How to Convert a Tennis Court to a Pickleball Court

How to Convert a Tennis Court to a Pickleball CourtPhoto from Unsplash

Originally Posted On: https://pickletile.com/how-to-convert-a-tennis-court-to-a-pickleball-court/

 

Converting a tennis court to a pickleball court involves some adjustments to the court’s dimensions and markings, as pickleball courts are smaller than tennis courts. But, a successful conversion involves more than just adding new lines and a net. 

Planning Your Tennis to Pickleball Court Conversion

Planning is important to a successful conversion project when converting a tennis court to a pickleball court. At its most basic, a conversion can be re-striping and adding a new net. But, this is not satisfactory for most people. Planning for how the new courts will be used provides for a better experience. Here are some considerations.

Number of Pickleball Courts

In many cases, a single tennis court can be converted into more than one pickleball court. It is important to plan how you want to use the finished courts. Will you want to have more than one pickleball game going simultaneously for a party or family gathering? 

While there is plenty of room for more than one court, be careful not to cram too much into your existing court footprint; as you plan your court(s) layout, be sure to allow for enough back and side run-off. 

Resurfacing The Court

You must restripe your court surface to convert your tennis court into one or more pickleball courts. To do this, the tennis court stipping should be removed or covered. This is a good time to look at resurfacing the tennis court. Resurfacing provides a blank canvas for adding your pickleball court line markings.

Fencing, Glass Barriers

Most courts have some type of border, usually fencing. Keeping the ball in the court areas is only one consideration for pickleball. Sound suppression and wind-blocking are also important concerns for pickleball that may not be as important for tennis courts. 

Court Lighting

If nighttime play is anticipated, then plan for court lighting. If the existing tennis court has lighting, this is a good time to adapt the lights with updated lighting technology. Properly installed lighting to minimize shadowing and blinding is critical to nighttime play.

Setting up the Pickleball Court

Once you have your conversion plan set, it is time to build out your courts. Here’s a step-by-step guide on how to convert a tennis court into a pickleball court: 

 

  • Measure the Court: A standard tennis court is larger than a pickleball court. A tennis court measures 78 feet in length and 36 feet in width for singles, whereas a pickleball court is 44 feet in length and 20 feet in width. Identify the area of the tennis court where the pickleball court will be created.
  • Mark the New Boundaries: Using masking tape or paint suitable for the court surface, mark the new boundaries for the pickleball court. For a singles pickleball court, the dimensions will be 44 feet in length and 20 feet in width. For doubles, you can create two side-by-side pickleball courts within the existing tennis court, as each pickleball court measures 44 feet by 20 feet.
  • Adjust the Net Posts: For singles, the net posts need to be moved to the new width of the court (20 feet). For doubles, you can set up two pickleball nets side by side within the width of the existing tennis net.
  • Place the Pickleball Net: Adjust the net to the correct height for pickleball, which is 34 inches at the center and 36 inches at the sidelines.
  • Add Court Dimensions & Markings: Paint or mark the pickleball court’s lines within the new boundaries. A pickleball court has specific lines for the kitchen (non-volley zone), service areas, and boundaries, so ensure accurate marking.
    • Baseline: 20 feet from the net on both sides.
    • Sidelines: 44 feet in length.
    • Non-Volley Zone (Kitchen): This area is 7 feet from the net on both sides and is marked by a distinct line parallel to the net.
  • Check Specifications: Verify that the court dimensions, net height, and court markings comply with official pickleball regulations for accurate gameplay.
  • Test and Adjust: Once all the modifications are made, test the court to ensure accuracy and proper dimensions for pickleball gameplay

Remember, converting a tennis court to a pickleball court involves altering the dimensions and markings, so measuring and marking the court accurately to meet pickleball standards before play is essential. If unsure, consulting a professional or someone familiar with pickleball court specifications can be helpful.

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.