 

   

 

 

 

Diluted shares

     243,986        243,161        241,326   
  

 

 

   

 

 

   

 

 

 

 

See accompanying notes.

 

41


Table of Contents

AMETEK, Inc.

Consolidated Statement of Comprehensive Income

(In thousands)

 

     Year Ended December 31,  
     2012     2011     2010  

Net income

   $ 459,132      $ 384,464      $ 283,932   
  

 

 

   

 

 

   

 

 

 

Other comprehensive income (loss):

      

Amounts arising during the period — gains (losses), net of tax (expense) benefit:

      

Foreign currency translation:

      

Translation adjustments

     24,648        (17,089     (29,791

Net investment hedges, net of tax of ($1,416), $221 and $1,893 in 2012, 2011 and 2010, respectively

     2,629        (410     (3,515

Defined benefit pension plans:

      

Net actuarial (loss) gain, net of tax of $15,222, $28,505 and ($7,189) in 2012, 2011 and 2010, respectively

     (30,509     (50,582     11,864   

Less: Amortization of net actuarial loss, net of tax of ($4,598), ($1,358) and ($2,659) in 2012, 2011 and 2010, respectively

     7,563        2,914        4,306   

Less: Amortization of prior service costs, net of tax of ($441), ($30) and ($95) in 2012, 2011 and 2010, respectively

     1,541        33        153   

Unrealized holding gain (loss) on available-for-sale securities:

      

Unrealized gain (loss), net of tax of $33, ($92) and $165 in 2012, 2011 and 2010, respectively

     61        (171     306   
  

 

 

   

 

 

   

 

 

 

Other comprehensive income (loss)

     5,933        (65,305     (16,677
  

 

 

   

 

 

   

 

 

 

Total comprehensive income

   $ 465,065      $ 319,159      $ 267,255   
  

 

 

   

 

 

   

 

 

 

 

See accompanying notes.

 

42


Table of Contents

AMETEK, Inc.

Consolidated Balance Sheet

(In thousands, except share amounts)

 

     December 31,  
     2012     2011  

ASSETS

    

Current assets:

    

Cash and cash equivalents

   $ 157,984      $ 170,392   

Receivables, less allowance for possible losses

     507,850        438,245   

Inventories

     428,935        380,471   

Deferred income taxes

     33,301        29,268   

Other current assets

     36,673        40,743   
  

 

 

   

 

 

 

Total current assets

     1,164,743        1,059,119   

Property, plant and equipment, net

     383,483        325,329   

Goodwill

     2,208,239        1,806,237   

Other intangibles, net of accumulated amortization

     1,309,727        982,957   

Investments and other assets

     123,864        145,848   
  

 

 

   

 

 

 

Total assets

   $ 5,190,056      $ 4,319,490   
  

 

 

   

 

 

 

LIABILITIES AND STOCKHOLDERS’ EQUITY

    

Current liabilities:

    

Short-term borrowings and current portion of long-term debt

   $ 320,654      $ 140,508   

Accounts payable

     321,183        283,068   

Income taxes payable

     40,598        24,127   

Accrued liabilities

     197,534        181,172   
  

 

 

   

 

 

 

Total current liabilities

     879,969        628,875   

Long-term debt

     1,133,121        1,123,416   

Deferred income taxes

     482,852        389,088   

Other long-term liabilities

     158,963        125,306   
  

 

 

   

 

 

 

Total liabilities

     2,654,905        2,266,685   
  

 

 

   

 

 

 

Stockholders’ equity:

    

Preferred stock, $0.01 par value; authorized: 5,000,000 shares; none issued

              

Common stock, $0.01 par value; authorized: 400,000,000 shares;
issued: 2012 — 256,451,866 shares; 2011 — 253,824,112 shares

     2,565        2,538   

Capital in excess of par value

     387,871        315,688   

Retained earnings

     2,507,419        2,101,615   

Accumulated other comprehensive loss

     (151,330     (157,263

Treasury stock: 2012 — 13,056,595 shares; 2011 — 13,266,742 shares

     (211,374     (209,773
  

 

 

   

 

 

 

Total stockholders’ equity

     2,535,151        2,052,805   
  

 

 

   

 

 

 

Total liabilities and stockholders’ equity

   $ 5,190,056      $ 4,319,490   
  

 

 

   

 

 

 

 

See accompanying notes.

 

43


Table of Contents

AMETEK, Inc.

Consolidated Statement of Stockholders’ Equity

(In thousands)

 

     Year Ended December 31,  
     2012     2011     2010  

Capital Stock

      

Preferred stock, $0.01 par value

   $      $      $   
  

 

 

   

 

 

   

 

 

 

Common stock, $0.01 par value

      

Balance at the beginning of the year

     2,538        2,521        2,498   

Shares issued

     27        17        23   
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

     2,565        2,538        2,521   
  

 

 

   

 

 

   

 

 

 

Capital in Excess of Par Value

      

Balance at the beginning of the year

     315,688        262,450        222,669   

Issuance of common stock under employee stock plans

     37,829        18,035        14,195   

Share-based compensation costs

     19,384        22,147        16,596   

Excess tax benefits from exercise of stock options

     14,970        13,056        8,990   
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

     387,871        315,688        262,450   
  

 

 

   

 

 

   

 

 

 

Retained Earnings

      

Balance at the beginning of the year

     2,101,615        1,755,742        1,500,471   

Net income

     459,132        384,464        283,932   

Cash dividends paid

     (53,083     (38,366     (28,554

Other

     (245     (225     (107
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

     2,507,419        2,101,615        1,755,742   
  

 

 

   

 

 

   

 

 

 

Accumulated Other Comprehensive (Loss) Income

      

Foreign currency translation:

      

Balance at the beginning of the year

     (58,901     (41,402     (8,096

Increase (decrease) during the year, net of tax

     27,277        (17,499     (33,306
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

     (31,624     (58,901     (41,402
  

 

 

   

 

 

   

 

 

 

Defined benefit pension plans:

      

Balance at the beginning of the year

     (98,433     (50,798     (67,121

(Decrease) increase during the year, net of tax

     (21,405     (47,635     16,323   
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

     (119,838     (98,433     (50,798
  

 

 

   

 

 

   

 

 

 

Unrealized holding gain (loss) on available-for-sale securities:

      

Balance at the beginning of the year

     71        242        (64

Increase (decrease) during the year, net of tax

     61        (171     306   
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

     132        71        242   
  

 

 

   

 

 

   

 

 

 

Accumulated other comprehensive loss at the end of the year

     (151,330     (157,263     (91,958
  

 

 

   

 

 

   

 

 

 

Treasury Stock

      

Balance at the beginning of the year

     (209,773     (153,551     (83,333

Issuance of common stock under employee stock plans

     3,041        3,114        8,391   

Purchase of treasury stock

     (4,642     (59,336     (78,609
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

     (211,374     (209,773     (153,551
  

 

 

   

 

 

   

 

 

 

Total Stockholders’ Equity

   $ 2,535,151      $ 2,052,805      $ 1,775,204   
  

 

 

   

 

 

   

 

 

 

 

See accompanying notes.

 

44


Table of Contents

AMETEK, Inc.

Consolidated Statement of Cash Flows

(In thousands)

 

     Year Ended December 31,  
     2012     2011     2010  

Cash provided by (used for):

      

Operating activities:

      

Net income

   $ 459,132      $ 384,464      $ 283,932   

Adjustments to reconcile net income to total operating activities:

      

Depreciation and amortization

     105,471        86,532        72,896   

Deferred income taxes

     3,552        12,154        3,774   

Share-based compensation expense

     19,384        22,147        16,596   

Changes in assets and liabilities, net of acquisitions:

      

Increase in receivables

     (4,225     (12,450     (43,179

Decrease (increase) in inventories and other current assets

     29,555        (11,923     7,334   

(Decrease) increase in payables, accruals and income taxes

     (10,304     28,053        77,773   

Increase in other long-term liabilities

     9,535        550        6,382   

Pension contribution

     (4,292     (5,386     (3,555

Other

     4,656        4,424        1,060   
  

 

 

   

 

 

   

 

 

 

Total operating activities

     612,464        508,565        423,013   
  

 

 

   

 

 

   

 

 

 
      

Investing activities:

      

Additions to property, plant and equipment

     (57,427     (50,816     (39,183

Purchases of businesses, net of cash acquired

     (747,675     (474,441     (538,585

Other

     1,371        (1,196     10,945   
  

 

 

   

 

 

   

 

 

 

Total investing activities

     (803,731     (526,453     (566,823
  

 

 

   

 

 

   

 

 

 
      

Financing activities:

      

Net change in short-term borrowings

     179,426        41,550        92,364   

Additional long-term borrowings

            58,981        125,120   

Reduction in long-term borrowings

     (1,539     (1,463     (78,200

Repurchases of common stock

     (4,642     (59,336     (78,609

Cash dividends paid

     (53,083     (38,366     (28,554

Excess tax benefits from share-based payments

     14,970        13,056        8,990   

Proceeds from employee stock plans and other

     39,407        17,436        21,518   
  

 

 

   

 

 

   

 

 

 

Total financing activities

     174,539        31,858        62,629   
  

 

 

   

 

 

   

 

 

 
      

Effect of exchange rate changes on cash and cash equivalents

     4,320        (6,786     (1,967
  

 

 

   

 

 

   

 

 

 
      

(Decrease) increase in cash and cash equivalents

     (12,408     7,184        (83,148
      

Cash and cash equivalents:

      

Beginning of year

     170,392        163,208        246,356   
  

 

 

   

 

 

   

 

 

 

End of year

   $ 157,984      $ 170,392      $ 163,208   
  

 

 

   

 

 

   

 

 

 

 

See accompanying notes.

 

45


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

 

1.

Significant Accounting Policies

Basis of Consolidation

The accompanying consolidated financial statements reflect the results of operations, financial position and cash flows of AMETEK, Inc. (the “Company”), and include the accounts of the Company and subsidiaries, after elimination of all intercompany transactions in the consolidation. The Company’s investments in 50% or less owned joint ventures are accounted for by the equity method of accounting. Such investments are not significant to the Company’s consolidated results of operations, financial position or cash flows.

Use of Estimates

The preparation of financial statements in conformity with U.S. generally accepted accounting principles (“GAAP”) requires management to make estimates and assumptions that affect amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.

Cash Equivalents, Securities and Other Investments

All highly liquid investments with maturities of three months or less when purchased are considered cash equivalents. At December 31, 2012 and 2011, all of the Company’s investments in equity securities and fixed-income securities (primarily those held by its captive insurance subsidiary) are classified as “available-for-sale,” although the Company may hold fixed-income securities until their maturity dates. Fixed-income securities generally mature within three years. The aggregate market value of equity and fixed-income securities at December 31, 2012 and 2011 was $8.3 million ($8.3 million amortized cost) and $7.3 million ($7.3 million amortized cost), respectively. The temporary unrealized gain or loss on such securities is recorded as a separate component of accumulated other comprehensive income (in stockholders’ equity), and is not significant. Certain of the Company’s other investments, which are not significant, are also accounted for by the equity method of accounting as discussed above.

Accounts Receivable

The Company maintains allowances for estimated losses resulting from the inability of specific customers to meet their financial obligations to the Company. A specific reserve for doubtful receivables is recorded against the amount due from these customers. For all other customers, the Company recognizes reserves for doubtful receivables based on the length of time specific receivables are past due based on past experience. The allowance for possible losses on receivables was $10.8 million and $7.8 million at December 31, 2012 and 2011, respectively. See Note 8.

Inventories

The Company uses the first-in, first-out (“FIFO”) method of accounting, which approximates current replacement cost, for 79% of its inventories at December 31, 2012. The last-in, first-out (“LIFO”) method of accounting is used to determine cost for the remaining 21% of the Company’s inventory at December 31, 2012. For inventories where cost is determined by the LIFO method, the excess of the FIFO value over the LIFO value was $25.4 million and $25.1 million at December 31, 2012 and 2011, respectively. The Company provides estimated inventory reserves for slow-moving and obsolete inventory based on current assessments about future demand, market conditions, customers who may be experiencing financial difficulties and related management initiatives.

 

46


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Business Combinations

The Company allocates the purchase price of an acquired company, including when applicable, the fair value of contingent consideration between tangible and intangible assets acquired and liabilities assumed from the acquired business based on their estimated fair values, with the residual of the purchase price recorded as goodwill. The results of operations of the acquired business are included in the Company’s operating results from the date of acquisition. See Note 6.

Property, Plant and Equipment

Property, plant and equipment are stated at cost. Expenditures for additions to plant facilities, or that extend their useful lives, are capitalized. The cost of minor tools, jigs and dies, and maintenance and repairs is charged to expense as incurred. Depreciation of plant and equipment is calculated principally on a straight-line basis over the estimated useful lives of the related assets. The range of lives for depreciable assets is generally three to ten years for machinery and equipment, five to 27 years for leasehold improvements and 25 to 50 years for buildings.

Goodwill and Other Intangible Assets

Goodwill and other intangible assets with indefinite lives, primarily trademarks and trade names, are not amortized; rather, they are tested for impairment at least annually.

The Company identifies its reporting units at the component level, which is one level below our operating segments. Generally, goodwill arises from acquisitions of specific operating companies and is assigned to the reporting unit in which a particular operating company resides. Our reporting units are composed of business units and are one level below our operating segment and for which discrete financial information is prepared and regularly reviewed by segment management.

The Company principally relies on a discounted cash flow analysis to determine the fair value of each reporting unit, which considers forecasted cash flows discounted at an appropriate discount rate. The Company believes that market participants would use a discounted cash flow analysis to determine the fair value of its reporting units in a sales transaction. The annual goodwill impairment test requires the Company to make a number of assumptions and estimates concerning future levels of revenue growth, operating margins, depreciation, amortization and working capital requirements, which are based upon the Company’s long-range plan. The Company’s long-range plan is updated as part of its annual planning process and is reviewed and approved by management. The discount rate is an estimate of the overall after-tax rate of return required by a market participant whose weighted average cost of capital includes both equity and debt, including a risk premium. While the Company uses the best available information to prepare its cash flow and discount rate assumptions, actual future cash flows or market conditions could differ significantly resulting in future impairment charges related to recorded goodwill balances.

The impairment test for indefinite-lived intangibles other than goodwill (primarily trademarks and trade names) consists of a comparison of the fair value of the indefinite-lived intangible asset to the carrying value of the asset as of the impairment testing date. The Company estimates the fair value of its indefinite-lived intangibles using the relief from royalty method. The fair value derived from the relief from royalty method is measured as the discounted cash flow savings realized from owning such trademarks and trade names and not having to pay a royalty for their use.

 

47


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The Company completed its required annual impairment tests in the fourth quarter of 2012, 2011 and 2010 and determined that the carrying values of goodwill and other intangible assets with indefinite lives were not impaired.

The Company evaluates impairment of its long-lived assets, other than goodwill and indefinite-lived intangible assets when events or changes in circumstances indicate the carrying value may not be recoverable. The carrying value of a long-lived asset group is considered impaired when the total projected undiscounted cash flows from such asset group are separately identifiable and are less than the carrying value. In that event, a loss is recognized based on the amount by which the carrying value exceeds the fair market value of the long-lived asset group. Fair market value is determined primarily using present value techniques based on projected cash flows from the asset group. Losses on long-lived assets held for sale, other than goodwill and indefinite-lived intangible assets, are determined in a similar manner, except that fair market values are reduced for disposal costs.

Intangible assets, other than goodwill, with definite lives are amortized over their estimated useful lives. Patents and technology are being amortized over useful lives of four to 20 years, with a weighted average life of 16 years. Customer relationships are being amortized over a period of five to 20 years, with a weighted average life of 19 years. Miscellaneous other intangible assets are being amortized over a period of three to 20 years. The Company periodically evaluates the reasonableness of the estimated useful lives of these intangible assets.

Financial Instruments and Foreign Currency Translation

Assets and liabilities of foreign operations are translated using exchange rates in effect at the balance sheet date and their results of operations are translated using average exchange rates for the year. Certain transactions of the Company and its subsidiaries are made in currencies other than their functional currency. Exchange gains and losses from those transactions are included in operating results for the year.

The Company makes infrequent use of derivative financial instruments. Forward contracts are entered into from time to time to hedge specific firm commitments for certain inventory purchases, export sales or debt, thereby minimizing the Company’s exposure to raw material commodity price or foreign currency fluctuation. See Note 4.

In instances where transactions are designated as hedges of an underlying item, the gains and losses on those transactions are included in accumulated other comprehensive income (“AOCI”) within stockholders’ equity to the extent they are effective as hedges. The Company has designated certain foreign-currency-denominated long-term borrowings as hedges of the net investment in certain foreign operations. As of December 31, 2012, these net investment hedges included British-pound- and Euro-denominated long-term debt, pertaining to certain of its investments in 100% owned subsidiaries whose functional currency is either the British pound or the Euro. As of December 31, 2011, these net investment hedges included British-pound-denominated long-term debt, pertaining to certain of its investments in 100% owned subsidiaries whose functional currency is the British pound. These borrowings were designed to create net investment hedges in each of the designated foreign subsidiaries. The Company designated the British-pound- and Euro-denominated loans referred to above as hedging instruments to offset translation gains or losses on the net investment due to changes in the British pound and Euro exchange rates. These net investment hedges were evidenced by management’s contemporaneous documentation supporting the hedge designation. Any gain or loss on the hedging instrument (the debt) following hedge designation is reported in AOCI in the same manner as the translation adjustment on the investment based on changes in the spot rate, which is used to measure hedge effectiveness. An evaluation of hedge effectiveness is performed by the Company on an ongoing basis and any changes in the hedge are made as appropriate. See Note 5.

 

48


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Revenue Recognition

The Company recognizes revenue on product sales in the period when the sales process is complete. This generally occurs when products are shipped to the customer in accordance with terms of an agreement of sale, under which title and risk of loss have been transferred, collectability is reasonably assured and pricing is fixed or determinable. For a small percentage of sales where title and risk of loss passes at point of delivery, the Company recognizes revenue upon delivery to the customer, assuming all other criteria for revenue recognition are met. The Company’s policy, with respect to sales returns and allowances, generally provides that the customer may not return products or be given allowances, except at the Company’s option. The Company has agreements with distributors that do not provide expanded rights of return for unsold products. The distributor purchases the product from the Company, at which time title and risk of loss transfers to the distributor. The Company does not offer substantial sales incentives and credits to its distributors other than volume discounts. The Company accounts for these sales incentives as a reduction of revenues when the sale is recognized in the consolidated statement of income. Accruals for sales returns, other allowances and estimated warranty costs are provided at the time revenue is recognized based upon past experience. At December 31, 2012, 2011 and 2010, the accrual for future warranty obligations was $27.8 million, $22.5 million and $18.3 million, respectively. The Company’s expense for warranty obligations was $10.1 million in 2012, $13.2 million in 2011 and $10.6 million in 2010. The warranty periods for products sold vary widely among the Company’s operations, but for the most part do not exceed one year. The Company calculates its warranty expense provision based on past warranty experience and adjustments are made periodically to reflect actual warranty expenses.

Research and Development

Company-funded research and development costs are charged to expense as incurred and were $84.9 million in 2012, $78.0 million in 2011 and $56.8 million in 2010.

Shipping and Handling Costs

Shipping and handling costs are included in cost of sales and were $39.0 million in 2012, $35.9 million in 2011 and $33.3 million in 2010.

Share-Based Compensation

The Company accounts for share-based payments in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification Topic 718, Compensation–Stock Compensation. Accordingly, the Company expenses the fair value of awards made under its share-based plans. That cost is recognized in the consolidated financial statements over the requisite service period of the grants. See Note 11.

Income Taxes

The Company’s annual provision for income taxes and determination of the related balance sheet accounts requires management to assess uncertainties, make judgments regarding outcomes and utilize estimates. The Company conducts a broad range of operations around the world and is therefore subject to complex tax regulations in numerous international taxing jurisdictions, resulting at times in tax audits, disputes and potential litigation, the outcome of which is uncertain. Management must make judgments currently about such uncertainties and determine estimates of the Company’s tax assets and liabilities. To the extent the final outcome differs, future adjustments to the Company’s tax assets and liabilities may be necessary. The Company recognizes interest and penalties accrued related to uncertain tax positions in income tax expense.

 

49


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The Company also is required to assess the realizability of its deferred tax assets, taking into consideration the Company’s forecast of future taxable income, the reversal of other existing temporary differences, available net operating loss carryforwards and available tax planning strategies that could be implemented to realize the deferred tax assets. Based on this assessment, management must evaluate the need for, and amount of, valuation allowances against the Company’s deferred tax assets. To the extent facts and circumstances change in the future, adjustments to the valuation allowances may be required.

Earnings Per Share

The calculation of basic earnings per share is based on the weighted average number of common shares considered outstanding during the periods. The calculation of diluted earnings per share reflects the effect of all potentially dilutive securities (principally outstanding stock options and restricted stock grants). The number of weighted average shares used in the calculation of basic earnings per share and diluted earnings per share was as follows for the years ended December 31:

 

     2012      2011      2010  
     (In thousands)  

Weighted average shares:

        

Basic shares

     241,512         240,383         238,584   

Equity-based compensation plans

     2,474         2,778         2,742   
  

 

 

    

 

 

    

 

 

 

Diluted shares

     243,986         243,161         241,326   
  

 

 

    

 

 

    

 

 

 

 

2.

Stock Split

On May 1, 2012, the Company’s Board of Directors declared a three-for-two split of the Company’s common stock. The stock split resulted in the issuance of one additional share for every two shares owned. The stock split was paid on June 29, 2012, to stockholders of record at the close of business on June 15, 2012. Additionally, the Board of Directors approved a 50% increase in the quarterly cash dividend rate on the Company’s common stock to $0.06 per common share from $0.04 per common share on a post-split basis. All share and per share information included in this report has been retroactively adjusted to reflect the impact of the stock split.

 

3.

Recent Accounting Pronouncements

In May 2011, the FASB issued Accounting Standards Update (“ASU”) No. 2011-04, Amendments to Achieve Common Fair Value Measurement and Disclosure Requirements in U.S. GAAP and IFRSs (“ASU 2011-04”). ASU 2011-04 amendments result in a consistent definition of fair value and common requirements for measurement of and disclosure about fair value between U.S. GAAP and International Financial Reporting Standards (“IFRSs”). ASU 2011-04 was effective on January 1, 2012 for the Company and the adoption did not have a significant impact on the Company’s consolidated results of operations, financial position or cash flows.

In June 2011, the FASB issued ASU No. 2011-05, Presentation of Comprehensive Income (“ASU 2011-05”). ASU 2011-05 requires that all nonowner changes in stockholders’ equity be presented either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In the two-statement approach, the first statement should present total net income and its components followed consecutively by a second statement that should present total other comprehensive income, the components of

 

50


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

other comprehensive income and the total of comprehensive income. For interim periods, issuers are only required to provide a total of comprehensive income. These amendments do not change the items that must be reported in other comprehensive income. The Company adopted ASU 2011-05 effective January 1, 2012. See the Consolidated Statement of Comprehensive Income.

In September 2011, the FASB issued ASU No. 2011-08, Testing Goodwill for Impairment (“ASU 2011-08”). The amendments in ASU 2011-08 permit an entity to first assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount as a basis for determining whether it is necessary to perform the two-step goodwill impairment test described in FASB Accounting Standards Codification Topic 350, Intangibles – Goodwill and Other. ASU 2011-08 was effective on January 1, 2012 for the Company and the adoption did not have a significant impact on the Company’s consolidated results of operations, financial position or cash flows.

In July 2012, the FASB issued ASU No. 2012-02, Testing Indefinite-Lived Intangible Assets for Impairment (“ASU 2012-02”). The amendments in ASU 2012-02, similar to the amendments of ASU 2011-08, permit an entity to first assess qualitative factors to determine whether it is more likely than not that the fair value of an indefinite-lived intangible asset is impaired, as a basis for determining whether it is necessary to perform the quantitative impairment test described in FASB Accounting Standards Codification Topic 350, Intangibles – Goodwill and Other. ASU 2012-02 is effective for annual and interim impairment tests performed for fiscal years beginning after September 15, 2012. The Company does not expect the adoption of ASU 2012-02 to have a significant impact on the Company’s consolidated results of operations, financial position or cash flows.

 

4.

Fair Value Measurement

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date.

The Company utilizes a valuation hierarchy for disclosure of the inputs to the valuations used to measure fair value. This hierarchy prioritizes the inputs into three broad levels as follows. Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities. Level 2 inputs are quoted prices for similar assets and liabilities in active markets or inputs that are observable for the asset or liability, either directly or indirectly through market corroboration, for substantially the full term of the financial instrument. Level 3 inputs are unobservable inputs based on the Company’s own assumptions used to measure assets and liabilities at fair value. A financial asset or liability’s classification within the hierarchy is determined based on the lowest level input that is significant to the fair value measurement.

The following table provides the Company’s assets and liabilities that are measured at fair value on a recurring basis as of December 31, 2012 and 2011, consistent with the fair value hierarchy:

 

     Asset (Liability)  
     December 31, 2012      December 31, 2011  
     Fair Value      Level 1      Level 2      Fair Value      Level 1      Level 2  
     (In thousands)  

Marketable securities

   $       $       $     —       $ 4,563       $ 123       $ 4,440   

Fixed-income investments

     8,316         8,316                 2,811         2,811           

 

51


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The fair value of level 1 marketable securities was based on quoted market prices. The Company held marketable securities in an institutional diversified equity securities mutual fund, which is valued as a level 2 investment. Fair value of the institutional diversified equity securities mutual fund was estimated using the net asset value of the Company’s ownership interests in the fund’s capital. The mutual fund seeks to provide long-term growth of capital by investing primarily in equity securities traded on U.S. exchanges and issued by large, established companies across many business sectors. There were no restrictions on the Company’s ability to redeem these equity securities investments, which were liquidated in 2012. The marketable securities are shown as a component of other current assets on the consolidated balance sheet.

The fair value of fixed-income investments was based on quoted market prices, which are valued as level 1 investments. The fixed-income investments are shown as a component of long-term assets on the consolidated balance sheet.

For the year ended December 31, 2012, gains and losses on the investments noted above were not significant. No transfers between level 1 and level 2 investments occurred during the year ended December 31, 2012.

Financial Instruments

Cash, cash equivalents, marketable securities and fixed-income investments are recorded at fair value at December 31, 2012 and 2011 in the accompanying consolidated balance sheet.

The following table provides the estimated fair values of the Company’s financial instruments, for which fair value is measured for disclosure purposes only, compared to the recorded amounts at December 31, 2012 and 2011:

 

     Asset (Liability)  
     December 31, 2012     December 31, 2011  
     Recorded Amount     Fair Value     Recorded Amount     Fair Value  
     (In thousands)  

Short-term borrowings

   $ (313,473   $ (313,473   $ (135,892   $ (135,892

Long-term debt (including current portion)

     (1,140,302     (1,341,886     (1,128,032     (1,298,503

The fair value of short-term borrowings approximates the carrying value. Short-term borrowings are valued as level 2 investments as they are corroborated by observable market data. The Company’s long-term debt is all privately held with no public market for this debt, therefore, the fair value of long-term debt was computed based on comparable current market data for similar debt instruments and are considered level 3 investments. See Note 10 for long-term debt principals, interest rates and maturities.

Forward Contracts

At December 31, 2012, the Company had a 9.9 million Euro forward contract ($46 thousand fair value unrealized loss at December 31, 2012) outstanding. For the year ended December 31, 2012, realized losses on foreign currency forward contracts were $2.1 million. For the year ended December 31, 2012, unrealized losses on forward contracts were not significant. The Company has not designated its foreign currency forward contracts as hedges. No forward contracts were outstanding at December 31, 2011.

 

52


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

5.

Hedging Activities

The Company has designated certain foreign-currency-denominated long-term borrowings as hedges of the net investment in certain foreign operations. As of December 31, 2012, these net investment hedges included British-pound- and Euro-denominated long-term debt. As of December 31, 2011, these net investment hedges included British-pound-denominated long-term debt. These borrowings were designed to create net investment hedges in each of the designated foreign subsidiaries. The Company designated the British-pound- and Euro-denominated loans referred to above as hedging instruments to offset translation gains or losses on the net investment due to changes in the British pound and Euro exchange rates. These net investment hedges were evidenced by management’s contemporaneous documentation supporting the hedge designation. Any gain or loss on the hedging instrument (the debt) following hedge designation is reported in accumulated other comprehensive income in the same manner as the translation adjustment on the investment based on changes in the spot rate, which is used to measure hedge effectiveness.

At December 31, 2012 and 2011, the Company had $195.0 million and $186.5 million, respectively, of British-pound-denominated loans, which were designated as a hedge against the net investment in British pound functional currency foreign subsidiaries. At December 31, 2012, the Company had a $66.0 million Euro-denominated loan, which was designated as a hedge against the net investment in Euro functional currency foreign subsidiaries. As a result of these British-pound- and Euro-denominated loans being designated and 100% effective as net investment hedges, $8.3 million of currency remeasurement losses and $0.7 million of currency remeasurement gains have been included in the foreign currency translation component of other comprehensive income at December 31, 2012 and 2011, respectively.

 

6.

Acquisitions

In 2012, the Company spent $747.7 million in cash, net of cash acquired, to acquire O’Brien Corporation in January, the parent company of Dunkermotoren GmbH in May, Micro-Poise Measurement Systems (“Micro-Poise”) in October and Aero Components International (“ACI”), Avtech Avionics and Instruments (“Avtech”), Sunpower, Inc. and Crystal Engineering in December. O’Brien is a leading manufacturer of fluid and gas handling solutions, sample conditioning equipment and process analyzers. Dunkermotoren is a leader in advanced motion control solutions for a wide range of industrial automation applications. Micro-Poise is a leading provider of integrated test and measurement solutions for the tire industry. ACI repairs and overhauls fuel, hydraulic, pneumatic, power generation and heat exchanger components. Avtech’s expertise is in the repair and maintenance of next generation and legacy avionics and instruments. Sunpower designs and develops high reliability cryocoolers and externally heated Stirling cycle engines. Crystal Engineering manufactures high-end, portable pressure calibrators and digital test gauges for the oil and gas, power generation and other industrial markets. O’Brien, Micro-Poise, Sunpower and Crystal Engineering are part of AMETEK’s Electronic Instruments Group (“EIG”) and Dunkermotoren, ACI and Avtech are part of AMETEK’s Electromechanical Group (“EMG”).

 

53


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The following table represents the preliminary allocation of the aggregate purchase price for the net assets of the above acquisitions based on the estimated fair value at acquisition (in millions):

 

Property, plant and equipment

   $ 52.3   

Goodwill

     384.7   

Other intangible assets

     366.5   

Deferred income taxes

     (102.9

Net working capital and other*

     47.1   
  

 

 

 

Total purchase price

   $ 747.7   
  

 

 

 

 

*

Includes $61.1 million in accounts receivable, whose fair value, contractual cash flows and expected cash flows are approximately equal.

The amount allocated to goodwill is reflective of the benefits the Company expects to realize from the acquisitions as follows: O’Brien’s product lines are both highly differentiated and highly complementary to AMETEK’s process instruments businesses. Combined with the Company’s analytical instrument solutions, AMETEK now can offer its customers a complete solution for most of their process analysis needs. Dunkermotoren is a strategic and highly complementary fit with AMETEK’s Precision Motion Control business. Dunkermotoren expands the Company’s leadership position in niche rotary and linear motion applications. Micro-Poise has a large installed equipment base at many of the world’s leading tire manufacturers and is the only industry supplier of all key test and measurement techniques with products that offer best-in-class accuracy, repeatability and cycle times. Micro-Poise broadens the Company’s position in the materials test and measurement equipment market and makes AMETEK a leader in a growing industry segment. ACI expands the Company’s global maintenance, repair and overhaul (“MRO”) capabilities into fuel system repair. Avtech broadens the Company’s MRO expertise in next generation avionics. Sunpower’s cryogenic cooling technology provides a critical enabling technology for use in the Company’s ORTEC Detective® family of portable radiation identifiers and provides a platform to support the continued growth of this product family while providing the Company with opportunities to broaden the application of cryogenic cooling and Stirling heat engine technology. Crystal Engineering strengthens the Company’s technology and product offering in the calibration instruments market. Crystal Engineering’s products broaden the AMETEK’s line of high-end temperature and pressure calibration instruments. The Company expects approximately $151.5 million of the goodwill recorded in connection with the 2012 acquisitions will be tax deductible in future years.

The Company is in the process of finalizing the measurement of certain intangible assets for all 2012 acquisitions, except for the Dunkermotoren and O’Brien acquisitions, as well as deferred taxes associated with its 2012 acquisitions.

At December 31, 2012, purchase price allocated to other intangible assets of $366.5 million consists of $96.6 million of indefinite-lived intangible trademarks and trade names, which are not subject to amortization. The remaining $269.9 million of other intangible assets consist of $233.0 million of customer relationships, which are being amortized over a period of three to 20 years, $35.2 million of purchased technology, which is being amortized over a period of 15 to 20 years and $1.7 million of other intangibles, which are being amortized over a period of three to ten years. Amortization expense for each of the next five years for the 2012 acquisitions listed above is expected to approximate $15.3 million per year.

 

54


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The 2012 acquisitions noted above had an immaterial impact on reported net sales, net income and diluted earnings per share for the year ended December 31, 2012. Had the 2012 acquisitions been made at the beginning of 2012, unaudited pro forma net sales, net income and diluted earnings per share for the year ended December 31, 2012 would not have been materially different than the amounts reported. Had the 2012 acquisitions been made at the beginning of 2011, unaudited pro forma net sales, net income and diluted earnings per share for the year ended December 31, 2011 would have been $3,415.6 million, $396.3 million and $1.63, respectively. Pro forma results are not necessarily indicative of the results that would have occurred if the acquisitions had been completed at the beginning of 2012 or 2011.

In 2011, the Company spent $474.9 million in cash, net of cash acquired, to acquire Avicenna Technology, Inc. (“Avicenna”) in April, Coining Holding Company (“Coining”) in May, Reichert Technologies and EM Test (Switzerland) GmbH in October and Technical Manufacturing Corporation (“TMC”) in December. Avicenna is a supplier of custom, fine-featured components used in the medical device industry. Coining is a leading supplier of custom-shaped metal preforms, microstampings and bonding wire solutions for interconnect applications in microelectronics packaging and assembly. Reichert Technologies is a manufacturer of analytical instruments and diagnostic devices for the eye care market. EM Test is a manufacturer of advanced monitoring, testing, calibrating and display instruments. TMC is a world leader in high-performance vibration isolation systems and optical test benches used to isolate highly sensitive instruments for the microelectronics, life sciences, photonics and ultra-precision manufacturing industries. Reichert Technologies, EM Test and TMC are part of EIG and Avicenna and Coining are part of EMG.

In 2010, the Company spent $538.6 million in cash, net of cash acquired, to acquire Technical Services for Electronics (“TSE”) in June, Haydon Enterprises in July, Atlas Material Testing Technology LLC (“Atlas”) in November, as well as the small acquisitions of Sterling Ultra Precision in January, Imago Scientific Instruments in April and American Reliance’s Power Division in August. TSE is a manufacturer of engineered interconnect solutions for the medical device industry. Haydon Enterprises is a leader in linear actuators and lead screw assemblies for the medical, industrial equipment, aerospace, analytical instrument, computer peripheral and semiconductor industries. Atlas is the world’s leading provider of weathering test instruments and related testing and consulting services. Atlas is part of EIG and TSE and Haydon Enterprises are part of EMG.

 

55


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

7.

Goodwill and Other Intangible Assets

The changes in the carrying amounts of goodwill by segment were as follows:

 

     EIG     EMG     Total  
     (In millions)  

Balance at December 31, 2010

   $ 864.4      $ 709.2      $ 1,573.6   

Goodwill acquired

     135.7        102.4        238.1   

Purchase price allocation adjustments and other

     3.7        (2.0     1.7   

Foreign currency translation adjustments

     (6.1     (1.1     (7.2
  

 

 

   

 

 

   

 

 

 

Balance at December 31, 2011

     997.7        808.5        1,806.2   

Goodwill acquired

     211.1        173.6        384.7   

Purchase price allocation adjustments and other

     (2.2     1.3        (0.9

Foreign currency translation adjustments

     8.4        9.8        18.2   
  

 

 

   

 

 

   

 

 

 

Balance at December 31, 2012

   $ 1,215.0      $ 993.2      $ 2,208.2   
  

 

 

   

 

 

   

 

 

 

Other intangible assets were as follows at December 31:

 

     2012     2011  
     (In thousands)  

Definite-lived intangible assets (subject to amortization):

    

Patents

   $ 54,289      $ 53,048   

Purchased technology

     163,192        124,773   

Customer lists

     897,072        657,152   

Other acquired intangibles

     25,948        24,865   
  

 

 

   

 

 

 
     1,140,501        859,838   
  

 

 

   

 

 

 

Accumulated amortization:

    

Patents

     (32,990     (30,913

Purchased technology

     (41,323     (33,819

Customer lists

     (139,840     (97,832

Other acquired intangibles

     (23,730     (22,057
  

 

 

   

 

 

 
     (237,883     (184,621
  

 

 

   

 

 

 

Net intangible assets subject to amortization

     902,618        675,217   

Indefinite-lived intangible assets (not subject to amortization):

    

Trademarks and trade names

     407,109        307,740   
  

 

 

   

 

 

 
   $ 1,309,727      $ 982,957   
  

 

 

   

 

 

 

Amortization expense was $51.8 million, $37.6 million and $27.5 million for the years ended December 31, 2012, 2011 and 2010, respectively. Amortization expense for each of the next five years is expected to approximate $59.3 million per year, not considering the impact of potential future acquisitions.

 

56


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

8.

Other Consolidated Balance Sheet Information

 

     December 31,  
     2012     2011  
     (In thousands)  

INVENTORIES

    

Finished goods and parts

   $ 62,723      $ 70,315   

Work in process

     83,522        72,676   

Raw materials and purchased parts

     282,690        237,480   
  

 

 

   

 

 

 
   $ 428,935      $ 380,471   
  

 

 

   

 

 

 

PROPERTY, PLANT AND EQUIPMENT

    

Land

   $ 34,144      $ 32,172   

Buildings

     234,524        211,060   

Machinery and equipment

     711,215        679,446   
  

 

 

   

 

 

 
     979,883        922,678   

Less: Accumulated depreciation

     (596,400     (597,349
  

 

 

   

 

 

 
   $ 383,483      $ 325,329   
  

 

 

   

 

 

 

ACCRUED LIABILITIES

    

Employee compensation and benefits

   $ 82,303      $ 75,051   

Severance and lease termination

     11,671        11,614   

Product warranty obligation

     27,792        22,466   

Other

     75,768        72,041   
  

 

 

   

 

 

 
   $ 197,534      $ 181,172   
  

 

 

   

 

 

 

 

     2012     2011     2010  
     (In thousands)  

ALLOWANCES FOR POSSIBLE LOSSES ON ACCOUNTS AND NOTES RECEIVABLE

      

Balance at the beginning of the year

   $ 7,840      $ 6,047      $ 5,788   

Additions charged to expense

     3,569        2,458        1,466   

Recoveries credited to allowance

     33        11        120   

Write-offs

     (813     (585     (1,036

Currency translation adjustments and other

     125        (91     (291
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

   $ 10,754      $ 7,840      $ 6,047   
  

 

 

   

 

 

   

 

 

 

 

57


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

9.

Income Taxes

The components of income before income taxes and the details of the provision for income taxes were as follows for the years ended December 31:

 

     2012     2011     2010  
     (In thousands)  

Income before income taxes:

      

Domestic

   $ 438,742      $ 366,654      $ 266,783   

Foreign

     223,733        189,988        139,467   
  

 

 

   

 

 

   

 

 

 

Total

   $ 662,475      $ 556,642      $ 406,250   
  

 

 

   

 

 

   

 

 

 

Provision for income taxes:

      

Current:

      

Federal

   $ 135,598      $ 103,598      $ 70,008   

Foreign

     50,511        39,516        37,514   

State

     18,415        16,910        11,022   
  

 

 

   

 

 

   

 

 

 

Total current

     204,524        160,024        118,544   
  

 

 

   

 

 

   

 

 

 

Deferred:

      

Federal

     6,038        14,051        7,071   

Foreign

     (6,598     (2,508     (3,105

State

     (621     611        (192
  

 

 

   

 

 

   

 

 

 

Total deferred

     (1,181     12,154        3,774   
  

 

 

   

 

 

   

 

 

 

Total provision

   $ 203,343      $ 172,178      $ 122,318   
  

 

 

   

 

 

   

 

 

 

 

58


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Significant components of the deferred tax (asset) liability were as follows at December 31:

 

     2012     2011  
     (In thousands)  

Current deferred tax (asset) liability:

  

Reserves not currently deductible

   $ (24,559   $ (20,874

Share-based compensation

     (4,091     (4,234

Net operating loss carryforwards

     (2,763     (2,264

Other

     (1,888     (1,896
  

 

 

   

 

 

 

Net current deferred tax asset

   $ (33,301   $ (29,268
  

 

 

   

 

 

 

Noncurrent deferred tax (asset) liability:

    

Differences in basis of property and accelerated depreciation

   $ 38,187      $ 27,329   

Reserves not currently deductible

     (23,010     (22,822

Pensions

     (869     8,720   

Differences in basis of intangible assets and accelerated amortization

     482,632        376,986   

Net operating loss carryforwards

     (5,463     (1,241

Share-based compensation

     (7,725     (8,548

Foreign tax credit carryforwards

     (190     (331

Other

     (1,737     8,581   
  

 

 

   

 

 

 
     481,825        388,674   

Less: Valuation allowance

     1,027        414   
  

 

 

   

 

 

 

Net noncurrent deferred tax liability

     482,852        389,088   
  

 

 

   

 

 

 

Net deferred tax liability

   $ 449,551      $ 359,820   
  

 

 

   

 

 

 

The Company’s effective tax rate reconciles to the U.S. Federal statutory rate as follows for the years ended December 31:

 

         2012             2011             2010      

U.S. Federal statutory rate

     35.0     35.0     35.0

State income taxes, net of federal income tax benefit

     1.8        2.0        1.9   

Foreign operations, net

     (5.1     (4.9     (3.4

U.S. Manufacturing deduction

     (2.0     (1.8     (1.9

Other

     1.0        0.6        (1.5
  

 

 

   

 

 

   

 

 

 

Consolidated effective tax rate

     30.7     30.9     30.1
  

 

 

   

 

 

   

 

 

 

On January 2, 2013, the President of the United States of America signed legislation that retroactively extended the research and development (“R&D”) tax credit for two years, from January 1, 2012 through December 31, 2013. The Company expects its income tax expense for the first quarter of 2013 will reflect the entire benefit of the R&D tax credit attributable to 2012 and the first quarter of 2013.

 

59


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

At December 31, 2012 and 2011, there has been no provision for U.S. deferred income taxes for the undistributed earnings of certain non-U.S. subsidiaries, which total approximately $665.5 million and $410.3 million at December 31, 2012 and 2011, respectively, because the Company intends to reinvest these earnings indefinitely in operations outside the United States. Upon distribution of those earnings to the United States, the Company would be subject to U.S. income taxes and withholding taxes payable to the various foreign countries. Determination of the amount of the unrecognized deferred income tax liability on these undistributed earnings is not practicable.

At December 31, 2012, the Company had tax benefits of $8.2 million related to net operating loss carryforwards, which will be available to offset future income taxes payable, subject to certain annual or other limitations based on foreign and U.S. tax laws. This amount includes net operating loss carryforwards of $2.7 million for federal income tax purposes with no valuation allowance, $3.4 million for state income tax purposes with no valuation allowance and $2.1 million for foreign income tax purposes with a valuation allowance of $0.2 million. These net operating loss carryforwards, if not used, will expire between 2013 and 2033. As of December 31, 2012, the Company had $0.2 million of U.S. foreign tax credit carryforwards.

The Company maintains a valuation allowance to reduce certain deferred tax assets to amounts that are more likely than not to be realized. This allowance primarily relates to the deferred tax assets established for state tax credits and net operating loss carryforwards. In 2012, the Company recorded an increase of $0.6 million in the valuation allowance primarily related to excess capital losses from a recent acquisition that are not expected to be utilized.

At December 31, 2012, the Company had gross unrecognized tax benefits of $36.2 million, of which $33.6 million, if recognized, would impact the effective tax rate. At December 31, 2011, the Company had gross unrecognized tax benefits of $28.5 million, of which $25.9 million, if recognized, would impact the effective tax rate.

At December 31, 2012 and 2011, the Company reported $8.2 million and $7.2 million, respectively, related to interest and penalty exposure as accrued income tax expense in the consolidated balance sheet. During 2012, 2011 and 2010, the Company recognized expense of $1.0 million, $1.1 million and $1.9 million, respectively, for interest and penalties related to uncertain tax positions in the consolidated statement of income as a component of income tax expense.

The most significant tax jurisdiction for the Company is the United States. The Company files income tax returns in various state and foreign tax jurisdictions, in some cases for multiple legal entities per jurisdiction. Generally, the Company has open tax years subject to tax audit on average of between three and six years in these jurisdictions. At December 31, 2012, the Internal Revenue Service (“IRS”) has been and is continuing to examine the Company’s U.S. income tax returns for the years 2006 through 2009. The IRS previously completed the examination of the Company’s U.S. income tax returns for the years 2006 and 2007, however, the periods were reopened by the Company for a limited scope examination of the R&D credit. The Company has not materially extended any other statutes of limitation for any significant location and has reviewed and accrued for, where necessary, tax liabilities for open periods including state and foreign jurisdictions that remain subject to examination. There have been no penalties asserted or imposed by the IRS related to substantial understatement of income, gross valuation misstatement or failure to disclose a listed or reportable transaction.

During 2012, the Company added $11.5 million of tax, interest and penalties for identified uncertain tax positions and reversed $2.9 million of tax and interest related to statute expirations and settlement of prior uncertain positions. During 2011, the Company added $9.6 million of tax, interest and penalties related for identified uncertain tax positions and reversed $2.9 million of tax and interest related to statute expirations and settlement of prior uncertain positions.

 

60


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The following is a reconciliation of the liability for uncertain tax positions at December 31:

 

     2012     2011     2010  
     (In millions)  

Balance at the beginning of the year

   $ 28.5      $ 22.8      $ 26.5   

Additions for tax positions related to the current year

     4.3        1.4        1.2   

Additions for tax positions of prior years

     6.0        6.5        2.7   

Reductions for tax positions of prior years

     (0.8     (2.0     (3.5

Reductions related to settlements with taxing authorities

                   (4.1

Reductions due to statute expirations

     (1.8     (0.2       
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

   $ 36.2      $ 28.5      $ 22.8   
  

 

 

   

 

 

   

 

 

 

In 2012, the additions above primarily reflect the increase in tax liabilities for uncertain tax positions related to certain foreign activities, while the reductions above primarily relate to statue expirations and tax paid. At December 31, 2012, tax, interest and penalties of $34.9 million were classified as a noncurrent liability. The net increase in uncertain tax positions for the year ended December 31, 2012 resulted in an increase to income tax expense of $8.9 million. At December 31, 2012, the Company classified $9.5 million of tax, interest and penalties on uncertain tax positions as a current liability as it is reasonably possible that certain tax audits and tax rulings will be substantially settled within the next 12 months.

 

10.

Debt

Long-term debt consisted of the following at December 31:

 

     2012     2011  
     (In thousands)  

U.S. dollar 6.59% senior notes due September 2015

   $ 90,000      $ 90,000   

U.S. dollar 6.69% senior notes due December 2015

     35,000        35,000   

U.S. dollar 6.20% senior notes due December 2017

     270,000        270,000   

U.S. dollar 6.35% senior notes due July 2018

     80,000        80,000   

U.S. dollar 7.08% senior notes due September 2018

     160,000        160,000   

U.S. dollar 7.18% senior notes due December 2018

     65,000        65,000   

U.S. dollar 6.30% senior notes due December 2019

     100,000        100,000   

British pound 5.99% senior note due November 2016

     64,988        62,170   

British pound 4.68% senior note due September 2020

     129,976        124,339   

Euro 3.94% senior note due August 2015

     65,972        64,800   

Swiss franc 2.44% senior note due December 2021

     60,096        58,686   

Revolving credit loan

     312,903        134,200   

Other, principally foreign

     19,840        19,729   
  

 

 

   

 

 

 

Total debt

     1,453,775        1,263,924   

Less: Current portion

     (320,654     (140,508
  

 

 

   

 

 

 

Total long-term debt

   $ 1,133,121      $ 1,123,416   
  

 

 

   

 

 

 

 

61


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Maturities of long-term debt outstanding at December 31, 2012 were as follows: $1.8 million in 2014; $192.4 million in 2015; $67.2 million in 2016; $271.9 million in 2017; $309.7 million in 2018; and $290.1 million in 2019 and thereafter.

In December 2007, the Company issued $270 million in aggregate principal amount of 6.20% private placement senior notes due December 2017 and $100 million in aggregate principal amount of 6.30% private placement senior notes due December 2019. In July 2008, the Company issued $80 million in aggregate principal amount of 6.35% private placement senior notes due July 2018. In September 2008, the Company issued $90 million in aggregate principal amount of 6.59% private placement senior notes due September 2015 and $160 million in aggregate principal amount of 7.08% private placement senior notes due September 2018. In December 2008, the Company issued $35 million in aggregate principal amount of 6.69% private placement senior notes due December 2015 and $65 million in aggregate principal amount of 7.18% private placement senior notes due December 2018.

In September 2005, the Company issued a 50 million Euro ($66.0 million at December 31, 2012) 3.94% senior note due August 2015. In November 2004, the Company issued a 40 million British pound ($65.0 million at December 31, 2012) 5.99% senior note due November 2016. In September 2010, the Company issued an 80 million British pound ($130.0 million at December 31, 2012) 4.68% senior note due September 2020. In December 2011, the Company issued a 55 million Swiss franc ($60.1 million at December 31, 2012) 2.44% senior note due December 2021.

In September 2011, the Company completed a new five-year revolving credit facility with a total borrowing capacity of $700 million, which excludes an accordion feature that permits the Company to request up to an additional $200 million in revolving credit commitments at any time during the life of the revolving credit agreement under certain conditions. The revolving credit facility places certain restrictions on allowable additional indebtedness. The new revolving credit facility replaced a $450 million total borrowing capacity revolving credit facility, which excluded a $100 million accordion feature, that was due to expire in June 2012. At December 31, 2012, the Company had available borrowing capacity of $557.6 million under its revolving credit facility, including the $200 million accordion feature.

Interest rates on outstanding loans under either the current or replaced revolving credit facility are at the applicable London Interbank Offered Rate plus a negotiated spread, or at the U.S. prime rate. At December 31, 2012 and 2011 the Company had $312.9 million (including a $21.9 million eligible foreign subsidiary borrowing) and $134.2 million, respectively, of borrowings outstanding under the revolving credit facility. The weighted average interest rate on the revolving credit facility for the years ended December 31, 2012 and 2011 was 1.50% and 1.10%, respectively. The Company had outstanding letters of credit totaling $37.0 million and $25.9 million at December 31, 2012 and 2011, respectively.

The private placements, the senior notes and the revolving credit facility are subject to certain customary covenants, including financial covenants that, among other things, require the Company to maintain certain debt-to-EBITDA and interest coverage ratios. The Company was in compliance with all provisions of the debt arrangements at December 31, 2012.

Foreign subsidiaries of the Company had available credit facilities with local foreign lenders of $56.2 million at December 31, 2012. Foreign subsidiaries had debt outstanding at December 31, 2012 totaling $19.8 million, including $12.1 million reported in long-term debt.

The weighted average interest rate on total debt outstanding at December 31, 2012 and 2011 was 5.4% and 6.0%, respectively.

 

62


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

11.

Share-Based Compensation

Under the terms of the Company’s stockholder-approved share-based plans, incentive and non-qualified stock options and restricted stock have been, and may be, issued to the Company’s officers, management-level employees and members of its Board of Directors. Employee and non-employee director stock options generally vest at a rate of 25% per year, beginning one year from the date of the grant, and restricted stock generally has a four-year cliff vesting. Stock options generally have a maximum contractual term of seven years. At December 31, 2012, 20.1 million shares of Company common stock were reserved for issuance under the Company’s share-based plans, including 6.8 million shares for stock options outstanding.

The Company issues previously unissued shares when stock options are exercised and shares are issued from treasury stock upon the award of restricted stock.

The Company measures and records compensation expense related to all stock awards by recognizing the grant date fair value of the awards over their requisite service periods in the financial statements. For grants under any of the Company’s plans that are subject to graded vesting over a service period, the Company recognizes expense on a straight-line basis over the requisite service period for the entire award.

The fair value of each stock option grant is estimated on the date of grant using a Black-Scholes-Merton option pricing model. The following weighted average assumptions were used in the Black-Scholes-Merton model to estimate the fair values of options granted during the years indicated:

 

     2012     2011     2010  

Expected volatility

     28.4     26.4     25.6

Expected term (years)

     5.1        5.0        5.0   

Risk-free interest rate

     0.84     1.96     2.48

Expected dividend yield

     0.47     0.54     0.54

Black-Scholes-Merton fair value per stock option granted

   $ 8.54      $ 7.56      $ 5.04   

Expected volatility is based on the historical volatility of the Company’s stock. The Company used historical exercise data to estimate the stock options’ expected term, which represents the period of time that the stock options granted are expected to be outstanding. Management anticipates that the future stock option holding periods will be similar to the historical stock option holding periods. The risk-free interest rate for periods within the contractual life of the stock option is based on the U.S. Treasury yield curve at the time of grant. Compensation expense recognized for all share-based awards is net of estimated forfeitures. The Company’s estimated forfeiture rates are based on its historical experience.

Total share-based compensation expense was as follows for the years ended December 31:

 

     2012     2011     2010  
     (In thousands)  

Stock option expense

   $ 9,437      $ 8,027      $ 7,580   

Restricted stock expense

     9,947        14,120        9,016   
  

 

 

   

 

 

   

 

 

 

Total pre-tax expense

     19,384        22,147        16,596   

Related tax benefit

     (6,518     (7,083     (5,459
  

 

 

   

 

 

   

 

 

 

Reduction of net income

   $ 12,866      $ 15,064      $ 11,137   
  

 

 

   

 

 

   

 

 

 

 

63


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Pre-tax share-based compensation expense is included in either cost of sales, or selling, general and administrative expenses, depending on where the recipient’s cash compensation is reported.

The following is a summary of the Company’s stock option activity and related information for the year ended December 31, 2012:

 

     Shares     Weighted
Average
Exercise

Price
     Weighted
Average
Remaining
Contractual

Life
     Aggregate
Intrinsic

Value
 
     (In thousands)            (Years)      (In millions)  

Outstanding at the beginning of the year

     8,198      $ 18.50         

Granted

     1,386        34.01         

Exercised

     (2,628     16.34         

Forfeited

     (111     23.61         

Expired

     (5     19.38         
  

 

 

         

Outstanding at the end of the year

     6,840      $ 22.39         4.1       $ 103.8   
  

 

 

   

 

 

    

 

 

    

 

 

 

Exercisable at the end of the year

     3,565      $ 18.81         3.1       $ 66.9   
  

 

 

   

 

 

    

 

 

    

 

 

 

The aggregate intrinsic value of stock options exercised during 2012, 2011 and 2010 was $45.5 million, $28.2 million and $29.3 million, respectively. The total fair value of stock options vested during 2012, 2011 and 2010 was $8.9 million, $7.5 million and $7.0 million, respectively.

The following is a summary of the Company’s nonvested stock option activity and related information for the year ended December 31, 2012:

 

     Shares     Weighted
Average
Grant  Date

Fair Value
 
     (In thousands)        

Nonvested stock options outstanding at the beginning of the year

     3,810      $ 5.09   

Granted

     1,386        8.54   

Vested

     (1,810     4.92   

Forfeited

     (111     5.94   
  

 

 

   

Nonvested stock options outstanding at the end of the year

     3,275      $ 6.62   
  

 

 

   

 

 

 

As of December 31, 2012, there was approximately $14.1 million of expected future pre-tax compensation expense related to the 3.3 million nonvested stock options outstanding, which is expected to be recognized over a weighted average period of less than two years.

The fair value of restricted shares under the Company’s restricted stock arrangement is determined by the product of the number of shares granted and the grant date market price of the Company’s common stock. Upon the grant of restricted stock, the fair value of the restricted shares (unearned compensation) at the date of grant is charged as a reduction of capital in excess of par value in the Company’s consolidated balance sheet and is amortized to expense on a straight-line basis over the vesting period, which is the same as the calculated derived service period as determined on the grant date.

 

64


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Restricted stock grants are subject to accelerated vesting due to certain events, including doubling of the grant price of the Company’s common stock as of the close of business during any five consecutive trading days. On April 6, 2011, 764,563 shares of restricted stock, which were granted on April 23, 2009, vested under this accelerated vesting provision. The pre-tax charge to income due to the accelerated vesting of these shares was $5.2 million ($3.6 million net after-tax charge) for the year ended December 31, 2011.

Subsequent Event

On January 25, 2013, 488,235 shares of restricted stock, which were granted on April 29, 2010, and 26,298 shares of restricted stock, which were granted on July 29, 2010, vested under the accelerated vesting provision described above. The pre-tax charge to income due to the accelerated vesting of these shares will be $2.7 million ($1.9 million net after-tax charge) for the three months ending March 31, 2013.

The following is a summary of the Company’s nonvested restricted stock activity and related information for the year ended December 31, 2012:

 

     Shares     Weighted
Average
Grant  Date

Fair Value
 
     (In thousands)        

Nonvested restricted stock outstanding at the beginning of the year

     1,414      $ 22.71   

Granted

     403        33.80   

Vested

     (524     21.40   

Forfeited

     (41     26.11   
  

 

 

   

Nonvested restricted stock outstanding at the end of the year

     1,252      $ 26.71   
  

 

 

   

 

 

 

The total fair value of the restricted stock that vested was $11.1 million, $18.6 million and $5.7 million in 2012, 2011 and 2010, respectively. The weighted average fair value of restricted stock granted per share during 2012 and 2011 was $33.80 and $29.61, respectively. As of December 31, 2012, there was approximately $19.9 million of expected future pre-tax compensation expense related to the 1.3 million nonvested restricted shares outstanding, which is expected to be recognized over a weighted average period of approximately two years.

Under a Supplemental Executive Retirement Plan (“SERP”) in 2012, the Company reserved 33,434 shares of common stock. Reductions for retirements and terminations were 91,815 shares in 2012. The total number of shares of common stock reserved under the SERP was 609,850 as of December 31, 2012. Charges to expense under the SERP are not significant in amount and are considered pension expense with the offsetting credit reflected in capital in excess of par value.

 

65


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

12. Retirement Plans and Other Postretirement Benefits

Retirement and Pension Plans

The Company sponsors several retirement and pension plans covering eligible salaried and hourly employees. The plans generally provide benefits based on participants’ years of service and/or compensation. The following is a brief description of the Company’s retirement and pension plans.

The Company maintains contributory and noncontributory defined benefit pension plans. Benefits for eligible salaried and hourly employees under all defined benefit plans are funded through trusts established in conjunction with the plans. The Company’s funding policy with respect to its defined benefit plans is to contribute amounts that provide for benefits based on actuarial calculations and the applicable requirements of U.S. federal and local foreign laws. The Company estimates that it will make both required and discretionary cash contributions of approximately $2 million to $5 million to its worldwide defined benefit pension plans in 2013.

The Company uses a measurement date of December 31 (its fiscal year end) for its U.S. and foreign defined benefit pension plans.

The Company sponsors a 401(k) retirement and savings plan for eligible U.S. employees. Participants in the retirement and savings plan may contribute a specified portion of their compensation on a pre-tax basis, which vary by location. The Company matches employee contributions ranging from 20% to 100%, up to a maximum percentage ranging from 1% to 8% of eligible compensation or up to a maximum of $1,200 per participant in some locations.

The Company’s retirement and savings plan has a defined contribution retirement feature principally to cover U.S. salaried employees joining the Company after December 31, 1996. Under the retirement feature, the Company makes contributions for eligible employees based on a pre-established percentage of the covered employee’s salary subject to pre-established vesting. Employees of certain of the Company’s foreign operations participate in various local defined contribution plans.

The Company has nonqualified unfunded retirement plans for its Directors and certain retired employees. It also provides supplemental retirement benefits, through contractual arrangements and/or a SERP covering certain current and former executives of the Company. These supplemental benefits are designed to compensate the executive for retirement benefits that would have been provided under the Company’s primary retirement plan, except for statutory limitations on compensation that must be taken into account under those plans. The projected benefit obligations of the SERP and the contracts will primarily be funded by a grant of shares of the Company’s common stock upon retirement or termination of the executive. The Company is providing for these obligations by charges to earnings over the applicable periods.

 

66


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The following tables set forth the changes in net projected benefit obligation and the fair value of plan assets for the funded and unfunded defined benefit plans for the years ended December 31:

U.S. Defined Benefit Pension Plans:

 

     2012     2011  
     (In thousands)  

Change in projected benefit obligation:

    

Net projected benefit obligation at the beginning of the year

   $ 418,932      $ 384,763   

Service cost

     3,383        3,095   

Interest cost

     20,718        21,271   

Actuarial losses

     56,410        34,765   

Gross benefits paid

     (25,687     (24,962

Plan amendments

     135          
  

 

 

   

 

 

 

Net projected benefit obligation at the end of the year

   $ 473,891      $ 418,932   
  

 

 

   

 

 

 

Change in plan assets:

    

Fair value of plan assets at the beginning of the year

   $ 441,715      $ 465,903   

Actual return on plan assets

     60,065        527   

Employer contributions

     372        247   

Gross benefits paid

     (25,687     (24,962
  

 

 

   

 

 

 

Fair value of plan assets at the end of the year

   $ 476,465      $ 441,715   
  

 

 

   

 

 

 

 

67


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Foreign Defined Benefit Pension Plans:

 

     2012     2011  
     (In thousands)  

Change in projected benefit obligation:

    

Net projected benefit obligation at the beginning of the year

   $ 128,410      $ 126,334   

Service cost

     1,818        1,267   

Interest cost

     6,902        7,244   

Acquisitions

     13,947          

Foreign currency translation adjustment

     6,495        (863

Employee contributions

     384        403   

Actuarial losses (gains)

     19,353        (1,869

Gross benefits paid

     (5,049     (4,106

Plan amendments

     (2,080       
  

 

 

   

 

 

 

Net projected benefit obligation at the end of the year

   $ 170,180      $ 128,410   
  

 

 

   

 

 

 

Change in plan assets:

    

Fair value of plan assets at the beginning of the year

   $ 125,105      $ 126,539   

Actual return on plan assets

     13,148        (2,347

Employer contributions

     3,920        5,139   

Employee contributions

     384        403   

Foreign currency translation adjustment

     5,890        (523

Gross benefits paid

     (5,049     (4,106
  

 

 

   

 

 

 

Fair value of plan assets at the end of the year

   $ 143,398      $ 125,105   
  

 

 

   

 

 

 

The accumulated benefit obligation consisted of the following at December 31:

U.S. Defined Benefit Pension Plans:

 

     2012      2011  
     (In thousands)  

Funded plans

   $ 455,112       $ 402,306   

Unfunded plans

     6,087         5,558   
  

 

 

    

 

 

 

Total

   $ 461,199       $ 407,864   
  

 

 

    

 

 

 

Foreign Defined Benefit Pension Plans:

 

     2012      2011  
     (In thousands)  

Funded plans

   $ 132,274       $ 112,540   

Unfunded plans

     26,041         7,339   
  

 

 

    

 

 

 

Total

   $ 158,315       $ 119,879   
  

 

 

    

 

 

 

 

68


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Weighted average assumptions used to determine benefit obligations at December 31:

 

         2012             2011      

U.S. Defined Benefit Pension Plans:

    

Discount rate

     4.10     5.00

Rate of compensation increase (where applicable)

     3.75     3.75

Foreign Defined Benefit Pension Plans:

  

Discount rate

     4.44     5.22

Rate of compensation increase (where applicable)

     2.89     2.97

The following is a summary of the fair value of plan assets for U.S. plans at December 31, 2012 and 2011. Certain reclassifications of prior year amounts have been made to conform to the current year presentation.

 

     December 31, 2012      December 31, 2011  

Asset Class

   Total      Level 1      Level 2      Total      Level 1      Level 2  
     (In thousands)  

Cash and temporary investments

   $ 3,587       $       $ 3,587       $ 2,402       $       $ 2,402   

Equity securities:

                 

AMETEK common stock

     26,645         26,645                 26,368         26,368           

U.S. Small cap common stocks

     29,124         29,124                 26,033         26,033           

U.S. Large cap common stocks

     81,215         53,856         27,359         62,567         40,281         22,286   

Diversified common stocks – U.S.

                             41,467                 41,467   

Diversified common stocks – Global

     82,810                 82,810         60,430                 60,430   

Fixed-income securities and other:

  

U.S. Corporate

     24,040         8,751         15,289         24,856         9,184         15,672   

U.S. Government

     2,521         1,545         976         5,126         4,126         1,000   

Global asset allocation*

     152,026         88,749         63,277         121,296         70,855         50,441   

Inflation related funds

     53,954         12,084         41,870         52,438         12,438         40,000   

Alternative investments:

  

Collective trust

     20,543                         18,732                   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total investments

   $ 476,465       $ 220,754       $ 235,168       $ 441,715       $ 189,285       $ 233,698   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

*

This asset class was invested in diversified companies in all geographical regions.

U.S. equity securities and global equity securities categorized as level 1 are traded on national and international exchanges and are valued at their closing prices on the last trading day of the year. For U.S. equity securities and global equity securities not traded on an active exchange, or if the closing price is not available, the trustee obtains indicative quotes from a pricing vendor, broker or investment manager. These securities are categorized as level 2 if the custodian obtains corroborated quotes from a pricing vendor.

Additionally, some U.S. equity securities and global equity securities are public investment vehicles valued using the Net Asset Value (“NAV”) provided by the fund manager. The NAV is the total value of the fund divided by the number of shares outstanding. U.S. equity securities and global equity securities are categorized as level 1 if traded at their NAV on a nationally recognized securities exchange or categorized as level 2 if the NAV is corroborated by observable market data.

 

69


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Fixed income securities categorized as level 1 are traded on national and international exchanges and are valued at their closing prices on the last trading day of the year and categorized as level 2 if valued by the trustee using pricing models that use verifiable observable market data, bids provided by brokers or dealers or quoted prices of securities with similar characteristics.

Alternative investments categorized as level 3 are valued based on unobservable inputs and cannot be corroborated using verifiable observable market data.

The following is a summary of the changes in the fair value of the U.S. plans’ level 3 investments (fair value using significant unobservable inputs):

 

     Alternative
Investments
 
     (In thousands)  

Balance, December 31, 2010

   $   

Actual return on assets:

  

Unrealized gains relating to instruments still held at the end of the year

     807   

Realized gains (losses) relating to assets sold during the year

       

Purchases, sales, issuances and settlements, net

     17,925   
  

 

 

 

Balance, December 31, 2011

     18,732   
  

 

 

 

Actual return on assets:

  

Unrealized gains relating to instruments still held at the end of the year

     1,811   

Realized gains (losses) relating to assets sold during the year

       

Purchases, sales, issuances and settlements, net

       
  

 

 

 

Balance, December 31, 2012

   $ 20,543   
  

 

 

 

The expected long-term rate of return on these plan assets was 8.00% in 2012 and 2011, respectively. Equity securities included 706,950 shares of AMETEK, Inc. common stock with a market value of $26.6 million (5.6% of total plan investment assets) at December 31, 2012 and 939,486 shares of AMETEK, Inc. common stock with a market value of $26.4 million (6.0% of total plan investment assets) at December 31, 2011.

The objectives of the AMETEK, Inc. U.S. defined benefit plans’ investment strategy are to maximize the plans’ funded status and minimize Company contributions and plan expense. Because the goal is to optimize returns over the long term, an investment policy that favors equity holdings has been established. Since there may be periods of time where both equity and fixed-income markets provide poor returns, an allocation to alternative assets may be made to improve the overall portfolio’s diversification and return potential. The Company periodically reviews its asset allocation, taking into consideration plan liabilities, plan benefit payment streams and the investment strategy of the pension plans. The actual asset allocation is monitored frequently relative to the established targets and ranges and is rebalanced when necessary. The target allocations for the U.S. defined benefits plans are approximately 45% equity securities, 15% fixed-income securities and 40% other securities and/or cash.

The equity portfolio is diversified by market capitalization and style. The equity portfolio also includes an international component.

 

70


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The objective of the fixed-income portion of the pension assets is to provide interest rate sensitivity for a portion of the assets and to provide diversification. The fixed-income portfolio is diversified within certain quality and maturity guidelines in an attempt to minimize the adverse effects of interest rate fluctuations.

Other than for investments in alternative assets, described in the footnote to the table above, certain investments are prohibited. Prohibited investments include venture capital, private placements, unregistered or restricted stock, margin trading, commodities, short selling and rights and warrants. Foreign currency futures, options and forward contracts may be used to manage foreign currency exposure.

The following is a summary of the fair value of plan assets for foreign defined benefit pension plans at December 31, 2012 and 2011.

 

     December 31, 2012      December 31, 2011  

Asset Class

   Total      Level 2      Total      Level 2  
     (In thousands)  

Cash

   $ 5,733       $ 5,733       $ 4,920       $ 4,920   

U.S. Mutual equity funds

     11,738         11,738         10,224         10,224   

Foreign mutual equity funds

     83,437         83,437         72,221         72,221   

Real estate

     2,841         2,841         404         404   

Mutual bond funds – Global

     24,537         24,537         21,481         21,481   

Life insurance

     15,112                 15,855           
  

 

 

    

 

 

    

 

 

    

 

 

 

Total investments

   $ 143,398       $ 128,286       $ 125,105       $ 109,250   
  

 

 

    

 

 

    

 

 

    

 

 

 

Equity funds, real estate funds and fixed income funds that are valued by the vendor using observable market inputs are considered level 2 investments. Life insurance assets are considered level 3 investments as their values are determined by the sponsor using unobservable market data.

The following is a summary of the changes in the fair value of the foreign plans’ level 3 investments (fair value determined using significant unobservable inputs):

 

     Life Insurance  
     (In thousands)  

Balance, December 31, 2010

   $ 13,373   

Actual return on assets:

  

Unrealized gains relating to instruments still held at the end of the year

     2,482   

Realized gains (losses) relating to assets sold during the year

       

Acquisitions

       

Purchases, sales, issuances and settlements, net

       
  

 

 

 

Balance, December 31, 2011

     15,855   
  

 

 

 

Actual return on assets:

  

Unrealized (losses) relating to instruments still held at the end of the year

     (743

Realized gains (losses) relating to assets sold during the year

       

Acquisitions

       

Purchases, sales, issuances and settlements, net

       
  

 

 

 

Balance, December 31, 2012

   $ 15,112   
  

 

 

 

 

71


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The objective of AMETEK, Inc.’s foreign defined benefit plans’ investment strategy is to maximize the long-term rate of return on plan investments, subject to a reasonable level of risk. Liability studies are also performed on a regular basis to provide guidance in setting investment goals with an objective to balance risks against the current and future needs of the plans. The trustees consider the risk associated with the different asset classes, relative to the plans’ liabilities and how this can be affected by diversification, and the relative returns available on equities, fixed-income investments, real estate and cash. Also, the likely volatility of those returns and the cash flow requirements of the plans are considered. It is expected that equities will outperform fixed-income investments over the long term. However, the trustees recognize the fact that fixed-income investments may better match the liabilities for pensioners. Because of the relatively young active employee group covered by the plans and the immature nature of the plans, the trustees have chosen to adopt an asset allocation strategy more heavily weighted toward equity investments. This asset allocation strategy will be reviewed, from time to time, in view of changes in market conditions and in the plans’ liability profile. The target allocations for the foreign defined benefit plans are approximately 68% equity securities, 16% fixed-income securities and 16% other securities, insurance or cash.

The assumption for the expected return on plan assets was developed based on a review of historical investment returns for the investment categories for the defined benefit pension assets. This review also considered current capital market conditions and projected future investment returns. The estimates of future capital market returns by asset class are lower than the actual long-term historical returns. The current low interest rate environment influences this outlook. Therefore, the assumed rate of return for U.S. plans is 7.75% and 6.91% for foreign plans in 2013.

The projected benefit obligation, accumulated benefit obligation and fair value of plan assets for pension plans with a projected benefit obligation in excess of plan assets and pension plans with an accumulated benefit obligation in excess of plan assets were as follows at December 31:

U.S. Defined Benefit Pension Plans:

 

     Projected Benefit
Obligation Exceeds
Fair Value of Assets
     Accumulated Benefit
Obligation Exceeds
Fair Value of Assets
 
     2012      2011      2012      2011  
     (In thousands)  

Benefit obligation

   $ 21,390       $ 5,558       $ 21,390       $ 5,558   

Fair value of plan assets

     14,134                 14,134           

Foreign Defined Benefit Pension Plans:

 

     Projected Benefit
Obligation Exceeds
Fair Value of Assets
     Accumulated Benefit
Obligation Exceeds
Fair Value of Assets
 
     2012      2011      2012      2011  
     (In thousands)  

Benefit obligation

   $ 93,457       $ 61,580       $ 84,156       $ 7,871   

Fair value of plan assets

     56,908         50,125         54,325         467   

 

72


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The following table provides the amounts recognized in the consolidated balance sheet at December 31:

 

     2012     2011  
     (In thousands)  

Funded status asset (liability):

  

Fair value of plan assets

   $ 619,863      $ 566,820   

Projected benefit obligation

     (644,071     (547,342
  

 

 

   

 

 

 

Funded status at the end of the year

   $ (24,208   $ 19,478   
  

 

 

   

 

 

 

Amounts recognized in the consolidated balance sheet consisted of:

  

Noncurrent asset for pension benefits (other assets)

   $ 19,596      $ 36,490   

Current liabilities for pension benefits

     (1,925     (563

Noncurrent liability for pension benefits

     (41,879     (16,449
  

 

 

   

 

 

 

Net amount recognized at the end of the year

   $ (24,208   $ 19,478   
  

 

 

   

 

 

 

The following table provides the amounts recognized in accumulated other comprehensive income, net of taxes, at December 31:

 

Net amounts recognized:

   2012     2011  
     (In thousands)  

Net actuarial loss

   $ 121,330      $ 98,345   

Prior service costs

     (1,501     93   

Transition asset

     9        (5
  

 

 

   

 

 

 

Total recognized

   $ 119,838      $ 98,433   
  

 

 

   

 

 

 

 

Other changes in pension plan assets and benefit obligations

recognized in other comprehensive income, net of taxes:

   2012     2011     2010  
     (In thousands)  

Net actuarial loss (gain)

   $ 30,509      $ 50,582      $ (10,871

Amortization of net actuarial loss

     (7,563     (2,914     (4,306

Loss recognized due to curtailment

                   (993

Amortization of prior service costs

     (1,555     (46     (149

Amortization of transition asset

     14        13        (4
  

 

 

   

 

 

   

 

 

 

Total recognized

   $ 21,405      $ 47,635      $ (16,323
  

 

 

   

 

 

   

 

 

 

 

73


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The following table provides the components of net periodic pension benefit expense for the years ended December 31:

 

     2012     2011     2010  
     (In thousands)  

Defined benefit plans:

      

Service cost

   $ 5,201      $ 4,362      $ 3,921   

Interest cost

     27,620        28,515        27,874   

Expected return on plan assets

     (42,758     (45,049     (41,991

Amortization of:

      

Net actuarial loss

     12,161        4,727        6,949   

Prior service costs

     60        75        83   

Transition asset

     (22     (22     (21
  

 

 

   

 

 

   

 

 

 

Pension expense (income)

     2,262        (7,392     (3,185

Pension curtailment charge

                   41   
  

 

 

   

 

 

   

 

 

 

Total net periodic benefit expense (income)

     2,262        (7,392     (3,144
  

 

 

   

 

 

   

 

 

 

Other plans:

      

Defined contribution plans

     17,754        14,571        12,505   

Foreign plans and other

     4,936        5,586        4,442   
  

 

 

   

 

 

   

 

 

 

Total other plans

     22,690        20,157        16,947   
  

 

 

   

 

 

   

 

 

 

Total net pension expense

   $ 24,952      $ 12,765      $ 13,803   
  

 

 

   

 

 

   

 

 

 

The estimated amount that will be amortized from accumulated other comprehensive income into net periodic pension benefit expense in 2013 for the net actuarial losses and prior service costs is expected to be $13.7 million.

The following weighted average assumptions were used to determine the above net periodic pension benefit expense for the years ended December 31:

 

         2012             2011             2010      

U.S. Defined Benefit Pension Plans:

      

Discount rate

     5.00     5.60     5.90

Expected return on plan assets

     8.00     8.00     8.25

Rate of compensation increase (where applicable)

     3.75     3.75     3.75

Foreign Defined Benefit Pension Plans:

      

Discount rate

     5.22     5.71     5.98

Expected return on plan assets

     6.96     6.96     6.97

Rate of compensation increase (where applicable)

     2.97     2.97     2.98

 

74


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Estimated Future Benefit Payments

The estimated future benefit payments for U.S. and foreign plans are as follows: 2013 - $31.9 million; 2014 - $32.5 million; 2015 - $32.7 million; 2016 - $33.5 million; 2017 - $34.6 million; 2018 to 2022 - $185.7 million. Future benefit payments primarily represent amounts to be paid from pension trust assets. Amounts included that are to be paid from the Company’s assets are not significant in any individual year.

Postretirement Plans and Postemployment Benefits

The Company provides limited postretirement benefits other than pensions for certain retirees and a small number of former employees. Benefits under these arrangements are not funded and are not significant.

The Company also provides limited postemployment benefits for certain former or inactive employees after employment but before retirement. Those benefits are not significant in amount.

The Company has a deferred compensation plan, which allows employees whose compensation exceeds the statutory IRS limit for retirement benefits to defer a portion of earned bonus compensation. The plan permits deferred amounts to be deemed invested in either, or a combination of, (a) an interest-bearing account, benefits from which are payable out of the general assets of the Company, or (b) the equivalent of a fund which invests in shares of the Company’s common stock on behalf of the employee. The amount deferred under the plan, including income earned, was $20.6 million and $19.5 million at December 31, 2012 and 2011, respectively. Administrative expense for the deferred compensation plan is borne by the Company and is not significant.

 

13.

Guarantees

The Company does not provide significant guarantees on a routine basis. The Company primarily issues guarantees, stand-by letters of credit and surety bonds in the ordinary course of its business to provide financial or performance assurance to third parties on behalf of its consolidated subsidiaries to support or enhance the subsidiary’s stand-alone creditworthiness. The amounts subject to certain of these agreements vary depending on the covered contracts actually outstanding at any particular point in time. At December 31, 2012, the maximum amount of future payment obligations relative to these various guarantees was $75.5 million and the outstanding liability under certain of those guarantees was $6.2 million.

Indemnifications

In conjunction with certain acquisition and divestiture transactions, the Company may agree to make payments to compensate or indemnify other parties for possible future unfavorable financial consequences resulting from specified events (e.g., breaches of contract obligations or retention of previously existing environmental, tax or employee liabilities) whose terms range in duration and often are not explicitly defined. Where appropriate, the obligation for such indemnifications is recorded as a liability. Because the amount of these types of indemnifications generally is not specifically stated, the overall maximum amount of the obligation under such indemnifications cannot be reasonably estimated. Further, the Company indemnifies its directors and officers for claims against them in connection with their positions with the Company. Historically, any such costs incurred to settle claims related to these indemnifications have been minimal for the Company. The Company believes that future payments, if any, under all existing indemnification agreements would not have a material impact on its consolidated results of operations, financial position or cash flows.

 

75


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Product Warranties

The Company provides limited warranties in connection with the sale of its products. The warranty periods for products sold vary widely among the Company’s operations, but for the most part do not exceed one year. The Company calculates its warranty expense provision based on past warranty experience and adjustments are made periodically to reflect actual warranty expenses.

Changes in the accrued product warranty obligation were as follows at December 31:

 

     2012     2011     2010  
     (In thousands)  

Balance at the beginning of the year

   $ 22,466      $ 18,347      $ 16,035   

Accruals for warranties issued during the year

     10,089        13,247        10,616   

Settlements made during the year

     (10,602     (10,175     (9,691

Changes in liability for pre-existing warranties, including expirations during the year

                   (262

Warranty accruals related to acquired businesses and other during the year

     5,839        1,047        1,649   
  

 

 

   

 

 

   

 

 

 

Balance at the end of the year

   $ 27,792      $ 22,466      $ 18,347   
  

 

 

   

 

 

   

 

 

 

Certain settlements of warranties made during the period were for specific nonrecurring warranty obligations. Product warranty obligations are reported as current liabilities in the consolidated balance sheet.

 

14.

Contingencies

Asbestos Litigation

The Company (including its subsidiaries) has been named as a defendant, along with many other companies, in a number of asbestos-related lawsuits. Many of these lawsuits either relate to businesses which were acquired by the Company and do not involve products which were manufactured or sold by the Company or relate to previously owned businesses of the Company which are under new ownership. In connection with many of these lawsuits, the sellers or new owners of such businesses, as the case may be, have agreed to indemnify the Company against these claims (the “Indemnified Claims”). The Indemnified Claims have been tendered to, and are being defended by, such sellers and new owners. These sellers and new owners have met their obligations, in all respects, and the Company does not have any reason to believe such parties would fail to fulfill their obligations in the future; however, one of these companies filed for bankruptcy liquidation in 2007. To date, no judgments have been rendered against the Company as a result of any asbestos-related lawsuit. The Company believes it has strong defenses to the claims being asserted and intends to continue to vigorously defend itself in these matters.

Environmental Matters

Certain historic processes in the manufacture of products have resulted in environmentally hazardous waste by-products as defined by federal and state laws and regulations. At December 31, 2012, the Company is named a Potentially Responsible Party (“PRP”) at 14 non-AMETEK-owned former waste disposal or treatment sites (the “non-owned” sites). The Company is identified as a “de minimis” party in 13 of these sites based on the low volume of waste attributed to the Company relative to the amounts attributed to other named PRPs. In nine of

 

76


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

these sites, the Company has reached a tentative agreement on the cost of the de minimis settlement to satisfy its obligation and is awaiting executed agreements. The tentatively agreed-to settlement amounts are fully reserved. In the other four sites, the Company is continuing to investigate the accuracy of the alleged volume attributed to the Company as estimated by the parties primarily responsible for remedial activity at the sites to establish an appropriate settlement amount. At the remaining site where the Company is a non-de minimis PRP, the Company is participating in the investigation and/or related required remediation as part of a PRP Group and reserves have been established sufficient to satisfy the Company’s expected obligations. The Company historically has resolved these issues within established reserve levels and reasonably expects this result will continue. In addition to these non-owned sites, the Company has an ongoing practice of providing reserves for probable remediation activities at certain of its current or previously owned manufacturing locations (the “owned” sites). For claims and proceedings against the Company with respect to other environmental matters, reserves are established once the Company has determined that a loss is probable and estimable. This estimate is refined as the Company moves through the various stages of investigation, risk assessment, feasibility study and corrective action processes. In certain instances, the Company has developed a range of estimates for such costs and has recorded a liability based on the low end of the range. It is reasonably possible that the actual cost of remediation of the individual sites could vary from the current estimates and the amounts accrued in the consolidated financial statements; however, the amounts of such variances are not expected to result in a material change to the consolidated financial statements. In estimating the Company’s liability for remediation, the Company also considers the likely proportionate share of the anticipated remediation expense and the ability of the other PRPs to fulfill their obligations.

Total environmental reserves at December 31, 2012 and 2011 were $23.6 million and $28.0 million, respectively, for both non-owned and owned sites. In 2012, the Company recorded $0.7 million in reserves. Additionally, the Company spent $5.1 million on environmental matters in 2012. The Company’s reserves for environmental liabilities at December 31, 2012 and 2011 include reserves of $14.7 million and $17.5 million, respectively, for an owned site acquired in connection with the 2005 acquisition of HCC Industries (“HCC”). The Company is the designated performing party for the performance of remedial activities for one of several operating units making up a Superfund site in the San Gabriel Valley of California. The Company has obtained indemnifications and other financial assurances from the former owners of HCC related to the costs of the required remedial activities. At December 31, 2012, the Company had $11.3 million in receivables related to HCC for probable recoveries from third-party escrow funds and other committed third-party funds to support the required remediation. Also, the Company is indemnified by HCC’s former owners for approximately $19.0 million of additional costs.

The Company has agreements with other former owners of certain of its acquired businesses, as well as new owners of previously owned businesses. Under certain of the agreements, the former or new owners retained, or assumed and agreed to indemnify the Company against, certain environmental and other liabilities under certain circumstances. The Company and some of these other parties also carry insurance coverage for some environmental matters. To date, these parties have met their obligations in all material respects.

The Company believes it has established reserves which are sufficient to perform all known responsibilities under existing claims and consent orders. The Company has no reason to believe that other third parties would fail to perform their obligations in the future. In the opinion of management, based upon presently available information and past experience related to such matters, an adequate provision for probable costs has been made and the ultimate cost resulting from these actions is not expected to materially affect the consolidated results of operations, financial position or cash flows of the Company.

 

77


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

15.

Leases and Other Commitments

Minimum aggregate rental commitments under noncancellable leases in effect at December 31, 2012 (principally for production and administrative facilities and equipment) amounted to $165.9 million, consisting of payments of $31.4 million in 2013, $25.9 million in 2014, $21.2 million in 2015, $17.4 million in 2016, $12.3 million in 2017 and $57.7 million thereafter. The leases expire over a range of years from 2013 to 2082, with renewal or purchase options, subject to various terms and conditions, contained in most of the leases. Rental expense was $28.0 million in 2012, $26.4 million in 2011 and $23.1 million in 2010.

As of December 31, 2012 and 2011, the Company had $325.6 million and $275.5 million, respectively, in purchase obligations outstanding, which primarily consisted of contractual commitments to purchase certain inventories at fixed prices.

 

16.

Reportable Segments and Geographic Areas Information

Descriptive Information about Reportable Segments

The Company has two reportable segments, EIG and EMG. The Company identifies its operating segments for segment reporting purposes primarily on the basis of product type, production processes, distribution methods and management organizations.

EIG produces instrumentation for various electronic applications used in transportation industries, including aircraft cockpit instruments and displays, airborne electronics systems that monitor and record flight and engine data, and pressure, temperature, flow and liquid-level sensors for commercial airlines and aircraft and jet engine manufacturers. EIG also produces analytical instrumentation for the medical, laboratory and research markets, as well as instruments for food service equipment, measurement and monitoring instrumentation for various process industries and instruments and complete instrument panels for heavy trucks, and heavy construction and agricultural vehicles. EIG also manufactures ultraprecise measurement instrumentation, as well as thermoplastic compounds for automotive, appliance and telecommunications applications.

EMG produces brushless air-moving motors for aerospace, mass transit, medical equipment, computer and business machine applications. EMG also produces high-purity metal powders and alloys in powder, strip and wire form for electronic components, aircraft and automotive products, as well as heat exchangers and thermal management subsystems. EMG also supplies hermetically sealed (moisture-proof) connectors, terminals and headers. These electromechanical devices are used in aerospace, defense, medical and other industrial applications. Additionally, EMG produces air-moving electric motors and motor-blower systems for manufacturers of floorcare appliances and outdoor power equipment.

Measurement of Segment Results

Segment operating income represents net sales less all direct costs and expenses (including certain administrative and other expenses) applicable to each segment, but does not include interest expense. Net sales by segment are reported after elimination of intra- and intersegment sales and profits, which are insignificant in amount. Reported segment assets include allocations directly related to the segment’s operations. Corporate assets consist primarily of investments, prepaid pensions, insurance deposits and deferred taxes.

 

78


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Reportable Segment Financial Information

 

     2012     2011     2010  
     (In thousands)  

Net sales(1):

    

Electronic Instruments

   $ 1,872,557      $ 1,647,195      $ 1,324,113   

Electromechanical

     1,461,656        1,342,719        1,146,839   
  

 

 

   

 

 

   

 

 

 

Consolidated net sales

   $ 3,334,213      $ 2,989,914      $ 2,470,952   
  

 

 

   

 

 

   

 

 

 

Operating income and income before income taxes:

    

Segment operating income(2):

    

Electronic Instruments

   $ 497,116      $ 420,197      $ 316,184   

Electromechanical

     292,205        262,710        210,397   
  

 

 

   

 

 

   

 

 

 

Total segment operating income

     789,321        682,907        526,581   

Corporate administrative and other expenses

     (43,449     (46,966     (44,423
  

 

 

   

 

 

   

 

 

 

Consolidated operating income

     745,872        635,941        482,158   

Interest and other expenses, net

     (83,397     (79,299     (75,908
  

 

 

   

 

 

   

 

 

 

Consolidated income before income taxes

   $ 662,475      $ 556,642      $ 406,250   
  

 

 

   

 

 

   

 

 

 

Assets:

    

Electronic Instruments

   $ 2,616,609      $ 2,154,502     

Electromechanical

     2,405,673        1,965,665     
  

 

 

   

 

 

   

Total segment assets

     5,022,282        4,120,167     

Corporate

     167,774        199,323     
  

 

 

   

 

 

   

Consolidated assets

   $ 5,190,056      $ 4,319,490     
  

 

 

   

 

 

   

Additions to property, plant and equipment(3):

    

Electronic Instruments

   $ 39,400      $ 27,196      $ 31,496   

Electromechanical

     67,935        30,977        26,690   
  

 

 

   

 

 

   

 

 

 

Total segment additions to property, plant and equipment

     107,335        58,173        58,186   

Corporate

     1,840        2,419        3,240   
  

 

 

   

 

 

   

 

 

 

Consolidated additions to property, plant and equipment

   $ 109,175      $ 60,592      $ 61,426   
  

 

 

   

 

 

   

 

 

 

Depreciation and amortization:

    

Electronic Instruments

   $ 50,473      $ 39,749      $ 32,893   

Electromechanical

     54,406        46,143        38,524   
  

 

 

   

 

 

   

 

 

 

Total segment depreciation and amortization

     104,879        85,892        71,417   

Corporate

     592        640        1,479   
  

 

 

   

 

 

   

 

 

 

Consolidated depreciation and amortization

   $ 105,471      $ 86,532      $ 72,896   
  

 

 

   

 

 

   

 

 

 

 

(1)

After elimination of intra- and intersegment sales, which are not significant in amount.

(2)

Segment operating income represents net sales less all direct costs and expenses (including certain administrative and other expenses) applicable to each segment, but does not include interest expense.

(3)

Includes $51.7 million in 2012, $9.8 million in 2011 and $22.2 million in 2010 from acquired businesses.

 

79


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Geographic Areas

Information about the Company’s operations in different geographic areas for the years ended December 31, 2012, 2011 and 2010 is shown below. Net sales were attributed to geographic areas based on the location of the customer. Accordingly, U.S. export sales are reported in international sales.

 

     2012      2011      2010  
     (In thousands)  

Net sales:

        

United States

   $ 1,626,577       $ 1,488,773       $ 1,259,608   
  

 

 

    

 

 

    

 

 

 

International(1):

        

United Kingdom

     189,704         174,714         174,980   

European Union countries

     526,193         456,035         362,463   

Asia

     620,456         546,542         405,200   

Other foreign countries

     371,283         323,850         268,701   
  

 

 

    

 

 

    

 

 

 

Total international

     1,707,636         1,501,141         1,211,344   
  

 

 

    

 

 

    

 

 

 

Total consolidated

   $ 3,334,213       $ 2,989,914       $ 2,470,952   
  

 

 

    

 

 

    

 

 

 

Long-lived assets from continuing operations (excluding intangible assets):

        

United States

   $ 203,438       $ 215,987      
  

 

 

    

 

 

    

International(2):

        

United Kingdom

     50,830         34,093      

European Union countries

     83,488         52,832      

Asia

     19,060         8,496      

Other foreign countries

     26,667         13,921      
  

 

 

    

 

 

    

Total international

     180,045         109,342      
  

 

 

    

 

 

    

Total consolidated

   $ 383,483       $ 325,329      
  

 

 

    

 

 

    

 

(1)

Includes U.S. export sales of $862.6 million in 2012, $774.9 million in 2011 and $564.5 million in 2010.

 

(2)

Represents long-lived assets of foreign-based operations only.

 

17.

Additional Consolidated Income Statement and Cash Flow Information

Included in other income are interest and other investment income of $1.6 million, $0.8 million and $1.1 million for 2012, 2011 and 2010, respectively. Income taxes paid in 2012, 2011 and 2010 were $171.2 million, $130.1 million and $95.9 million, respectively. Cash paid for interest was $75.0 million, $68.2 million and $66.8 million in 2012, 2011 and 2010, respectively.

 

80


Table of Contents

AMETEK, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

18.

Stockholders’ Equity

In 2011, the Company repurchased approximately 2,516,000 shares of common stock for $59.3 million in cash under its share repurchase authorization. In November 2011, the Board of Directors approved an increase of $100 million in the authorization for the repurchase of the Company’s common stock. At December 31, 2011, $105.5 million was available under the Board authorization for future share repurchases. In 2012, the Company repurchased approximately 141,000 shares of common stock for $4.6 million in cash under its share repurchase authorization. At December 31, 2012, $100.9 million was available under the Board authorization for future share repurchases.

At December 31, 2012, the Company held 13.1 million shares in its treasury at a cost of $211.4 million, compared with 13.3 million shares at a cost of $209.8 million at December 31, 2011. The number of shares outstanding at December 31, 2012 was 243.4 million shares, compared with 240.6 million shares at December 31, 2011.

The Company has a Shareholder Rights Plan, under which the Company’s Board of Directors declared a dividend of one Right for each share of Company common stock owned at the close of business on June 2, 2007, and has authorized the issuance of one Right for each share of common stock of the Company issued between the Record Date and the Distribution Date. The Plan provides, under certain conditions involving acquisition of the Company’s common stock, that holders of Rights, except for the acquiring entity, would be entitled (i) to purchase shares of preferred stock at a specified exercise price, or (ii) to purchase shares of common stock of the Company, or the acquiring company, having a value of twice the Rights exercise price. The Rights under the Plan expire in June 2017.

 

19.

Quarterly Financial Data (Unaudited)

 

     First
Quarter
     Second
Quarter
     Third
Quarter
     Fourth
Quarter
     Total Year  
     (In thousands, except per share amounts)  

2012

              

Net sales

   $ 827,152       $ 825,898       $ 839,373       $ 841,790       $ 3,334,213   

Operating income

   $ 182,776       $ 184,978       $ 188,164       $ 189,954       $ 745,872   

Net income

   $ 110,150       $ 113,687       $ 115,397       $ 119,898       $ 459,132   

Basic earnings per share*

   $ 0.46       $ 0.47       $ 0.48       $ 0.49       $ 1.90   

Diluted earnings per share*

   $ 0.45       $ 0.47       $ 0.47       $ 0.49       $ 1.88   

Dividends paid per share*

   $ 0.04       $ 0.06       $ 0.06       $ 0.06       $ 0.22   

2011

              

Net sales

   $ 717,783       $ 758,834       $ 750,546       $ 762,751       $ 2,989,914   

Operating income

   $ 152,020       $ 156,955       $ 159,586       $ 167,380       $ 635,941   

Net income

   $ 90,435       $ 94,144       $ 97,978       $ 101,907       $ 384,464   

Basic earnings per share*

   $ 0.38       $ 0.39       $ 0.41       $ 0.42       $ 1.60   

Diluted earnings per share*

   $ 0.37       $ 0.39       $ 0.40       $ 0.42       $ 1.58   

Dividends paid per share*

   $ 0.04       $ 0.04       $ 0.04       $ 0.04       $ 0.16   

 

 

*

The sum of quarterly earnings per share may not equal total year earnings per share due to rounding of earnings per share amounts, and differences in weighted average shares and equivalent shares outstanding for each of the periods presented.

 

81


Table of Contents
Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

None.

 

Item 9A. Controls and Procedures

Disclosure Controls and Procedures

The Company maintains a system of disclosure controls and procedures that is designed to provide reasonable assurance that information, which is required to be disclosed, is accumulated and communicated to management in a timely manner. Under the supervision and with the participation of our management, including the Company’s principal executive officer and principal financial officer, we have evaluated the effectiveness of our system of disclosure controls and procedures as required by Exchange Act Rule 13a-15(b) as of December 31, 2012. Based on that evaluation, the Company’s principal executive officer and principal financial officer concluded that the Company’s disclosure controls and procedures are effective at the reasonable assurance level.

Such evaluation did not identify any change in the Company’s internal control over financial reporting during the year ended December 31, 2012 that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

Internal Control over Financial Reporting

Management’s report on the Company’s internal controls over financial reporting is included in Part II, Item 8 of this Annual Report on Form 10-K. The report of the independent registered public accounting firm with respect to the effectiveness of internal control over financial reporting is included in Part II, Item 8 of this Annual Report on Form 10-K.

 

Item 9B. Other Information

None.

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance

 

  a)

Directors of the Registrant.

Information with respect to Directors of the Company is set forth under the heading “Election of Directors” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders and is incorporated herein by reference.

 

  b)

Executive Officers of the Registrant.

Information with respect to executive officers of the Company is set forth under the heading “Executive Officers” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders and is incorporated herein by reference.

 

  c)

Section 16(a) Compliance.

Information concerning compliance with Section 16(a) of the Securities Exchange Act of 1934 is set forth under the heading “Compliance with Section 16(a) of the Securities Exchange Act of 1934” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders and is incorporated herein by reference.

 

82


Table of Contents
  d)

Identification of the Audit Committee.

Information concerning the audit committee of the Company is set forth under the heading “Committees of the Board” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders and is incorporated herein by reference.

 

  e)

Audit Committee Financial Expert.

Information concerning the audit committee financial expert of the Company is set forth under the heading “Committees of the Board” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders and is incorporated herein by reference.

 

  f)

Corporate Governance/Nominating Committee.

Information concerning any material changes to the way in which security holders may recommend nominees to the Company’s Board of Directors is set forth under the heading “Corporate Governance” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders and is incorporated herein by reference.

 

  g)

Code of Ethics for Chief Executive Officer and Senior Financial Officers.

The Company has adopted a Code of Ethics for the principal executive officer, principal financial officer and principal accounting officer, which may be found on the Company’s website at www.ametek.com. Any amendments to the Code of Ethics or any grant of a waiver from the provisions of the Code of Ethics requiring disclosure under applicable Securities and Exchange Commission rules will be disclosed on the Company’s website.

 

Item 11. Executive Compensation

Information regarding executive compensation, including the “Compensation Discussion and Analysis,” the “Report of the Compensation Committee,” “Compensation Tables” and “Potential Payments Upon Termination or Change of Control” is set forth under the heading “Executive Compensation” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders and is incorporated herein by reference.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Information regarding security ownership of certain beneficial owners and management appearing under “Stock Ownership of Executive Officers and Directors” and “Beneficial Ownership of Principal Stockholders” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders is incorporated herein by reference.

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

Information appearing under “Certain Relationships and Related Transactions” and “Independence” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders is incorporated herein by reference.

 

Item 14. Principal Accounting Fees and Services

Information appearing under “Ratification of Appointment of Independent Registered Public Accounting Firm” in the Company’s Proxy Statement for the 2013 Annual Meeting of Stockholders is incorporated herein by reference.

 

83


Table of Contents

PART IV

 

Item 15. Exhibits and Financial Statement Schedules

Financial Statements and Financial Statement Schedules

(1) Financial Statements:

Financial statements are shown in the Index to Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.

(2) Financial Statement Schedules:

Financial statement schedules have been omitted because either they are not applicable or the required information is included in the financial statements or the notes thereto.

(3) Exhibits:

Exhibits are shown in the index included in Part II, Item 15(3) of this Annual Report on Form 10-K.

 

84


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

AMETEK, Inc.
By:   /s/    FRANK S. HERMANCE        
  Frank S. Hermance, Chairman of the Board, Chief Executive Officer and Director

Date: February 21, 2013

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

Signature

  

Title

 

Date

/s/    FRANK S. HERMANCE        

Frank S. Hermance

  

Chairman of the Board, Chief Executive
Officer and Director

(Principal Executive Officer)

  February 21, 2013

/s/    ROBERT R. MANDOS, JR.        

Robert R. Mandos, Jr.

  

Executive Vice President —

Chief Financial Officer

(Principal Financial Officer)

  February 21, 2013

/s/    WILLIAM J. BURKE        

William J. Burke

  

Senior Vice President —

Comptroller & Treasurer

(Principal Accounting Officer)

  February 21, 2013

/s/    ANTHONY J. CONTI        

Anthony J. Conti

   Director   February 21, 2013

/s/    CHARLES D. KLEIN        

Charles D. Klein

   Director   February 21, 2013

/s/    STEVEN W. KOHLHAGEN        

Steven W. Kohlhagen

   Director   February 21, 2013

/s/    JAMES R. MALONE        

James R. Malone

   Director   February 21, 2013

/s/    ELIZABETH R. VARET        

Elizabeth R. Varet

   Director   February 21, 2013

/s/    DENNIS K. WILLIAMS        

Dennis K. Williams

   Director   February 21, 2013

 

85


Table of Contents

Index to Exhibits

Item 15(3)

 

Exhibit

Number

 

Description

  

Incorporated Herein by Reference to

3.1   Amended and Restated Certificate of Incorporation of AMETEK, Inc., dated April 24, 2007.    Exhibit 3.1 to Form 10-Q dated March 31, 2007, SEC File No. 1-12981.
3.2   By-Laws of AMETEK, Inc. as amended to and including April 29, 2010.    Exhibit 3.1 to Form 10-Q, dated March 31, 2010, SEC File No. 1-12981.
4.1   Rights Agreement, dated as of June 2, 2007, between AMETEK, Inc. and American Stock Transfer & Trust Company.    Exhibit 4.1 to Form 8-K dated June 5, 2007, SEC File No. 1-12981.
4.2   AMETEK, Inc. 2007 Omnibus Incentive Compensation Plan, dated as of April 24, 2007 (the “2007 Plan”).*    Exhibit 4 to Form S-8 dated May 10, 2007, SEC File No. 1-12981.
4.3**   Amendment No. 1 to the 2007 Plan.*   
4.4   AMETEK, Inc. 2011 Omnibus Incentive Compensation Plan, dated as of May 3, 2011 (the “2011 Plan”).*    Exhibit 4 to Form S-8 dated May 6, 2011, SEC File No. 1-12981.
4.5**   Amendment No. 1 to the 2011 Plan.*   
10.1   Amended and restated AMETEK, Inc. Retirement Plan for Directors, dated as of October 24, 2007.*    Exhibit 10.4 to Form 10-Q dated September 30, 2007, SEC File No. 1-12981.
10.2   Amended and restated AMETEK, Inc. Deferred Compensation Plan dated October 24, 2007.*    Exhibit 10.6 to Form 10-Q dated September 30, 2007, SEC File No. 1-12981.
10.3   Amended and restated AMETEK, Inc. Supplemental Senior Executive Death Benefit Plan, dated as of July 25, 2007.*    Exhibit 10.1 to Form 10-Q, dated September 30, 2007, SEC File No. 1-12981.
10.4   Amended and restated AMETEK, Inc. 2004 Executive Death Benefit Plan dated as of July 25, 2007.*    Exhibit 10.2 to Form 10-Q dated September 30, 2007, SEC File No. 1-12981.
10.5   Amended and restated AMETEK, Inc. Death Benefit Program for Directors dated as of October 24, 2007.*    Exhibit 10.3 to Form 10-Q dated September 30, 2007, SEC File No. 1-12981.
10.6   Form of amended and restated Termination and Change of Control Agreement between AMETEK, Inc. and a named executive, dated October 24, 2007.*    Exhibit 10.7 to Form 10-Q dated September 30, 2007, SEC File No. 1-12981.
10.7   Amended and restated Termination and Change of Control Agreement between AMETEK, Inc. and a named executive, dated October 24, 2007.*    Exhibit 10.8 to Form 10-Q dated September 30, 2007, SEC File No. 1-12981.
10.8   The AMETEK Retirement and Savings Plan, as amended and restated to January 1, 2002 (the “Savings Plan”).*    Exhibit 10.4 to 2003 Form 10-K, SEC File No. 1-12981.
10.9   Amendment No. 1 to the Savings Plan.*    Exhibit 10.5 to 2003 Form 10-K, SEC File No. 1-12981.

 

86


Table of Contents

Exhibit

Number

 

Description

  

Incorporated Herein by Reference to

 10.10   Form of Severance Benefit Agreement between the Company and certain executives of the Company.*    Exhibit (10) (ww) to 1989 Form 10-K, SEC File No. 1-168.
 10.11   Form of Supplemental Retirement Benefit Agreement between the Company and certain executives of the Company, dated as of May 21, 1991.*    Exhibit 10.61 to 1991 Form 10-K, SEC File No. 1-168.
 10.12   Amended and restated AMETEK, Inc. Supplemental Executive Retirement Plan dated as of October 24, 2007.*    Exhibit 10.5 to Form 10-Q dated September 30, 2007, SEC File No. 1-12981.
 10.13   1999 Stock Incentive Plan of AMETEK, Inc. (the “1999 Plan”).*    Exhibit 4.1 to Form S-8 dated June 11, 1999, SEC File No. 333-80449.
 10.14   Amendment No. 1 to the 1999 Plan.*    Exhibit 4.1 to Form S-8 dated June 11, 1999, SEC File No. 333-80449.
 10.15   Amendment No. 2 to the 1999 Plan.*    Exhibit 10.3 to Form 10-Q dated March 31, 2000, SEC File No. 1-12981.
 10.16   Amendment No. 3 to the 1999 Plan.*    Exhibit 10.1 to Form 10-Q dated June 30, 2002, SEC File No. 1-12981.
 10.17   Amendment No. 4 to the 1999 Plan.*    Exhibit 10.2 to Form 10-Q dated September 30, 2002, SEC File No. 1-12981.
 10.18   Amendment No. 5 to the 1999 Plan.*    Exhibit 10.5 to Form 10-Q dated June 30, 2004, SEC File No. 1-12981.
 10.19   Amendment No. 6 to the 1999 Plan.*    Exhibit 10.1 to Form 10-Q dated September 30, 2004, SEC File No. 1-12981.
 10.20   Amendment No. 7 to the 1999 Plan.*    Exhibit 10.3 to Form 10-Q dated September 30, 2006, SEC File No. 1-12981.
 10.21**   Amendment No. 8 to the 1999 Plan.*   
 10.22   2002 Stock Incentive Plan of AMETEK, Inc., as amended and restated as of April 25, 2007 (the “2002 Plan”).*    Exhibit 10.1 to Form 10-Q dated March 31, 2007, SEC File No. 1-12981.
 10.23**   Amendment No. 1 to the 2002 Plan.*   
 10.24   Form of amended and restated Restricted Stock Agreement between the Company and certain executives of the Company, dated October 24, 2007.*    Exhibit 10.9 to Form 10-Q dated September 30, 2007, SEC File No. 1-12981.
 10.25   Credit Agreement dated as of September 22, 2011 among AMETEK, Inc., JPMorgan Chase Bank, N.A., as Administrative Agent and Bank of America, N.A., PNC Bank, National Association, SunTrust Bank and Wells Fargo Bank, National Association, as Co-Syndication Agents.    Exhibit 10.1 to Form 8-K dated September 27, 2011, SEC File No. 1-12981.
 10.26   Note Purchase Agreement, dated as of August 30, 2007.    Exhibit 10.1 to Form 8-K dated September 5, 2007, SEC File No. 1-12981.
 10.27   Note Purchase Agreement, dated as of September 17, 2008.    Exhibit 10.1 to Form 8-K dated September 19, 2008, SEC File No. 1-12981.

 

87


Table of Contents

Exhibit

Number

 

Description

  

Incorporated Herein by Reference to

 12**   Statement regarding computation of ratio of earnings to fixed charges.   
 21**   Subsidiaries of the Registrant.   
 23**   Consent of Independent Registered Public Accounting Firm.   
 31.1**   Certification of Chief Executive Officer, Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.   
 31.2**   Certification of Chief Financial Officer, Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.   
 32.1**   Certification of Chief Executive Officer, Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.   
 32.2**   Certification of Chief Financial Officer, Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.   
101.INS**   XBRL Instance Document.   
101.SCH**   XBRL Taxonomy Extension Schema Document.   
101.CAL**   XBRL Taxonomy Extension Calculation Linkbase Document.   
101.DEF**   XBRL Taxonomy Extension Definition Linkbase Document.   
101.LAB**   XBRL Taxonomy Extension Label Linkbase Document.   
101.PRE**   XBRL Taxonomy Extension Presentation Linkbase Document.   

 

 

*

Management contract or compensatory plan required to be filed pursuant to Item 601 of Regulation S-K.

 

**

Filed with electronic submission.

 

88